Johannes Stratmann
added prescaler for 16 bit pwm in LPC1347 target
Fork of
mbed-dev
by 
mbed official
Diff: targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_K66F/drivers/fsl_flash.h
- Revision:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_KSDK2_MCUS/TARGET_K66F/drivers/fsl_flash.h Fri Sep 02 15:07:44 2016 +0100
@@ -0,0 +1,1177 @@
+/*
+ * Copyright (c) 2013-2016, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_FLASH_H_
+#define _FSL_FLASH_H_
+
+#if (defined(BL_TARGET_FLASH) || defined(BL_TARGET_ROM) || defined(BL_TARGET_RAM))
+#include <assert.h>
+#include <string.h>
+#include "fsl_device_registers.h"
+#include "bootloader_common.h"
+#else
+#include "fsl_common.h"
+#endif
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*!
+ * @addtogroup flash_driver
+ * @{
+ */
+
+/*!
+ * @name Flash version
+ * @{
+ */
+/*! @brief Construct the version number for drivers. */
+#if !defined(MAKE_VERSION)
+#define MAKE_VERSION(major, minor, bugfix) (((major) << 16) | ((minor) << 8) | (bugfix))
+#endif
+
+/*! @brief FLASH driver version for SDK*/
+#define FSL_FLASH_DRIVER_VERSION (MAKE_VERSION(2, 1, 0)) /*!< Version 2.1.0. */
+
+/*! @brief FLASH driver version for ROM*/
+enum _flash_driver_version_constants
+{
+ kFLASH_driverVersionName = 'F', /*!< Flash driver version name.*/
+ kFLASH_driverVersionMajor = 2, /*!< Major flash driver version.*/
+ kFLASH_driverVersionMinor = 1, /*!< Minor flash driver version.*/
+ kFLASH_driverVersionBugfix = 0 /*!< Bugfix for flash driver version.*/
+};
+/*@}*/
+
+/*!
+ * @name Flash configuration
+ * @{
+ */
+/*! @brief Whether to support FlexNVM in flash driver */
+#if !defined(FLASH_SSD_CONFIG_ENABLE_FLEXNVM_SUPPORT)
+#define FLASH_SSD_CONFIG_ENABLE_FLEXNVM_SUPPORT 1 /*!< Enable FlexNVM support by default. */
+#endif
+
+/*! @brief Whether the FlexNVM is enabled in flash driver */
+#define FLASH_SSD_IS_FLEXNVM_ENABLED (FLASH_SSD_CONFIG_ENABLE_FLEXNVM_SUPPORT && FSL_FEATURE_FLASH_HAS_FLEX_NVM)
+
+/*! @brief Flash driver location. */
+#if !defined(FLASH_DRIVER_IS_FLASH_RESIDENT)
+#if (!defined(BL_TARGET_ROM) && !defined(BL_TARGET_RAM))
+#define FLASH_DRIVER_IS_FLASH_RESIDENT 1 /*!< Used for flash resident application. */
+#else
+#define FLASH_DRIVER_IS_FLASH_RESIDENT 0 /*!< Used for non-flash resident application. */
+#endif
+#endif
+
+/*! @brief Flash Driver Export option */
+#if !defined(FLASH_DRIVER_IS_EXPORTED)
+#if (defined(BL_TARGET_ROM) || defined(BL_TARGET_FLASH))
+#define FLASH_DRIVER_IS_EXPORTED 1 /*!< Used for ROM bootloader. */
+#else
+#define FLASH_DRIVER_IS_EXPORTED 0 /*!< Used for SDK application. */
+#endif
+#endif
+/*@}*/
+
+/*!
+ * @name Flash status
+ * @{
+ */
+/*! @brief Flash driver status group. */
+#if defined(kStatusGroup_FlashDriver)
+#define kStatusGroupGeneric kStatusGroup_Generic
+#define kStatusGroupFlashDriver kStatusGroup_FlashDriver
+#elif defined(kStatusGroup_FLASH)
+#define kStatusGroupGeneric kStatusGroup_Generic
+#define kStatusGroupFlashDriver kStatusGroup_FLASH
+#else
+#define kStatusGroupGeneric 0
+#define kStatusGroupFlashDriver 1
+#endif
+
+/*! @brief Construct a status code value from a group and code number. */
+#if !defined(MAKE_STATUS)
+#define MAKE_STATUS(group, code) ((((group)*100) + (code)))
+#endif
+
+/*!
+ * @brief Flash driver status codes.
