added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_NXP/TARGET_LPC2460/PeripheralNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_NXP/TARGET_LPC2460/PeripheralNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC2460/PeripheralNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,120 +1,120 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2015 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_PERIPHERALNAMES_H -#define MBED_PERIPHERALNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef enum { - UART_0 = (int)LPC_UART0_BASE, - UART_1 = (int)LPC_UART1_BASE, - UART_2 = (int)LPC_UART2_BASE, - UART_3 = (int)LPC_UART3_BASE -} UARTName; - -typedef enum { - ADC0_0 = 0, - ADC0_1, - ADC0_2, - ADC0_3, - ADC0_4, - ADC0_5, - ADC0_6, - ADC0_7 -} ADCName; - -typedef enum { - DAC_0 = 0 -} DACName; - -typedef enum { - SPI_0 = (int)LPC_SSP0_BASE, - SPI_1 = (int)LPC_SSP1_BASE -} SPIName; - -typedef enum { - I2C_0 = (int)LPC_I2C0_BASE, - I2C_1 = (int)LPC_I2C1_BASE, - I2C_2 = (int)LPC_I2C2_BASE -} I2CName; - -typedef enum { - PWM_1 = 1, - PWM_2, - PWM_3, - PWM_4, - PWM_5, - PWM_6 -} PWMName; - -typedef enum { - CAN_1 = (int)LPC_CAN1_BASE, - CAN_2 = (int)LPC_CAN2_BASE -} CANName; - -#define STDIO_UART_TX USBTX -#define STDIO_UART_RX USBRX -#define STDIO_UART UART_2 - -// Default peripherals -#define MBED_SPI0 p5, p6, p7, p8 -//#define MBED_SPI1 p11, p12, p13, p14 - -#define MBED_UART0 p9, p10 -#define MBED_UART1 p13, p14 -#define MBED_UART2 p15, p16 -#define MBED_UARTUSB USBTX, USBRX - -#define MBED_I2C0 p17, p18 -//#define MBED_I2C1 p9, p10 - -#define MBED_CAN0 p19, p20 - -#define MBED_ANALOGOUT0 p21 - -#define MBED_ANALOGIN0 p22 -#define MBED_ANALOGIN1 p23 -//#define MBED_ANALOGIN2 p17 -//#define MBED_ANALOGIN3 p18 -//#define MBED_ANALOGIN4 p19 -//#define MBED_ANALOGIN5 p20 - -#define MBED_PWMOUT0 p24 -#define MBED_PWMOUT1 p25 -#define MBED_PWMOUT2 p26 -#define MBED_PWMOUT3 p27 -//#define MBED_PWMOUT4 p22 -//#define MBED_PWMOUT5 p21 - -#define MBED_USB_D_PLUS p28 -#define MBED_USB_D_MINUS p29 - -#define MBED_MCICLK p30 -#define MBED_MCICMD p31 -#define MBED_MCIDAT0 p32 -#define MBED_MCIDAT1 p33 -#define MBED_MCIDAT2 p34 -#define MBED_MCIDAT3 p35 - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + UART_0 = (int)LPC_UART0_BASE, + UART_1 = (int)LPC_UART1_BASE, + UART_2 = (int)LPC_UART2_BASE, + UART_3 = (int)LPC_UART3_BASE +} UARTName; + +typedef enum { + ADC0_0 = 0, + ADC0_1, + ADC0_2, + ADC0_3, + ADC0_4, + ADC0_5, + ADC0_6, + ADC0_7 +} ADCName; + +typedef enum { + DAC_0 = 0 +} DACName; + +typedef enum { + SPI_0 = (int)LPC_SSP0_BASE, + SPI_1 = (int)LPC_SSP1_BASE +} SPIName; + +typedef enum { + I2C_0 = (int)LPC_I2C0_BASE, + I2C_1 = (int)LPC_I2C1_BASE, + I2C_2 = (int)LPC_I2C2_BASE +} I2CName; + +typedef enum { + PWM_1 = 1, + PWM_2, + PWM_3, + PWM_4, + PWM_5, + PWM_6 +} PWMName; + +typedef enum { + CAN_1 = (int)LPC_CAN1_BASE, + CAN_2 = (int)LPC_CAN2_BASE +} CANName; + +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX +#define STDIO_UART UART_2 + +// Default peripherals +#define MBED_SPI0 p5, p6, p7, p8 +//#define MBED_SPI1 p11, p12, p13, p14 + +#define MBED_UART0 p9, p10 +#define MBED_UART1 p13, p14 +#define MBED_UART2 p15, p16 +#define MBED_UARTUSB USBTX, USBRX + +#define MBED_I2C0 p17, p18 +//#define MBED_I2C1 p9, p10 + +#define MBED_CAN0 p19, p20 + +#define MBED_ANALOGOUT0 p21 + +#define MBED_ANALOGIN0 p22 +#define MBED_ANALOGIN1 p23 +//#define MBED_ANALOGIN2 p17 +//#define MBED_ANALOGIN3 p18 +//#define MBED_ANALOGIN4 p19 +//#define MBED_ANALOGIN5 p20 + +#define MBED_PWMOUT0 p24 +#define MBED_PWMOUT1 p25 +#define MBED_PWMOUT2 p26 +#define MBED_PWMOUT3 p27 +//#define MBED_PWMOUT4 p22 +//#define MBED_PWMOUT5 p21 + +#define MBED_USB_D_PLUS p28 +#define MBED_USB_D_MINUS p29 + +#define MBED_MCICLK p30 +#define MBED_MCICMD p31 +#define MBED_MCIDAT0 p32 +#define MBED_MCIDAT1 p33 +#define MBED_MCIDAT2 p34 +#define MBED_MCIDAT3 p35 + +#ifdef __cplusplus +} +#endif + +#endif