added prescaler for 16 bit pwm in LPC1347 target

Fork of mbed-dev by mbed official

Committer:
<>
Date:
Fri Sep 02 15:07:44 2016 +0100
Revision:
144:ef7eb2e8f9f7
Parent:
0:9b334a45a8ff
This updates the lib to the mbed lib v125

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 *******************************************************************************
<> 144:ef7eb2e8f9f7 3 * Copyright (c) 2014, STMicroelectronics
<> 144:ef7eb2e8f9f7 4 * All rights reserved.
<> 144:ef7eb2e8f9f7 5 *
<> 144:ef7eb2e8f9f7 6 * Redistribution and use in source and binary forms, with or without
<> 144:ef7eb2e8f9f7 7 * modification, are permitted provided that the following conditions are met:
<> 144:ef7eb2e8f9f7 8 *
<> 144:ef7eb2e8f9f7 9 * 1. Redistributions of source code must retain the above copyright notice,
<> 144:ef7eb2e8f9f7 10 * this list of conditions and the following disclaimer.
<> 144:ef7eb2e8f9f7 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 144:ef7eb2e8f9f7 12 * this list of conditions and the following disclaimer in the documentation
<> 144:ef7eb2e8f9f7 13 * and/or other materials provided with the distribution.
<> 144:ef7eb2e8f9f7 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 144:ef7eb2e8f9f7 15 * may be used to endorse or promote products derived from this software
<> 144:ef7eb2e8f9f7 16 * without specific prior written permission.
<> 144:ef7eb2e8f9f7 17 *
<> 144:ef7eb2e8f9f7 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 144:ef7eb2e8f9f7 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 144:ef7eb2e8f9f7 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 144:ef7eb2e8f9f7 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 144:ef7eb2e8f9f7 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 144:ef7eb2e8f9f7 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 144:ef7eb2e8f9f7 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 144:ef7eb2e8f9f7 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 144:ef7eb2e8f9f7 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 144:ef7eb2e8f9f7 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 144:ef7eb2e8f9f7 28 *******************************************************************************
<> 144:ef7eb2e8f9f7 29 */
<> 144:ef7eb2e8f9f7 30 #include "mbed_assert.h"
<> 144:ef7eb2e8f9f7 31 #include "pinmap.h"
<> 144:ef7eb2e8f9f7 32 #include "PortNames.h"
<> 144:ef7eb2e8f9f7 33 #include "mbed_error.h"
<> 144:ef7eb2e8f9f7 34
<> 144:ef7eb2e8f9f7 35 // GPIO mode look-up table
<> 144:ef7eb2e8f9f7 36 // Warning: the elements order must be the same as the one defined in PinNames.h
<> 144:ef7eb2e8f9f7 37 static const uint32_t gpio_mode[13] = {