+ */
+enum _flash_status
+{
+ kStatus_FLASH_Success = MAKE_STATUS(kStatusGroupGeneric, 0), /*!< Api is executed successfully*/
+ kStatus_FLASH_InvalidArgument = MAKE_STATUS(kStatusGroupGeneric, 4), /*!< Invalid argument*/
+ kStatus_FLASH_SizeError = MAKE_STATUS(kStatusGroupFlashDriver, 0), /*!< Error size*/
+ kStatus_FLASH_AlignmentError =
+ MAKE_STATUS(kStatusGroupFlashDriver, 1), /*!< Parameter is not aligned with specified baseline*/
+ kStatus_FLASH_AddressError = MAKE_STATUS(kStatusGroupFlashDriver, 2), /*!< Address is out of range */
+ kStatus_FLASH_AccessError =
+ MAKE_STATUS(kStatusGroupFlashDriver, 3), /*!< Invalid instruction codes and out-of bounds addresses */
+ kStatus_FLASH_ProtectionViolation = MAKE_STATUS(
+ kStatusGroupFlashDriver, 4), /*!< The program/erase operation is requested to execute on protected areas */
+ kStatus_FLASH_CommandFailure =
+ MAKE_STATUS(kStatusGroupFlashDriver, 5), /*!< Run-time error during command execution. */
+ kStatus_FLASH_UnknownProperty = MAKE_STATUS(kStatusGroupFlashDriver, 6), /*!< Unknown property.*/
+ kStatus_FLASH_EraseKeyError = MAKE_STATUS(kStatusGroupFlashDriver, 7), /*!< Api erase key is invalid.*/
+ kStatus_FLASH_RegionExecuteOnly = MAKE_STATUS(kStatusGroupFlashDriver, 8), /*!< Current region is execute only.*/
+ kStatus_FLASH_ExecuteInRamFunctionNotReady =
+ MAKE_STATUS(kStatusGroupFlashDriver, 9), /*!< Execute-in-ram function is not available.*/
+ kStatus_FLASH_PartitionStatusUpdateFailure =
+ MAKE_STATUS(kStatusGroupFlashDriver, 10), /*!< Failed to update partition status.*/
+ kStatus_FLASH_SetFlexramAsEepromError =
+ MAKE_STATUS(kStatusGroupFlashDriver, 11), /*!< Failed to set flexram as eeprom.*/
+ kStatus_FLASH_RecoverFlexramAsRamError =
+ MAKE_STATUS(kStatusGroupFlashDriver, 12), /*!< Failed to recover flexram as ram.*/
+ kStatus_FLASH_SetFlexramAsRamError = MAKE_STATUS(kStatusGroupFlashDriver, 13), /*!< Failed to set flexram as ram.*/
+ kStatus_FLASH_RecoverFlexramAsEepromError =
+ MAKE_STATUS(kStatusGroupFlashDriver, 14), /*!< Failed to recover flexram as eeprom.*/
+ kStatus_FLASH_CommandNotSupported = MAKE_STATUS(kStatusGroupFlashDriver, 15), /*!< Flash api is not supported.*/
+ kStatus_FLASH_SwapSystemNotInUninitialized =
+ MAKE_STATUS(kStatusGroupFlashDriver, 16), /*!< Swap system is not in uninitialzed state.*/
+ kStatus_FLASH_SwapIndicatorAddressError =
+ MAKE_STATUS(kStatusGroupFlashDriver, 17), /*!< Swap indicator address is invalid.*/
+};
+/*@}*/
+
+/*!
+ * @name Flash API key
+ * @{
+ */
+/*! @brief Construct the four char code for flash driver API key. */
+#if !defined(FOUR_CHAR_CODE)
+#define FOUR_CHAR_CODE(a, b, c, d) (((d) << 24) | ((c) << 16) | ((b) << 8) | ((a)))
+#endif
+
+/*!
+ * @brief Enumeration for flash driver API keys.
+ *
+ * @note The resulting value is built with a byte order such that the string
+ * being readable in expected order when viewed in a hex editor, if the value
+ * is treated as a 32-bit little endian value.
+ */
+enum _flash_driver_api_keys
+{
+ kFLASH_apiEraseKey = FOUR_CHAR_CODE('k', 'f', 'e', 'k') /*!< Key value used to validate all flash erase APIs.*/
+};
+/*@}*/
+
+/*!
+ * @brief Enumeration for supported flash margin levels.
+ */
+typedef enum _flash_margin_value
+{
+ kFLASH_marginValueNormal, /*!< Use the 'normal' read level for 1s.*/
+ kFLASH_marginValueUser, /*!< Apply the 'User' margin to the normal read-1 level.*/
+ kFLASH_marginValueFactory, /*!< Apply the 'Factory' margin to the normal read-1 level.*/
+ kFLASH_marginValueInvalid /*!< Not real margin level, Used to determine the range of valid margin level. */
+} flash_margin_value_t;
+
+/*!
+ * @brief Enumeration for the three possible flash security states.
+ */
+typedef enum _flash_security_state
+{
+ kFLASH_securityStateNotSecure, /*!< Flash is not secure.*/
+ kFLASH_securityStateBackdoorEnabled, /*!< Flash backdoor is enabled.*/
+ kFLASH_securityStateBackdoorDisabled /*!< Flash backdoor is disabled.*/
+} flash_security_state_t;
+
+/*!
+ * @brief Enumeration for the three possible flash protection levels.
+ */
+typedef enum _flash_protection_state
+{
+ kFLASH_protectionStateUnprotected, /*!< Flash region is not protected.*/
+ kFLASH_protectionStateProtected, /*!< Flash region is protected.*/
+ kFLASH_protectionStateMixed /*!< Flash is mixed with protected and unprotected region.*/
+} flash_protection_state_t;
+
+/*!
+ * @brief Enumeration for the three possible flash execute access levels.
