added prescaler for 16 bit pwm in LPC1347 target

Fork of mbed-dev by mbed official

Revision:
144:ef7eb2e8f9f7
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_ONSEMI/TARGET_NCS36510/NCS36510.h	Fri Sep 02 15:07:44 2016 +0100
@@ -0,0 +1,92 @@
+/**************************************************************************/
+/**
+ * @file     ARMCM3.h
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ *           for CM3 Device Series
+ * @version  V1.05
+ * @date     26. July 2011
+ *
+ * @note
+ * Copyright (C) 2010-2011 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers.  This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef ARMCM3_H
+#define ARMCM3_H
+
+/**
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+typedef enum IRQn
+{
+	/******  Cortex-M3 Processor Exceptions Numbers ***************************************************/
+	NonMaskableInt_IRQn 	= -14, 		/*!<  2 Cortex-M3 Non Maskable Interrupt                  */
+	HardFault_IRQn 			= -13, 		/*!<  3 Cortex-M3 Hard Fault Interrupt                    */
+	MemoryManagement_IRQn 	= -12, 		/*!<  4 Cortex-M3 Memory Management Interrupt             */
+	BusFault_IRQn 			= -11,		/*!<  5 Cortex-M3 Bus Fault Interrupt                     */
+	UsageFault_IRQn 		= -10, 		/*!<  6 Cortex-M3 Usage Fault Interrupt                   */
+	SVCall_IRQn 			= -5, 		/*!< 11 Cortex-M3 SV Call Interrupt                       */
+	DebugMonitor_IRQn 		= -4, 		/*!< 12 Cortex-M3 Debug Monitor Interrupt                 */
+	PendSV_IRQn 			= -2, 		/*!< 14 Cortex-M3 Pend SV Interrupt                       */
+	SysTick_IRQn			= -1, 		/*!< 15 Cortex-M3 System Tick Interrupt                   */
+
+	/******  ARMCM3 specific Interrupt Numbers ********************************************************/
+	Tim0_IRQn 				= 0,
+	Tim1_IRQn 				= 1,
+	Tim2_IRQn 				= 2,
+	Uart1_IRQn 				= 3,
+	Spi_IRQn 				= 4,
+	I2C_IRQn 				= 5,
+	Gpio_IRQn 				= 6,
+	Rtc_IRQn 				= 7,
+	Flash_IRQn 				= 8,
+	MacHw_IRQn 				= 9,
+	Aes_IRQn 				= 10,
+	Adc_IRQn 				= 11,
+	ClockCal_IRQn 			= 12,
+	Uart2_IRQn 				= 13,
+	Uvi_IRQn				= 14,
+	Dma_IRQn 				= 15,
+	DbgPwrUp_IRQn 			= 16,
+	Spi2_IRQn 				= 17,
+	I2C2_IRQn 				= 18,
+	FVDDHComp_IRQn			= 19
+} IRQn_Type;
+
+/**
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/** Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __CM3_REV                 0x0201    /*!< Core Revision r2p1                               */
+#define __MPU_PRESENT             1         /*!< MPU present or not                               */
+#define __NVIC_PRIO_BITS          4         /*!< Number of Bits used for Priority Levels          */
+#define __Vendor_SysTickConfig    0         /*!< Set to 1 if different SysTick Config is used     */
+
+//#define YOTTA_CFG_CMSIS_NVIC_USER_IRQ_OFFSET	16
+//#define YOTTA_CFG_CMSIS_NVIC_USER_IRQ_NUMBER	20
+//#define NVIC_NUM_VECTORS     (NVIC_USER_IRQ_OFFSET + NVIC_USER_IRQ_NUMBER)
+
+//#define YOTTA_CFG_CMSIS_NVIC_RAM_VECTOR_ADDRESS
+//#define YOTTA_CFG_CMSIS_NVIC_FLASH_VECTOR_ADDRESS	0x3000
+
+#include <core_cm3.h>                       /* Cortex-M3 processor and core peripherals           */
+#include "system_NCS36510.h"                  /* System Header                                      */
+
+#endif  /* ARMCM3_H */