mbed-dev - added prescaler for 16 bit pwm in LPC1347 target

Users » JojoS » Code » mbed-dev
added prescaler for 16 bit pwm in LPC1347 target
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/serial_api.c

Revision:: 52:4ce9155acc4d
Parent:: 50:a417edff4437
Child:: 144:ef7eb2e8f9f7
--- a/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/serial_api.c	Fri Jan 15 08:00:11 2016 +0000
+++ b/targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/serial_api.c	Fri Jan 15 13:15:11 2016 +0000
@@ -83,6 +83,7 @@
 static uint8_t serial_get_index(serial_t *obj);
 static void serial_enable(serial_t *obj, uint8_t enable);
 static void serial_enable_pins(serial_t *obj, uint8_t enable);
+static void serial_set_route(serial_t *obj);
 static IRQn_Type serial_get_rx_irq_index(serial_t *obj);
 static IRQn_Type serial_get_tx_irq_index(serial_t *obj);
 static CMU_Clock_TypeDef serial_get_clock(serial_t *obj);
@@ -482,7 +483,7 @@
         }
         /* Set DOUT first to prevent glitches */
         if(obj->serial.tx_pin != NC) {
-			GPIO_PinOutSet((GPIO_Port_TypeDef)(obj->serial.tx_pin >> 4 & 0xF), obj->serial.tx_pin & 0xF);
+            GPIO_PinOutSet((GPIO_Port_TypeDef)(obj->serial.tx_pin >> 4 & 0xF), obj->serial.tx_pin & 0xF);
             pin_mode(obj->serial.tx_pin, PushPull);
         }
     } else {
@@ -495,6 +496,69 @@
     }
 }
 
+static void serial_set_route(serial_t *obj)
+{
+    /* Enable pins for UART at correct location */
+    if(LEUART_REF_VALID(obj->serial.periph.leuart)) {
+#ifdef _LEUART_ROUTE_LOCATION_SHIFT
+        obj->serial.periph.leuart->ROUTE = (obj->serial.location << _LEUART_ROUTE_LOCATION_SHIFT);
+        if(obj->serial.tx_pin != (uint32_t)NC) {
+            obj->serial.periph.leuart->ROUTE |= LEUART_ROUTE_TXPEN;
+        } else {
+            obj->serial.periph.leuart->ROUTE &= ~LEUART_ROUTE_TXPEN;
+        }
+        if(obj->serial.rx_pin != (uint32_t)NC) {
+            obj->serial.periph.leuart->ROUTE |= LEUART_ROUTE_RXPEN;
+        } else {
+            obj->serial.periph.leuart->CMD    = LEUART_CMD_RXBLOCKEN;
+            obj->serial.periph.leuart->ROUTE &= ~LEUART_ROUTE_RXPEN;
+        }
+#else
+        if(obj->serial.location_tx != NC) {
+            obj->serial.periph.leuart->ROUTELOC0 = (obj->serial.periph.leuart->ROUTELOC0 & (~_LEUART_ROUTELOC0_TXLOC_MASK)) | (obj->serial.location_tx << _LEUART_ROUTELOC0_TXLOC_SHIFT);
+            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_TXPEN_MASK)) | LEUART_ROUTEPEN_TXPEN;
+        } else {
+            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_TXPEN_MASK));
+        }
+        if(obj->serial.location_rx != NC) {
+            obj->serial.periph.leuart->ROUTELOC0 = (obj->serial.periph.leuart->ROUTELOC0 & (~_LEUART_ROUTELOC0_RXLOC_MASK)) | (obj->serial.location_rx << _LEUART_ROUTELOC0_RXLOC_SHIFT);
+            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_RXPEN_MASK)) | LEUART_ROUTEPEN_RXPEN;
+        } else {
+            obj->serial.periph.leuart->CMD       = LEUART_CMD_RXBLOCKEN;
+            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_RXPEN_MASK));
+        }
+#endif
+    } else {
+#ifdef _USART_ROUTE_LOCATION_SHIFT
+        obj->serial.periph.uart->ROUTE = (obj->serial.location << _LEUART_ROUTE_LOCATION_SHIFT);
+        if(obj->serial.tx_pin != (uint32_t)NC) {
+            obj->serial.periph.uart->ROUTE |= USART_ROUTE_TXPEN;
+        } else {
+            obj->serial.periph.uart->ROUTE &= ~USART_ROUTE_TXPEN;
+        }
+        if(obj->serial.rx_pin != (uint32_t)NC) {
+            obj->serial.periph.uart->ROUTE |= USART_ROUTE_RXPEN;
+        } else {
+            obj->serial.periph.uart->CMD    = USART_CMD_RXBLOCKEN;
+            obj->serial.periph.uart->ROUTE &= ~USART_ROUTE_RXPEN;
+        }
+#else
+        if(obj->serial.location_tx != NC) {
+            obj->serial.periph.uart->ROUTELOC0 = (obj->serial.periph.uart->ROUTELOC0 & (~_USART_ROUTELOC0_TXLOC_MASK)) | (obj->serial.location_tx << _USART_ROUTELOC0_TXLOC_SHIFT);
+            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_TXPEN_MASK)) | USART_ROUTEPEN_TXPEN;
+        } else {
+            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_TXPEN_MASK));
+        }
+        if(obj->serial.location_rx != NC) {
+            obj->serial.periph.uart->ROUTELOC0 = (obj->serial.periph.uart->ROUTELOC0 & (~_USART_ROUTELOC0_RXLOC_MASK)) | (obj->serial.location_rx << _USART_ROUTELOC0_RXLOC_SHIFT);
+            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_RXPEN_MASK)) | USART_ROUTEPEN_RXPEN;
+        } else {
+            obj->serial.periph.uart->CMD       = USART_CMD_RXBLOCKEN;
+            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_RXPEN_MASK));
+        }
+#endif
+    }
+}
 