+ */
+typedef enum _flash_execute_only_access_state
+{
+ kFLASH_accessStateUnLimited, /*!< Flash region is unLimited.*/
+ kFLASH_accessStateExecuteOnly, /*!< Flash region is execute only.*/
+ kFLASH_accessStateMixed /*!< Flash is mixed with unLimited and execute only region.*/
+} flash_execute_only_access_state_t;
+
+/*!
+ * @brief Enumeration for various flash properties.
+ */
+typedef enum _flash_property_tag
+{
+ kFLASH_propertyPflashSectorSize = 0x00U, /*!< Pflash sector size property.*/
+ kFLASH_propertyPflashTotalSize = 0x01U, /*!< Pflash total size property.*/
+ kFLASH_propertyPflashBlockSize = 0x02U, /*!< Pflash block size property.*/
+ kFLASH_propertyPflashBlockCount = 0x03U, /*!< Pflash block count property.*/
+ kFLASH_propertyPflashBlockBaseAddr = 0x04U, /*!< Pflash block base address property.*/
+ kFLASH_propertyPflashFacSupport = 0x05U, /*!< Pflash fac support property.*/
+ kFLASH_propertyPflashAccessSegmentSize = 0x06U, /*!< Pflash access segment size property.*/
+ kFLASH_propertyPflashAccessSegmentCount = 0x07U, /*!< Pflash access segment count property.*/
+ kFLASH_propertyFlexRamBlockBaseAddr = 0x08U, /*!< FlexRam block base address property.*/
+ kFLASH_propertyFlexRamTotalSize = 0x09U, /*!< FlexRam total size property.*/
+ kFLASH_propertyDflashSectorSize = 0x10U, /*!< Dflash sector size property.*/
+ kFLASH_propertyDflashTotalSize = 0x11U, /*!< Dflash total size property.*/
+ kFLASH_propertyDflashBlockSize = 0x12U, /*!< Dflash block count property.*/
+ kFLASH_propertyDflashBlockCount = 0x13U, /*!< Dflash block base address property.*/
+ kFLASH_propertyDflashBlockBaseAddr = 0x14U, /*!< Eeprom total size property.*/
+ kFLASH_propertyEepromTotalSize = 0x15U
+} flash_property_tag_t;
+
+/*!
+ * @brief Constants for execute-in-ram flash function.
+ */
+enum _flash_execute_in_ram_function_constants
+{
+ kFLASH_executeInRamFunctionMaxSize = 64U, /*!< Max size of execute-in-ram function.*/
+ kFLASH_executeInRamFunctionTotalNum = 2U /*!< Total number of execute-in-ram functions.*/
+};
+
+/*!
+ * @brief Flash execute-in-ram function information.
+ */
+typedef struct _flash_execute_in_ram_function_config
+{
+ uint32_t activeFunctionCount; /*!< Number of available execute-in-ram functions.*/
+ uint8_t *flashRunCommand; /*!< execute-in-ram function: flash_run_command.*/
+ uint8_t *flashCacheClearCommand; /*!< execute-in-ram function: flash_cache_clear_command.*/
+} flash_execute_in_ram_function_config_t;
+
+/*!
+ * @brief Enumeration for the two possible options of flash read resource command.
+ */
+typedef enum _flash_read_resource_option
+{
+ kFLASH_resourceOptionFlashIfr =
+ 0x00U, /*!< Select code for Program flash 0 IFR, Program flash swap 0 IFR, Data flash 0 IFR */
+ kFLASH_resourceOptionVersionId = 0x01U /*!< Select code for Version ID*/
+} flash_read_resource_option_t;
+
+/*!
+ * @brief Enumeration for the range of special-purpose flash resource
+ */
+enum _flash_read_resource_range
+{
+#if (FSL_FEATURE_FLASH_IS_FTFE == 1)
+ kFLASH_resourceRangePflashIfrSizeInBytes = 1024U, /*!< Pflash IFR size in byte.*/
+ kFLASH_resourceRangeVersionIdSizeInBytes = 8U, /*!< Version ID IFR size in byte.*/
+ kFLASH_resourceRangeVersionIdStart = 0x08U, /*!< Version ID IFR start address.*/
+ kFLASH_resourceRangeVersionIdEnd = 0x0FU, /*!< Version ID IFR end address.*/
+#else /* FSL_FEATURE_FLASH_IS_FTFL == 1 or FSL_FEATURE_FLASH_IS_FTFA = =1 */
+ kFLASH_resourceRangePflashIfrSizeInBytes = 256U, /*!< Pflash IFR size in byte.*/
+ kFLASH_resourceRangeVersionIdSizeInBytes = 8U, /*!< Version ID IFR size in byte.*/
+ kFLASH_resourceRangeVersionIdStart = 0x00U, /*!< Version ID IFR start address.*/
+ kFLASH_resourceRangeVersionIdEnd = 0x07U, /*!< Version ID IFR end address.*/
+#endif
+ kFLASH_resourceRangePflashSwapIfrStart = 0x40000U, /*!< Pflash swap IFR start address.*/
+ kFLASH_resourceRangePflashSwapIfrEnd = 0x403FFU, /*!< Pflash swap IFR end address.*/
+ kFLASH_resourceRangeDflashIfrStart = 0x800000U, /*!< Dflash IFR start address.*/
+ kFLASH_resourceRangeDflashIfrEnd = 0x8003FFU, /*!< Dflash IFR end address.*/
+};
+
+/*!
