added prescaler for 16 bit pwm in LPC1347 target
Fork of mbed-dev by
Diff: targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/gpio_irq_api.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/gpio_irq_api.c Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/gpio_irq_api.c Fri Sep 02 15:07:44 2016 +0100 @@ -1,170 +1,170 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include <stddef.h> -#include "cmsis.h" - -#include "gpio_irq_api.h" -#include "gpio_api.h" -#include "mbed_error.h" - -#define CHANNEL_NUM 64 - -static uint32_t channel_ids[CHANNEL_NUM] = {0}; -static gpio_irq_handler irq_handler; - -#define IRQ_DISABLED (0) -#define IRQ_RAISING_EDGE PORT_PCR_IRQC(9) -#define IRQ_FALLING_EDGE PORT_PCR_IRQC(10) -#define IRQ_EITHER_EDGE PORT_PCR_IRQC(11) - -const uint32_t search_bits[] = {0x0000FFFF, 0x000000FF, 0x0000000F, 0x00000003, 0x00000001}; - -static void handle_interrupt_in(PORT_Type *port, int ch_base) { - uint32_t isfr; - uint8_t location; - - while((isfr = port->ISFR) != 0) { - location = 0; - for (int i = 0; i < 5; i++) { - if (!(isfr & (search_bits[i] << location))) - location += 1 << (4 - i); - } - - uint32_t id = channel_ids[ch_base + location]; - if (id == 0) { - continue; - } - - FGPIO_Type *gpio; - gpio_irq_event event = IRQ_NONE; - switch (port->PCR[location] & PORT_PCR_IRQC_MASK) { - case IRQ_RAISING_EDGE: - event = IRQ_RISE; - break; - - case IRQ_FALLING_EDGE: - event = IRQ_FALL; - break; - - case IRQ_EITHER_EDGE: - gpio = (port == PORTA) ? (FPTA) : (FPTD); - event = (gpio->PDIR & (1 << location)) ? (IRQ_RISE) : (IRQ_FALL); - break; - } - if (event != IRQ_NONE) { - irq_handler(id, event); - } - port->ISFR = 1 << location; - } -} - -void gpio_irqA(void) {handle_interrupt_in(PORTA, 0);} -void gpio_irqD(void) {handle_interrupt_in(PORTD, 32);} - -int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { - if (pin == NC) return -1; - - irq_handler = handler; - - obj->port = pin >> PORT_SHIFT; - obj->pin = (pin & 0x7F) >> 2; - - uint32_t ch_base, vector; - IRQn_Type irq_n; - switch (obj->port) { - case PortA: - ch_base = 0; irq_n = PORTA_IRQn; vector = (uint32_t)gpio_irqA; - break; - - case PortD: - ch_base = 32; irq_n = PORTD_IRQn; vector = (uint32_t)gpio_irqD; - break; - - default: - error("gpio_irq only supported on port A and D"); - break; - } - NVIC_SetVector(irq_n, vector); - NVIC_EnableIRQ(irq_n); - - obj->ch = ch_base + obj->pin; - channel_ids[obj->ch] = id; - - return 0; -} - -void gpio_irq_free(gpio_irq_t *obj) { - channel_ids[obj->ch] = 0; -} - -void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { - PORT_Type *port = (PORT_Type *)(PORTA_BASE + 0x1000 * obj->port); - - uint32_t irq_settings = IRQ_DISABLED; - - switch (port->PCR[obj->pin] & PORT_PCR_IRQC_MASK) { - case IRQ_DISABLED: - if (enable) { - irq_settings = (event == IRQ_RISE) ? (IRQ_RAISING_EDGE) : (IRQ_FALLING_EDGE); - } - break; - - case IRQ_RAISING_EDGE: - if (enable) { - irq_settings = (event == IRQ_RISE) ? (IRQ_RAISING_EDGE) : (IRQ_EITHER_EDGE); - } else { - if (event == IRQ_FALL) - irq_settings = IRQ_RAISING_EDGE; - } - break; - - case IRQ_FALLING_EDGE: - if (enable) { - irq_settings = (event == IRQ_FALL) ? (IRQ_FALLING_EDGE) : (IRQ_EITHER_EDGE); - } else { - if (event == IRQ_RISE) - irq_settings = IRQ_FALLING_EDGE; - } - break; - - case IRQ_EITHER_EDGE: - if (enable) { - irq_settings = IRQ_EITHER_EDGE; - } else { - irq_settings = (event == IRQ_RISE) ? (IRQ_FALLING_EDGE) : (IRQ_RAISING_EDGE); - } - break; - } - - // Interrupt configuration and clear interrupt - port->PCR[obj->pin] = (port->PCR[obj->pin] & ~PORT_PCR_IRQC_MASK) | irq_settings | PORT_PCR_ISF_MASK; -} - -void gpio_irq_enable(gpio_irq_t *obj) { - if (obj->port == PortA) { - NVIC_EnableIRQ(PORTA_IRQn); - } else if (obj->port == PortD) { - NVIC_EnableIRQ(PORTD_IRQn); - } -} - -void gpio_irq_disable(gpio_irq_t *obj) { - if (obj->port == PortA) { - NVIC_DisableIRQ(PORTA_IRQn); - } else if (obj->port == PortD) { - NVIC_DisableIRQ(PORTD_IRQn); - } -} +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stddef.h> +#include "cmsis.h" + +#include "gpio_irq_api.h" +#include "gpio_api.h" +#include "mbed_error.h" + +#define CHANNEL_NUM 64 + +static uint32_t channel_ids[CHANNEL_NUM] = {0}; +static gpio_irq_handler irq_handler; + +#define IRQ_DISABLED (0) +#define IRQ_RAISING_EDGE PORT_PCR_IRQC(9) +#define IRQ_FALLING_EDGE PORT_PCR_IRQC(10) +#define IRQ_EITHER_EDGE PORT_PCR_IRQC(11) + +const uint32_t search_bits[] = {0x0000FFFF, 0x000000FF, 0x0000000F, 0x00000003, 0x00000001}; + +static void handle_interrupt_in(PORT_Type *port, int ch_base) { + uint32_t isfr; + uint8_t location; + + while((isfr = port->ISFR) != 0) { + location = 0; + for (int i = 0; i < 5; i++) { + if (!(isfr & (search_bits[i] << location))) + location += 1 << (4 - i); + } + + uint32_t id = channel_ids[ch_base + location]; + if (id == 0) { + continue; + } + + FGPIO_Type *gpio; + gpio_irq_event event = IRQ_NONE; + switch (port->PCR[location] & PORT_PCR_IRQC_MASK) { + case IRQ_RAISING_EDGE: + event = IRQ_RISE; + break; + + case IRQ_FALLING_EDGE: + event = IRQ_FALL; + break; + + case IRQ_EITHER_EDGE: + gpio = (port == PORTA) ? (FPTA) : (FPTD); + event = (gpio->PDIR & (1 << location)) ? (IRQ_RISE) : (IRQ_FALL); + break; + } + if (event != IRQ_NONE) { + irq_handler(id, event); + } + port->ISFR = 1 << location; + } +} + +void gpio_irqA(void) {handle_interrupt_in(PORTA, 0);} +void gpio_irqD(void) {handle_interrupt_in(PORTD, 32);} + +int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id) { + if (pin == NC) return -1; + + irq_handler = handler; + + obj->port = pin >> PORT_SHIFT; + obj->pin = (pin & 0x7F) >> 2; + + uint32_t ch_base, vector; + IRQn_Type irq_n; + switch (obj->port) { + case PortA: + ch_base = 0; irq_n = PORTA_IRQn; vector = (uint32_t)gpio_irqA; + break; + + case PortD: + ch_base = 32; irq_n = PORTD_IRQn; vector = (uint32_t)gpio_irqD; + break; + + default: + error("gpio_irq only supported on port A and D"); + break; + } + NVIC_SetVector(irq_n, vector); + NVIC_EnableIRQ(irq_n); + + obj->ch = ch_base + obj->pin; + channel_ids[obj->ch] = id; + + return 0; +} + +void gpio_irq_free(gpio_irq_t *obj) { + channel_ids[obj->ch] = 0; +} + +void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable) { + PORT_Type *port = (PORT_Type *)(PORTA_BASE + 0x1000 * obj->port); + + uint32_t irq_settings = IRQ_DISABLED; + + switch (port->PCR[obj->pin] & PORT_PCR_IRQC_MASK) { + case IRQ_DISABLED: + if (enable) { + irq_settings = (event == IRQ_RISE) ? (IRQ_RAISING_EDGE) : (IRQ_FALLING_EDGE); + } + break; + + case IRQ_RAISING_EDGE: + if (enable) { + irq_settings = (event == IRQ_RISE) ? (IRQ_RAISING_EDGE) : (IRQ_EITHER_EDGE); + } else { + if (event == IRQ_FALL) + irq_settings = IRQ_RAISING_EDGE; + } + break; + + case IRQ_FALLING_EDGE: + if (enable) { + irq_settings = (event == IRQ_FALL) ? (IRQ_FALLING_EDGE) : (IRQ_EITHER_EDGE); + } else { + if (event == IRQ_RISE) + irq_settings = IRQ_FALLING_EDGE; + } + break; + + case IRQ_EITHER_EDGE: + if (enable) { + irq_settings = IRQ_EITHER_EDGE; + } else { + irq_settings = (event == IRQ_RISE) ? (IRQ_FALLING_EDGE) : (IRQ_RAISING_EDGE); + } + break; + } + + // Interrupt configuration and clear interrupt + port->PCR[obj->pin] = (port->PCR[obj->pin] & ~PORT_PCR_IRQC_MASK) | irq_settings | PORT_PCR_ISF_MASK; +} + +void gpio_irq_enable(gpio_irq_t *obj) { + if (obj->port == PortA) { + NVIC_EnableIRQ(PORTA_IRQn); + } else if (obj->port == PortD) { + NVIC_EnableIRQ(PORTD_IRQn); + } +} + +void gpio_irq_disable(gpio_irq_t *obj) { + if (obj->port == PortA) { + NVIC_DisableIRQ(PORTA_IRQn); + } else if (obj->port == PortD) { + NVIC_DisableIRQ(PORTD_IRQn); + } +}