<> 144:ef7eb2e8f9f7 38 GPIO_MODE_INPUT, // 0 = STM_MODE_INPUT
<> 144:ef7eb2e8f9f7 39 GPIO_MODE_OUTPUT_PP, // 1 = STM_MODE_OUTPUT_PP
<> 144:ef7eb2e8f9f7 40 GPIO_MODE_OUTPUT_OD, // 2 = STM_MODE_OUTPUT_OD
<> 144:ef7eb2e8f9f7 41 GPIO_MODE_AF_PP, // 3 = STM_MODE_AF_PP
<> 144:ef7eb2e8f9f7 42 GPIO_MODE_AF_OD, // 4 = STM_MODE_AF_OD
<> 144:ef7eb2e8f9f7 43 GPIO_MODE_ANALOG, // 5 = STM_MODE_ANALOG
<> 144:ef7eb2e8f9f7 44 GPIO_MODE_IT_RISING, // 6 = STM_MODE_IT_RISING
<> 144:ef7eb2e8f9f7 45 GPIO_MODE_IT_FALLING, // 7 = STM_MODE_IT_FALLING
<> 144:ef7eb2e8f9f7 46 GPIO_MODE_IT_RISING_FALLING, // 8 = STM_MODE_IT_RISING_FALLING
<> 144:ef7eb2e8f9f7 47 GPIO_MODE_EVT_RISING, // 9 = STM_MODE_EVT_RISING
<> 144:ef7eb2e8f9f7 48 GPIO_MODE_EVT_FALLING, // 10 = STM_MODE_EVT_FALLING
<> 144:ef7eb2e8f9f7 49 GPIO_MODE_EVT_RISING_FALLING, // 11 = STM_MODE_EVT_RISING_FALLING
<> 144:ef7eb2e8f9f7 50 0x10000000 // 12 = STM_MODE_IT_EVT_RESET (not in STM32Cube HAL)
<> 144:ef7eb2e8f9f7 51 };
<> 144:ef7eb2e8f9f7 52
<> 144:ef7eb2e8f9f7 53 // Enable GPIO clock and return GPIO base address
<> 144:ef7eb2e8f9f7 54 uint32_t Set_GPIO_Clock(uint32_t port_idx)
<> 144:ef7eb2e8f9f7 55 {
<> 144:ef7eb2e8f9f7 56 uint32_t gpio_add = 0;
<> 144:ef7eb2e8f9f7 57 switch (port_idx) {
<> 144:ef7eb2e8f9f7 58 case PortA:
<> 144:ef7eb2e8f9f7 59 gpio_add = GPIOA_BASE;
<> 144:ef7eb2e8f9f7 60 __GPIOA_CLK_ENABLE();
<> 144:ef7eb2e8f9f7 61 break;
<> 144:ef7eb2e8f9f7 62 case PortB:
<> 144:ef7eb2e8f9f7 63 gpio_add = GPIOB_BASE;
<> 144:ef7eb2e8f9f7 64 __GPIOB_CLK_ENABLE();
<> 144:ef7eb2e8f9f7 65 break;
<> 144:ef7eb2e8f9f7 66 case PortC:
<> 144:ef7eb2e8f9f7 67 gpio_add = GPIOC_BASE;
<> 144:ef7eb2e8f9f7 68 __GPIOC_CLK_ENABLE();
<> 144:ef7eb2e8f9f7 69 break;
<> 144:ef7eb2e8f9f7 70 case PortD:
<> 144:ef7eb2e8f9f7 71 gpio_add = GPIOD_BASE;
<> 144:ef7eb2e8f9f7 72 __GPIOD_CLK_ENABLE();
<> 144:ef7eb2e8f9f7 73 break;
<> 144:ef7eb2e8f9f7 74 #if defined(GPIOE_BASE)
<> 144:ef7eb2e8f9f7 75 case PortE:
<> 144:ef7eb2e8f9f7 76 gpio_add = GPIOE_BASE;
<> 144:ef7eb2e8f9f7 77 __GPIOE_CLK_ENABLE();
<> 144:ef7eb2e8f9f7 78 break;
<> 144:ef7eb2e8f9f7 79 #endif
<> 144:ef7eb2e8f9f7 80 case PortF:
<> 144:ef7eb2e8f9f7 81 gpio_add = GPIOF_BASE;
<> 144:ef7eb2e8f9f7 82 __GPIOF_CLK_ENABLE();
<> 144:ef7eb2e8f9f7 83 break;
<> 144:ef7eb2e8f9f7 84 default:
<> 144:ef7eb2e8f9f7 85 error("Pinmap error: wrong port number.");
<> 144:ef7eb2e8f9f7 86 break;
<> 144:ef7eb2e8f9f7 87 }
<> 144:ef7eb2e8f9f7 88 return gpio_add;
<> 144:ef7eb2e8f9f7 89 }
<> 144:ef7eb2e8f9f7 90
<> 144:ef7eb2e8f9f7 91 /**
<> 144:ef7eb2e8f9f7 92 * Configure pin (mode, speed, output type and pull-up/pull-down)
<> 144:ef7eb2e8f9f7 93 */