+ * @brief Enumeration for the two possilbe options of set flexram function command.
+ */
+typedef enum _flash_flexram_function_option
+{
+ kFLASH_flexramFunctionOptionAvailableAsRam = 0xFFU, /*!< Option used to make FlexRAM available as RAM */
+ kFLASH_flexramFunctionOptionAvailableForEeprom = 0x00U /*!< Option used to make FlexRAM available for EEPROM */
+} flash_flexram_function_option_t;
+
+/*!
+ * @brief Enumeration for the possible options of Swap function
+ */
+typedef enum _flash_swap_function_option
+{
+ kFLASH_swapFunctionOptionEnable = 0x00U, /*!< Option used to enable Swap function */
+ kFLASH_swapFunctionOptionDisable = 0x01U /*!< Option used to Disable Swap function */
+} flash_swap_function_option_t;
+
+/*!
+ * @brief Enumeration for the possible options of Swap Control commands
+ */
+typedef enum _flash_swap_control_option
+{
+ kFLASH_swapControlOptionIntializeSystem = 0x01U, /*!< Option used to Intialize Swap System */
+ kFLASH_swapControlOptionSetInUpdateState = 0x02U, /*!< Option used to Set Swap in Update State */
+ kFLASH_swapControlOptionSetInCompleteState = 0x04U, /*!< Option used to Set Swap in Complete State */
+ kFLASH_swapControlOptionReportStatus = 0x08U, /*!< Option used to Report Swap Status */
+ kFLASH_swapControlOptionDisableSystem = 0x10U /*!< Option used to Disable Swap Status */
+} flash_swap_control_option_t;
+
+/*!
+ * @brief Enumeration for the possible flash swap status.
+ */
+typedef enum _flash_swap_state
+{
+ kFLASH_swapStateUninitialized = 0x00U, /*!< Flash swap system is in uninitialized state.*/
+ kFLASH_swapStateReady = 0x01U, /*!< Flash swap system is in ready state.*/
+ kFLASH_swapStateUpdate = 0x02U, /*!< Flash swap system is in update state.*/
+ kFLASH_swapStateUpdateErased = 0x03U, /*!< Flash swap system is in updateErased state.*/
+ kFLASH_swapStateComplete = 0x04U, /*!< Flash swap system is in complete state.*/
+ kFLASH_swapStateDisabled = 0x05U /*!< Flash swap system is in disabled state.*/
+} flash_swap_state_t;
+
+/*!
+ * @breif Enumeration for the possible flash swap block status
+ */
+typedef enum _flash_swap_block_status
+{
+ kFLASH_swapBlockStatusLowerHalfProgramBlocksAtZero =
+ 0x00U, /*!< Swap block status is that lower half program block at zero.*/
+ kFLASH_swapBlockStatusUpperHalfProgramBlocksAtZero =
+ 0x01U, /*!< Swap block status is that upper half program block at zero.*/
+} flash_swap_block_status_t;
+
+/*!
+ * @brief Flash Swap information.
+ */
+typedef struct _flash_swap_state_config
+{
+ flash_swap_state_t flashSwapState; /*!< Current swap system status.*/
+ flash_swap_block_status_t currentSwapBlockStatus; /*!< Current swap block status.*/
+ flash_swap_block_status_t nextSwapBlockStatus; /*!< Next swap block status.*/
+} flash_swap_state_config_t;
+
+/*!
+ * @brief Flash Swap IFR fileds.
+ */
+typedef struct _flash_swap_ifr_field_config
+{
+ uint16_t swapIndicatorAddress; /*!< Swap indicator address field.*/
+ uint16_t swapEnableWord; /*!< Swap enable word field.*/
+ uint8_t reserved0[6]; /*!< Reserved field.*/
+ uint16_t swapDisableWord; /*!< Swap disable word field.*/
+ uint8_t reserved1[4]; /*!< Reserved field.*/
+} flash_swap_ifr_field_config_t;
+
+/*!
+ * @brief Enumeration for FlexRAM load during reset option.
+ */
+typedef enum _flash_partition_flexram_load_option
+{
+ kFLASH_partitionFlexramLoadOptionLoadedWithValidEepromData =
+ 0x00U, /*!< FlexRAM is loaded with valid EEPROM data during reset sequence.*/
+ kFLASH_partitionFlexramLoadOptionNotLoaded = 0x01U /*!< FlexRAM is not loaded during reset sequence.*/
+} flash_partition_flexram_load_option_t;
+
+/*! @brief callback type used for pflash block*/
+typedef void (*flash_callback_t)(void);
+
+/*!
+ * @brief Active flash information for current operation.
+ */
+typedef struct _flash_operation_config
+{
+ uint32_t convertedAddress; /*!< Converted address for current flash type.*/
+ uint32_t activeSectorSize; /*!< Sector size of current flash type.*/
+ uint32_t activeBlockSize; /*!< Block size of current flash type.*/
+ uint32_t blockWriteUnitSize; /*!< write unit size.*/
+ uint32_t sectorCmdAddressAligment; /*!< Erase sector command address alignment.*/
+ uint32_t sectionCmdAddressAligment; /*!< Program/Verify section command address alignment.*/
+ uint32_t resourceCmdAddressAligment; /*!< Read resource command address alignment.*/
+ uint32_t checkCmdAddressAligment; /*!< Program check command address alignment.*/
+} flash_operation_config_t;
+
+/*! @brief Flash driver state information.
+ *
+ * An instance of this structure is allocated by the user of the flash driver and
+ * passed into each of the driver APIs.
+ */
+typedef struct _flash_config
+{
+ uint32_t PFlashBlockBase; /*!< Base address of the first PFlash block */
+ uint32_t PFlashTotalSize; /*!< Size of all combined PFlash block. */
+ uint32_t PFlashBlockCount; /*!< Number of PFlash blocks. */
+ uint32_t PFlashSectorSize; /*!< Size in bytes of a sector of PFlash. */
+ flash_callback_t PFlashCallback; /*!< Callback function for flash API. */
+ uint32_t PFlashAccessSegmentSize; /*!< Size in bytes of a access segment of PFlash. */
+ uint32_t PFlashAccessSegmentCount; /*!< Number of PFlash access segments. */
+ uint32_t *flashExecuteInRamFunctionInfo; /*!< Info struct of flash execute-in-ram function. */
+ uint32_t FlexRAMBlockBase; /*!< For FlexNVM device, this is the base address of FlexRAM
+ For non-FlexNVM device, this is the base address of acceleration RAM memory */
+ uint32_t FlexRAMTotalSize; /*!< For FlexNVM device, this is the size of FlexRAM
+ For non-FlexNVM device, this is the size of acceleration RAM memory */
+ uint32_t DFlashBlockBase; /*!< For FlexNVM device, this is the base address of D-Flash memory (FlexNVM memory);
+ For non-FlexNVM device, this field is unused */
+ uint32_t DFlashTotalSize; /*!< For FlexNVM device, this is total size of the FlexNVM memory;
+ For non-FlexNVM device, this field is unused */
+ uint32_t EEpromTotalSize; /*!< For FlexNVM device, this is the size in byte of EEPROM area which was partitioned
+ from FlexRAM;
+ For non-FlexNVM device, this field is unused */
+} flash_config_t;
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name Initialization
+ * @{
+ */
+
+/*!
+ * @brief Initializes global flash properties structure members
+ *
+ * This function checks and initializes Flash module for the other Flash APIs.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_PartitionStatusUpdateFailure Failed to update partition status.
+ */
+status_t FLASH_Init(flash_config_t *config);
+
+/*!
+ * @brief Set the desired flash callback function
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param callback callback function to be stored in driver
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ */
+status_t FLASH_SetCallback(flash_config_t *config, flash_callback_t callback);
+
+/*!
+ * @brief Prepare flash execute-in-ram functions
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ */
+#if FLASH_DRIVER_IS_FLASH_RESIDENT
+status_t FLASH_PrepareExecuteInRamFunctions(flash_config_t *config);
+#endif
+
+/*@}*/
+
+/*!
+ * @name Erasing
+ * @{
+ */
+
+/*!
+ * @brief Erases entire flash
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param key value used to validate all flash erase APIs.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_EraseKeyError Api erase key is invalid.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ * @retval #kStatus_FLASH_PartitionStatusUpdateFailure Failed to update partition status
+ */
+status_t FLASH_EraseAll(flash_config_t *config, uint32_t key);
+
+/*!
+ * @brief Erases flash sectors encompassed by parameters passed into function
+ *
+ * This function erases the appropriate number of flash sectors based on the
+ * desired start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be erased.
+ * The start address does not need to be sector aligned but must be word-aligned.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be erased. Must be word aligned.
+ * @param key value used to validate all flash erase APIs.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ * @retval #kStatus_FLASH_EraseKeyError Api erase key is invalid.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_Erase(flash_config_t *config, uint32_t start, uint32_t lengthInBytes, uint32_t key);
+
+/*!
+ * @brief Erases entire flash, including protected sectors.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param key value used to validate all flash erase APIs.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_EraseKeyError Api erase key is invalid.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ * @retval #kStatus_FLASH_PartitionStatusUpdateFailure Failed to update partition status
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_UNSECURE_CMD) && FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_UNSECURE_CMD
+status_t FLASH_EraseAllUnsecure(flash_config_t *config, uint32_t key);
+#endif
+
+/*!
+ * @brief Erases all program flash execute-only segments defined by the FXACC registers.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param key value used to validate all flash erase APIs.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_EraseKeyError Api erase key is invalid.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_EraseAllExecuteOnlySegments(flash_config_t *config, uint32_t key);
+
+/*@}*/
+
+/*!
+ * @name Programming
+ * @{
+ */
+
+/*!
+ * @brief Programs flash with data at locations passed in through parameters
+ *
+ * This function programs the flash memory with desired data for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be programmed. Must be
+ * word-aligned.
+ * @param src Pointer to the source buffer of data that is to be programmed
+ * into the flash.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be programmed. Must be word-aligned.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_Program(flash_config_t *config, uint32_t start, uint32_t *src, uint32_t lengthInBytes);
+
+/*!
