added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_ONSEMI/TARGET_NCS36510/gpio_map.h
- Revision:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_ONSEMI/TARGET_NCS36510/gpio_map.h Fri Sep 02 15:07:44 2016 +0100 @@ -0,0 +1,59 @@ +/** + ****************************************************************************** + * @file gpio_map.h + * @brief GPIO HW register map + * @internal + * @author ON Semiconductor + * $Rev: 2115 $ + * $Date: 2013-07-17 18:08:17 +0530 (Wed, 17 Jul 2013) $ + ****************************************************************************** + * @copyright (c) 2012 ON Semiconductor. All rights reserved. + * ON Semiconductor is supplying this software for use with ON Semiconductor + * processor based microcontrollers only. + * + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, + * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * @endinternal + * + * @ingroup gpio + * + * @details + * <p> + * GPIO HW register map description + * </p> + * + * <h1> Reference document(s) </h1> + * <p> + * <a href="../pdf/IPC7203_GPIO_APB_DS_v1P1.pdf" target="_blank"> + * Reference document: IPC7203 APB GPIO Design Specification v1.2</a> + * </p> + */ + +#ifndef GPIO_MAP_H_ +#define GPIO_MAP_H_ + +#include "architecture.h" + +/** Structure overlay for GPIO control registers, see memory_map.h + * For most registers, bit lockations match GPIO numbers.*/ +typedef struct { + __IO uint32_t R_STATE_W_SET; /**< Read synchronized input / Write ones to bits to set corresponding output IO's*/ + __IO uint32_t R_IRQ_W_CLEAR; /**< Read state of irq / Write ones to bits to clear corresponging output IO's */ + __IO uint32_t W_OUT; /**< Write ones to set direction to output */ + __IO uint32_t W_IN; /**< Write ones to set direction to input */ + __IO uint32_t IRQ_ENABLE_SET; /**< Read active high irq enable / Write ones to enable irq */ + __IO uint32_t IRQ_ENABLE_CLEAR; /**< Read active high irq enable / Write ones to disable irq */ + __IO uint32_t IRQ_EDGE; /**< Read irq configuration (edge or level) / Write ones to set irq to edge-sensitive */ + __IO uint32_t IRQ_LEVEL; /**< Read irq configuration (edge or level) / Write ones to set irq to level-sensitive */ + __IO uint32_t IRQ_POLARITY_SET; /**< Read irq polarity / Write ones to set irq to active high or rising edge */ + __IO uint32_t IRQ_POLARITY_CLEAR; /**< Read irq polarity / Write ones to set interrupts to active low or falling edge */ + __IO uint32_t ANYEDGE_SET; /**< Read irq anyedge configuration / Write ones to override irq edge selection & irq on any edge */ + __IO uint32_t ANYEDGE_CLEAR; /**< Read irq anyedge configuration / Write ones to clear edge selection override */ + __IO uint32_t IRQ_CLEAR; /**< Write ones to clear edge-sensitive irq */ + __IO uint32_t CONTROL; /**< Controls loopback/normal mode selection */ +} GpioReg_t, *GpioReg_pt; + +#endif /* GPIO_MAP_H_ */