<> 144:ef7eb2e8f9f7 94 void pin_function(PinName pin, int data)
<> 144:ef7eb2e8f9f7 95 {
<> 144:ef7eb2e8f9f7 96 MBED_ASSERT(pin != (PinName)NC);
<> 144:ef7eb2e8f9f7 97 // Get the pin informations
<> 144:ef7eb2e8f9f7 98 uint32_t mode = STM_PIN_MODE(data);
<> 144:ef7eb2e8f9f7 99 uint32_t pupd = STM_PIN_PUPD(data);
<> 144:ef7eb2e8f9f7 100 uint32_t afnum = STM_PIN_AFNUM(data);
<> 144:ef7eb2e8f9f7 101
<> 144:ef7eb2e8f9f7 102 uint32_t port_index = STM_PORT(pin);
<> 144:ef7eb2e8f9f7 103 uint32_t pin_index = STM_PIN(pin);
<> 144:ef7eb2e8f9f7 104
<> 144:ef7eb2e8f9f7 105 // Enable GPIO clock
<> 144:ef7eb2e8f9f7 106 uint32_t gpio_add = Set_GPIO_Clock(port_index);
<> 144:ef7eb2e8f9f7 107 GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
<> 144:ef7eb2e8f9f7 108
<> 144:ef7eb2e8f9f7 109 // Configure GPIO
<> 144:ef7eb2e8f9f7 110 GPIO_InitTypeDef GPIO_InitStructure;
<> 144:ef7eb2e8f9f7 111 GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
<> 144:ef7eb2e8f9f7 112 GPIO_InitStructure.Mode = gpio_mode[mode];
<> 144:ef7eb2e8f9f7 113 GPIO_InitStructure.Pull = pupd;
<> 144:ef7eb2e8f9f7 114 GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
<> 144:ef7eb2e8f9f7 115 GPIO_InitStructure.Alternate = afnum;
<> 144:ef7eb2e8f9f7 116 HAL_GPIO_Init(gpio, &GPIO_InitStructure);
<> 144:ef7eb2e8f9f7 117
<> 144:ef7eb2e8f9f7 118 // [TODO] Disconnect JTAG-DP + SW-DP signals.
<> 144:ef7eb2e8f9f7 119 // Warning: Need to reconnect under reset
<> 144:ef7eb2e8f9f7 120 //if ((pin == PA_13) || (pin == PA_14)) {
<> 144:ef7eb2e8f9f7 121 //
<> 144:ef7eb2e8f9f7 122 //}
<> 144:ef7eb2e8f9f7 123 }
<> 144:ef7eb2e8f9f7 124
<> 144:ef7eb2e8f9f7 125 /**
<> 144:ef7eb2e8f9f7 126 * Configure pin pull-up/pull-down
<> 144:ef7eb2e8f9f7 127 */
<> 144:ef7eb2e8f9f7 128 void pin_mode(PinName pin, PinMode mode)
<> 144:ef7eb2e8f9f7 129 {
<> 144:ef7eb2e8f9f7 130 MBED_ASSERT(pin != (PinName)NC);
<> 144:ef7eb2e8f9f7 131 uint32_t port_index = STM_PORT(pin);
<> 144:ef7eb2e8f9f7 132 uint32_t pin_index = STM_PIN(pin);
<> 144:ef7eb2e8f9f7 133
<> 144:ef7eb2e8f9f7 134 // Enable GPIO clock
<> 144:ef7eb2e8f9f7 135 uint32_t gpio_add = Set_GPIO_Clock(port_index);
<> 144:ef7eb2e8f9f7 136 GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
<> 144:ef7eb2e8f9f7 137
<> 144:ef7eb2e8f9f7 138 // Configure pull-up/pull-down resistors
<> 144:ef7eb2e8f9f7 139 uint32_t pupd = (uint32_t)mode;
<> 144:ef7eb2e8f9f7 140 if (pupd > 2) {
<> 144:ef7eb2e8f9f7 141 pupd = 0; // Open-drain = No pull-up/No pull-down
<> 144:ef7eb2e8f9f7 142 }
<> 144:ef7eb2e8f9f7 143 gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
<> 144:ef7eb2e8f9f7 144 gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
<> 144:ef7eb2e8f9f7 145 }