+ * @brief Programs Program Once Field through parameters
+ *
+ * This function programs the Program Once Field with desired data for a given
+ * flash area as determined by the index and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param index The index indicating which area of Program Once Field to be programmed.
+ * @param src Pointer to the source buffer of data that is to be programmed
+ * into the Program Once Field.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be programmed. Must be word-aligned.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_ProgramOnce(flash_config_t *config, uint32_t index, uint32_t *src, uint32_t lengthInBytes);
+
+/*!
+ * @brief Programs flash with data at locations passed in through parameters via Program Section command
+ *
+ * This function programs the flash memory with desired data for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be programmed. Must be
+ * word-aligned.
+ * @param src Pointer to the source buffer of data that is to be programmed
+ * into the flash.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be programmed. Must be word-aligned.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ * @retval #kStatus_FLASH_SetFlexramAsRamError Failed to set flexram as ram
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ * @retval #kStatus_FLASH_RecoverFlexramAsEepromError Failed to recover flexram as eeprom
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_PROGRAM_SECTION_CMD) && FSL_FEATURE_FLASH_HAS_PROGRAM_SECTION_CMD
+status_t FLASH_ProgramSection(flash_config_t *config, uint32_t start, uint32_t *src, uint32_t lengthInBytes);
+#endif
+
+/*!
+ * @brief Programs EEPROM with data at locations passed in through parameters
+ *
+ * This function programs the Emulated EEPROM with desired data for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be programmed. Must be
+ * word-aligned.
+ * @param src Pointer to the source buffer of data that is to be programmed
+ * into the flash.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be programmed. Must be word-aligned.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ * @retval #kStatus_FLASH_SetFlexramAsEepromError Failed to set flexram as eeprom.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_RecoverFlexramAsRamError Failed to recover flexram as ram
+ */
+#if FLASH_SSD_IS_FLEXNVM_ENABLED
+status_t FLASH_EepromWrite(flash_config_t *config, uint32_t start, uint8_t *src, uint32_t lengthInBytes);
+#endif
+
+/*@}*/
+
+/*!
+ * @name Reading
+ * @{
+ */
+
+/*!
+ * @brief Read resource with data at locations passed in through parameters
+ *
+ * This function reads the flash memory with desired location for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be programmed. Must be
+ * word-aligned.
+ * @param dst Pointer to the destination buffer of data that is used to store
+ * data to be read.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be read. Must be word-aligned.
+ * @param option The resource option which indicates which area should be read back.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_READ_RESOURCE_CMD) && FSL_FEATURE_FLASH_HAS_READ_RESOURCE_CMD
+status_t FLASH_ReadResource(
+ flash_config_t *config, uint32_t start, uint32_t *dst, uint32_t lengthInBytes, flash_read_resource_option_t option);
+#endif
+
+/*!
+ * @brief Read Program Once Field through parameters
+ *
+ * This function reads the read once feild with given index and length
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param index The index indicating the area of program once field to be read.
+ * @param dst Pointer to the destination buffer of data that is used to store
+ * data to be read.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be programmed. Must be word-aligned.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_ReadOnce(flash_config_t *config, uint32_t index, uint32_t *dst, uint32_t lengthInBytes);
+
+/*@}*/
+
+/*!
+ * @name Security
+ * @{
+ */
+
+/*!
+ * @brief Returns the security state via the pointer passed into the function
+ *
+ * This function retrieves the current Flash security status, including the
+ * security enabling state and the backdoor key enabling state.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param state Pointer to the value returned for the current security status code:
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ */
+status_t FLASH_GetSecurityState(flash_config_t *config, flash_security_state_t *state);
+
+/*!
+ * @brief Allows user to bypass security with a backdoor key
+ *
+ * If the MCU is in secured state, this function will unsecure the MCU by
+ * comparing the provided backdoor key with ones in the Flash Configuration
+ * Field.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param backdoorKey Pointer to the user buffer containing the backdoor key.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_SecurityBypass(flash_config_t *config, const uint8_t *backdoorKey);
+
+/*@}*/
+
+/*!
+ * @name Verification
+ * @{
+ */
+
+/*!
+ * @brief Verifies erasure of entire flash at specified margin level
+ *
+ * This function will check to see if the flash have been erased to the
+ * specified read margin level.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param margin Read margin choice
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_VerifyEraseAll(flash_config_t *config, flash_margin_value_t margin);
+
+/*!
+ * @brief Verifies erasure of desired flash area at specified margin level
+ *
+ * This function will check the appropriate number of flash sectors based on
+ * the desired start address and length to see if the flash have been erased
+ * to the specified read margin level.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be verified.
+ * The start address does not need to be sector aligned but must be word-aligned.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be verified. Must be word-aligned.
+ * @param margin Read margin choice
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_VerifyErase(flash_config_t *config, uint32_t start, uint32_t lengthInBytes, flash_margin_value_t margin);
+
+/*!
+ * @brief Verifies programming of desired flash area at specified margin level
+ *
+ * This function verifies the data programed in the flash memory using the
+ * Flash Program Check Command and compares it with expected data for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be verified. Must be word-aligned.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be verified. Must be word-aligned.
