Johannes Stratmann / mbed-dev

added prescaler for 16 bit pwm in LPC1347 target

Fork of mbed-dev by mbed official

targets/hal/TARGET_NXP/TARGET_LPC43XX/gpio_api.c@147:ba84b7dc41a7, 2016-09-10 (annotated)

Committer:
JojoS
Date:
Sat Sep 10 15:32:04 2016 +0000
Revision:
147:ba84b7dc41a7
Parent:
144:ef7eb2e8f9f7 
added prescaler for 16 bit timers (solution as in LPC11xx), default prescaler 31 for max 28 ms period time

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2006-2013 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 *
<> 144:ef7eb2e8f9f7 16 * Ported to NXP LPC43XX by Micromint USA <support@micromint.com>
<> 144:ef7eb2e8f9f7 17 */
<> 144:ef7eb2e8f9f7 18 #include "mbed_assert.h"
<> 144:ef7eb2e8f9f7 19 #include "gpio_api.h"
<> 144:ef7eb2e8f9f7 20 #include "pinmap.h"
<> 144:ef7eb2e8f9f7 21
<> 144:ef7eb2e8f9f7 22 uint32_t gpio_set(PinName pin) {
<> 144:ef7eb2e8f9f7 23 MBED_ASSERT(pin != (PinName)NC);
<> 144:ef7eb2e8f9f7 24 int f = 0;
<> 144:