added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL26Z/PeripheralNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL26Z/PeripheralNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL26Z/PeripheralNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,95 +1,95 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_PERIPHERALNAMES_H -#define MBED_PERIPHERALNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef enum { - OSC32KCLK = 0, - RTC_CLKIN = 2 -} RTCName; - -typedef enum { - UART_0 = (int)UART0_BASE, - UART_1 = (int)UART1_BASE, - UART_2 = (int)UART2_BASE -} UARTName; -#define STDIO_UART_TX USBTX -#define STDIO_UART_RX USBRX -#define STDIO_UART UART_0 - -typedef enum { - I2C_0 = (int)I2C0_BASE, - I2C_1 = (int)I2C1_BASE, -} I2CName; - -#define TPM_SHIFT 8 -typedef enum { - PWM_1 = (0 << TPM_SHIFT) | (0), // TPM0 CH0 - PWM_2 = (0 << TPM_SHIFT) | (1), // TPM0 CH1 - PWM_3 = (0 << TPM_SHIFT) | (2), // TPM0 CH2 - PWM_4 = (0 << TPM_SHIFT) | (3), // TPM0 CH3 - PWM_5 = (0 << TPM_SHIFT) | (4), // TPM0 CH4 - PWM_6 = (0 << TPM_SHIFT) | (5), // TPM0 CH5 - - PWM_7 = (1 << TPM_SHIFT) | (0), // TPM1 CH0 - PWM_8 = (1 << TPM_SHIFT) | (1), // TPM1 CH1 - - PWM_9 = (2 << TPM_SHIFT) | (0), // TPM2 CH0 - PWM_10 = (2 << TPM_SHIFT) | (1) // TPM2 CH1 -} PWMName; - -#define CHANNELS_A_SHIFT 5 -typedef enum { - ADC0_SE0 = 0, - ADC0_SE3 = 3, - ADC0_SE4a = (1 << CHANNELS_A_SHIFT) | (4), - ADC0_SE4b = 4, - ADC0_SE5b = 5, - ADC0_SE6b = 6, - ADC0_SE7a = (1 << CHANNELS_A_SHIFT) | (7), - ADC0_SE7b = 7, - ADC0_SE8 = 8, - ADC0_SE9 = 9, - ADC0_SE11 = 11, - ADC0_SE12 = 12, - ADC0_SE13 = 13, - ADC0_SE14 = 14, - ADC0_SE15 = 15, - ADC0_SE23 = 23 -} ADCName; - -typedef enum { - DAC_0 = 0 -} DACName; - - -typedef enum { - SPI_0 = (int)SPI0_BASE, - SPI_1 = (int)SPI1_BASE, -} SPIName; - - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + OSC32KCLK = 0, + RTC_CLKIN = 2 +} RTCName; + +typedef enum { + UART_0 = (int)UART0_BASE, + UART_1 = (int)UART1_BASE, + UART_2 = (int)UART2_BASE +} UARTName; +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX +#define STDIO_UART UART_0 + +typedef enum { + I2C_0 = (int)I2C0_BASE, + I2C_1 = (int)I2C1_BASE, +} I2CName; + +#define TPM_SHIFT 8 +typedef enum { + PWM_1 = (0 << TPM_SHIFT) | (0), // TPM0 CH0 + PWM_2 = (0 << TPM_SHIFT) | (1), // TPM0 CH1 + PWM_3 = (0 << TPM_SHIFT) | (2), // TPM0 CH2 + PWM_4 = (0 << TPM_SHIFT) | (3), // TPM0 CH3 + PWM_5 = (0 << TPM_SHIFT) | (4), // TPM0 CH4 + PWM_6 = (0 << TPM_SHIFT) | (5), // TPM0 CH5 + + PWM_7 = (1 << TPM_SHIFT) | (0), // TPM1 CH0 + PWM_8 = (1 << TPM_SHIFT) | (1), // TPM1 CH1 + + PWM_9 = (2 << TPM_SHIFT) | (0), // TPM2 CH0 + PWM_10 = (2 << TPM_SHIFT) | (1) // TPM2 CH1 +} PWMName; + +#define CHANNELS_A_SHIFT 5 +typedef enum { + ADC0_SE0 = 0, + ADC0_SE3 = 3, + ADC0_SE4a = (1 << CHANNELS_A_SHIFT) | (4), + ADC0_SE4b = 4, + ADC0_SE5b = 5, + ADC0_SE6b = 6, + ADC0_SE7a = (1 << CHANNELS_A_SHIFT) | (7), + ADC0_SE7b = 7, + ADC0_SE8 = 8, + ADC0_SE9 = 9, + ADC0_SE11 = 11, + ADC0_SE12 = 12, + ADC0_SE13 = 13, + ADC0_SE14 = 14, + ADC0_SE15 = 15, + ADC0_SE23 = 23 +} ADCName; + +typedef enum { + DAC_0 = 0 +} DACName; + + +typedef enum { + SPI_0 = (int)SPI0_BASE, + SPI_1 = (int)SPI1_BASE, +} SPIName; + + +#ifdef __cplusplus +} +#endif + +#endif