+ * @param expectedData Pointer to the expected data that is to be
+ * verified against.
+ * @param margin Read margin choice
+ * @param failedAddress Pointer to returned failing address.
+ * @param failedData Pointer to returned failing data. Some derivitives do
+ * not included failed data as part of the FCCOBx registers. In this
+ * case, zeros are returned upon failure.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_VerifyProgram(flash_config_t *config,
+ uint32_t start,
+ uint32_t lengthInBytes,
+ const uint32_t *expectedData,
+ flash_margin_value_t margin,
+ uint32_t *failedAddress,
+ uint32_t *failedData);
+
+/*!
+ * @brief Verifies if the program flash executeonly segments have been erased to
+ * the specified read margin level
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param margin Read margin choice
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_VerifyEraseAllExecuteOnlySegments(flash_config_t *config, flash_margin_value_t margin);
+
+/*@}*/
+
+/*!
+ * @name Protection
+ * @{
+ */
+
+/*!
+ * @brief Returns the protection state of desired flash area via the pointer passed into the function
+ *
+ * This function retrieves the current Flash protect status for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be checked. Must be word-aligned.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be checked. Must be word-aligned.
+ * @param protection_state Pointer to the value returned for the current
+ * protection status code for the desired flash area.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ */
+status_t FLASH_IsProtected(flash_config_t *config,
+ uint32_t start,
+ uint32_t lengthInBytes,
+ flash_protection_state_t *protection_state);
+
+/*!
+ * @brief Returns the access state of desired flash area via the pointer passed into the function
+ *
+ * This function retrieves the current Flash access status for a given
+ * flash area as determined by the start address and length.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param start The start address of the desired flash memory to be checked. Must be word-aligned.
+ * @param lengthInBytes The length, given in bytes (not words or long-words)
+ * to be checked. Must be word-aligned.
+ * @param access_state Pointer to the value returned for the current
+ * access status code for the desired flash area.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_AddressError Address is out of range.
+ */
+status_t FLASH_IsExecuteOnly(flash_config_t *config,
+ uint32_t start,
+ uint32_t lengthInBytes,
+ flash_execute_only_access_state_t *access_state);
+
+/*@}*/
+
+/*!
+ * @name Properties
+ * @{
+ */
+
+/*!
+ * @brief Returns the desired flash property.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param whichProperty The desired property from the list of properties in
+ * enum flash_property_tag_t
+ * @param value Pointer to the value returned for the desired flash property
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_UnknownProperty unknown property tag
+ */
+status_t FLASH_GetProperty(flash_config_t *config, flash_property_tag_t whichProperty, uint32_t *value);
+
+/*@}*/
+
+/*!
+ * @name FlexRAM
+ * @{
+ */
+
+/*!
+ * @brief Set FlexRAM Function command
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param option The option used to set work mode of FlexRAM
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_SET_FLEXRAM_FUNCTION_CMD) && FSL_FEATURE_FLASH_HAS_SET_FLEXRAM_FUNCTION_CMD
+status_t FLASH_SetFlexramFunction(flash_config_t *config, flash_flexram_function_option_t option);
+#endif
+
+/*@}*/
+
+/*!
+ * @name Swap
+ * @{
+ */
+
+/*!
+ * @brief Configure Swap function or Check the swap state of Flash Module
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param address Address used to configure the flash swap function
+ * @param option The possible option used to configure Flash Swap function or check the flash swap status
+ * @param returnInfo Pointer to the data which is used to return the information of flash swap.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_SwapIndicatorAddressError Swap indicator address is invalid
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_SWAP_CONTROL_CMD) && FSL_FEATURE_FLASH_HAS_SWAP_CONTROL_CMD
+status_t FLASH_SwapControl(flash_config_t *config,
+ uint32_t address,
+ flash_swap_control_option_t option,
+ flash_swap_state_config_t *returnInfo);
+#endif
+
+/*!
+ * @brief Swap the lower half flash with the higher half flaock
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param address Address used to configure the flash swap function
+ * @param option The possible option used to configure Flash Swap function or check the flash swap status
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_AlignmentError Parameter is not aligned with specified baseline.
+ * @retval #kStatus_FLASH_SwapIndicatorAddressError Swap indicator address is invalid
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ * @retval #kStatus_FLASH_SwapSystemNotInUninitialized Swap system is not in uninitialzed state
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_PFLASH_BLOCK_SWAP) && FSL_FEATURE_FLASH_HAS_PFLASH_BLOCK_SWAP
+status_t FLASH_Swap(flash_config_t *config, uint32_t address, flash_swap_function_option_t option);
+#endif
+
+/*!
+ * @name FlexNVM
+ * @{
+ */
+
+/*!
+ * @brief Prepares the FlexNVM block for use as data flash, EEPROM backup, or a combination of both and initializes the
+ * FlexRAM.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param option The option used to set FlexRAM load behavior during reset.
+ * @param eepromDataSizeCode Determines the amount of FlexRAM used in each of the available EEPROM subsystems.