 void serial_init(serial_t *obj, PinName tx, PinName rx)
 {
@@ -535,56 +599,13 @@
     uart_init(obj, baudrate, ParityNone, 1);
 
     /* Enable pins for UART at correct location */
+    serial_set_route(obj);
+
+    /* Reset interrupts */
     if(LEUART_REF_VALID(obj->serial.periph.leuart)) {
-#ifdef _LEUART_ROUTE_LOCATION_SHIFT
-        obj->serial.periph.leuart->ROUTE = (obj->serial.location << _LEUART_ROUTE_LOCATION_SHIFT);
-        if(tx != (uint32_t)NC) {
-            obj->serial.periph.leuart->ROUTE |= LEUART_ROUTE_TXPEN;
-        }
-        if(rx != (uint32_t)NC) {
-            obj->serial.periph.leuart->ROUTE |= LEUART_ROUTE_RXPEN;
-        }
-#else
-        if(obj->serial.location_tx != NC) {
-            obj->serial.periph.leuart->ROUTELOC0 = (obj->serial.periph.leuart->ROUTELOC0 & (~_LEUART_ROUTELOC0_TXLOC_MASK)) | (obj->serial.location_tx << _LEUART_ROUTELOC0_TXLOC_SHIFT);
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_TXPEN_MASK)) | LEUART_ROUTEPEN_TXPEN;
-        } else {
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_TXPEN_MASK));
-        }
-        if(obj->serial.location_rx != NC) {
-            obj->serial.periph.leuart->ROUTELOC0 = (obj->serial.periph.leuart->ROUTELOC0 & (~_LEUART_ROUTELOC0_RXLOC_MASK)) | (obj->serial.location_rx << _LEUART_ROUTELOC0_RXLOC_SHIFT);
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_RXPEN_MASK)) | LEUART_ROUTEPEN_RXPEN;
-        } else {
-            obj->serial.periph.leuart->CMD       = LEUART_CMD_RXBLOCKEN;
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_RXPEN_MASK));
-        }
-#endif
         obj->serial.periph.leuart->IFC = LEUART_IFC_TXC;
         obj->serial.periph.leuart->CTRL |= LEUART_CTRL_RXDMAWU | LEUART_CTRL_TXDMAWU;
     } else {
-#ifdef _USART_ROUTE_LOCATION_SHIFT
-        obj->serial.periph.uart->ROUTE = (obj->serial.location << _USART_ROUTE_LOCATION_SHIFT);
-        if(tx != (uint32_t)NC) {
-            obj->serial.periph.uart->ROUTE |= USART_ROUTE_TXPEN;
-        }
-        if(rx != (uint32_t)NC) {
-            obj->serial.periph.uart->ROUTE |= USART_ROUTE_RXPEN;
-        }
-#else
-        if(obj->serial.location_tx != NC) {
-            obj->serial.periph.uart->ROUTELOC0 = (obj->serial.periph.uart->ROUTELOC0 & (~_USART_ROUTELOC0_TXLOC_MASK)) | (obj->serial.location_tx << _USART_ROUTELOC0_TXLOC_SHIFT);
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_TXPEN_MASK)) | USART_ROUTEPEN_TXPEN;
-        } else {
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_TXPEN_MASK));
-        }
-        if(obj->serial.location_rx != NC) {
-            obj->serial.periph.uart->ROUTELOC0 = (obj->serial.periph.uart->ROUTELOC0 & (~_USART_ROUTELOC0_RXLOC_MASK)) | (obj->serial.location_rx << _USART_ROUTELOC0_RXLOC_SHIFT);
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_RXPEN_MASK)) | USART_ROUTEPEN_RXPEN;
-        } else {
-            obj->serial.periph.uart->CMD       = USART_CMD_RXBLOCKEN;
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_RXPEN_MASK));
-        }
-#endif
         obj->serial.periph.uart->IFC = USART_IFC_TXC;
     }
 