+ * @param flexnvmPartitionCode Specifies how to split the FlexNVM block between data flash memory and EEPROM backup
+ * memory supporting EEPROM functions.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_ExecuteInRamFunctionNotReady Execute-in-ram function is not available.
+ * @retval #kStatus_FLASH_AccessError Invalid instruction codes and out-of bounds addresses.
+ * @retval #kStatus_FLASH_ProtectionViolation The program/erase operation is requested to execute on protected areas.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+#if defined(FSL_FEATURE_FLASH_HAS_PROGRAM_PARTITION_CMD) && FSL_FEATURE_FLASH_HAS_PROGRAM_PARTITION_CMD
+status_t FLASH_ProgramPartition(flash_config_t *config,
+ flash_partition_flexram_load_option_t option,
+ uint32_t eepromDataSizeCode,
+ uint32_t flexnvmPartitionCode);
+#endif
+
+/*@}*/
+
+/*!
+* @name Flash Protection Utilities
+* @{
+*/
+
+/*!
+ * @brief Set PFLASH Protection to the intended protection status.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param protectStatus The expected protect status user wants to set to PFlash protection register. Each bit is
+ * corresponding to protection of 1/32 of the total PFlash. The least significant bit is corresponding to the lowest
+ * address area of P-Flash. The most significant bit is corresponding to the highest address area of PFlash. There are
+ * two possible cases as shown below:
+ * 0: this area is protected.
+ * 1: this area is unprotected.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+status_t FLASH_PflashSetProtection(flash_config_t *config, uint32_t protectStatus);
+
+/*!
+ * @brief Get PFLASH Protection Status.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param protectStatus Protect status returned by PFlash IP. Each bit is corresponding to protection of 1/32 of the
+ * total PFlash. The least significant bit is corresponding to the lowest address area of PFlash. The most significant
+ * bit is corresponding to the highest address area of PFlash. Thee are two possible cases as below:
+ * 0: this area is protected.
+ * 1: this area is unprotected.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ */
+status_t FLASH_PflashGetProtection(flash_config_t *config, uint32_t *protectStatus);
+
+/*!
+ * @brief Set DFLASH Protection to the intended protection status.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param protectStatus The expected protect status user wants to set to DFlash protection register. Each bit is
+ * corresponding to protection of 1/8 of the total DFlash. The least significant bit is corresponding to the lowest
+ * address area of DFlash. The most significant bit is corresponding to the highest address area of DFlash. There are
+ * two possible cases as shown below:
+ * 0: this area is protected.
+ * 1: this area is unprotected.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_CommandNotSupported Flash api is not supported
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+#if FLASH_SSD_IS_FLEXNVM_ENABLED
+status_t FLASH_DflashSetProtection(flash_config_t *config, uint8_t protectStatus);
+#endif
+
+/*!
+ * @brief Get DFLASH Protection Status.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param protectStatus DFlash Protect status returned by PFlash IP. Each bit is corresponding to protection of 1/8 of
+ * the total DFlash. The least significant bit is corresponding to the lowest address area of DFlash. The most
+ * significant bit is corresponding to the highest address area of DFlash and so on. There are two possible cases as
+ * below:
+ * 0: this area is protected.
+ * 1: this area is unprotected.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_CommandNotSupported Flash api is not supported
+ */
+#if FLASH_SSD_IS_FLEXNVM_ENABLED
+status_t FLASH_DflashGetProtection(flash_config_t *config, uint8_t *protectStatus);
+#endif
+
+/*!
+ * @brief Set EEPROM Protection to the intended protection status.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param protectStatus The expected protect status user wants to set to EEPROM protection register. Each bit is
+ * corresponding to protection of 1/8 of the total EEPROM. The least significant bit is corresponding to the lowest
+ * address area of EEPROM. The most significant bit is corresponding to the highest address area of EEPROM, and so on.
+ * There are two possible cases as shown below:
+ * 0: this area is protected.
+ * 1: this area is unprotected.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_CommandNotSupported Flash api is not supported
+ * @retval #kStatus_FLASH_CommandFailure Run-time error during command execution.
+ */
+#if FLASH_SSD_IS_FLEXNVM_ENABLED
+status_t FLASH_EepromSetProtection(flash_config_t *config, uint8_t protectStatus);
+#endif
+
+/*!
+ * @brief Get DFLASH Protection Status.
+ *
+ * @param config Pointer to storage for the driver runtime state.
+ * @param protectStatus DFlash Protect status returned by PFlash IP. Each bit is corresponding to protection of 1/8 of
+ * the total EEPROM. The least significant bit is corresponding to the lowest address area of EEPROM. The most
+ * significant bit is corresponding to the highest address area of EEPROM. There are two possible cases as below:
+ * 0: this area is protected.
+ * 1: this area is unprotected.
+ *
+ * @retval #kStatus_FLASH_Success Api was executed successfully.
+ * @retval #kStatus_FLASH_InvalidArgument Invalid argument is provided.
+ * @retval #kStatus_FLASH_CommandNotSupported Flash api is not supported.
+ */
+#if FLASH_SSD_IS_FLEXNVM_ENABLED
+status_t FLASH_EepromGetProtection(flash_config_t *config, uint8_t *protectStatus);
+#endif
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+
+#endif /* _FSL_FLASH_H_ */