@@ -761,28 +782,7 @@
         LEUART_Init(obj->serial.periph.leuart, &init);
 
         /* Re-enable pins for UART at correct location */
-#ifdef _LEUART_ROUTE_LOCATION_SHIFT
-        obj->serial.periph.leuart->ROUTE = (obj->serial.location << _LEUART_ROUTE_LOCATION_SHIFT);
-        if(obj->serial.tx_pin != (uint32_t)NC) {
-            obj->serial.periph.leuart->ROUTE |= LEUART_ROUTE_TXPEN;
-        }
-        if(obj->serial.rx_pin != (uint32_t)NC) {
-            obj->serial.periph.leuart->ROUTE |= LEUART_ROUTE_RXPEN;
-        }
-#else
-        if(obj->serial.location_tx != NC) {
-            obj->serial.periph.leuart->ROUTELOC0 = (obj->serial.periph.leuart->ROUTELOC0 & (~_LEUART_ROUTELOC0_TXLOC_MASK)) | (obj->serial.location_tx << _LEUART_ROUTELOC0_TXLOC_SHIFT);
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_TXPEN_MASK)) | LEUART_ROUTEPEN_TXPEN;
-        } else {
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_TXPEN_MASK));
-        }
-        if(obj->serial.location_rx != NC) {
-            obj->serial.periph.leuart->ROUTELOC0 = (obj->serial.periph.leuart->ROUTELOC0 & (~_LEUART_ROUTELOC0_RXLOC_MASK)) | (obj->serial.location_rx << _LEUART_ROUTELOC0_RXLOC_SHIFT);
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_RXPEN_MASK)) | LEUART_ROUTEPEN_RXPEN;
-        } else {
-            obj->serial.periph.leuart->ROUTEPEN  = (obj->serial.periph.leuart->ROUTEPEN & (~_LEUART_ROUTEPEN_RXPEN_MASK));
-        }
-#endif
+        serial_set_route(obj);
 
         /* Re-enable interrupts */
         if(was_enabled != 0) {
@@ -827,28 +827,7 @@
         USART_InitAsync(obj->serial.periph.uart, &init);
 
         /* Re-enable pins for UART at correct location */
-#ifdef _USART_ROUTE_LOCATION_SHIFT
-        obj->serial.periph.uart->ROUTE = (obj->serial.location << _USART_ROUTE_LOCATION_SHIFT);
-        if(obj->serial.tx_pin != (uint32_t)NC) {
-            obj->serial.periph.uart->ROUTE |= USART_ROUTE_TXPEN;
-        }
-        if(obj->serial.rx_pin != (uint32_t)NC) {
-            obj->serial.periph.uart->ROUTE |= USART_ROUTE_RXPEN;
-        }
-#else
-        if(obj->serial.location_tx != NC) {
-            obj->serial.periph.uart->ROUTELOC0 = (obj->serial.periph.uart->ROUTELOC0 & (~_USART_ROUTELOC0_TXLOC_MASK)) | (obj->serial.location_tx << _USART_ROUTELOC0_TXLOC_SHIFT);
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_TXPEN_MASK)) | USART_ROUTEPEN_TXPEN;
-        } else {
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_TXPEN_MASK));
-        }
-        if(obj->serial.location_rx != NC) {
-            obj->serial.periph.uart->ROUTELOC0 = (obj->serial.periph.uart->ROUTELOC0 & (~_USART_ROUTELOC0_RXLOC_MASK)) | (obj->serial.location_rx << _USART_ROUTELOC0_RXLOC_SHIFT);
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_RXPEN_MASK)) | USART_ROUTEPEN_RXPEN;
-        } else {
-            obj->serial.periph.uart->ROUTEPEN  = (obj->serial.periph.uart->ROUTEPEN & (~_USART_ROUTEPEN_RXPEN_MASK));
-        }
-#endif
+        serial_set_route(obj);
 
         /* Re-enable interrupts */
         if(was_enabled != 0) {
Repository toolbox

Export to desktop IDE
Repository details

Type:	Library
Created:	10 Sep 2016
Imports:	1
Forks:	0
Commits:	148
Dependents:	0
Dependencies:	0
Followers:	1
Diff: targets/hal/TARGET_Silicon_Labs/TARGET_EFM32/serial_api.c

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning
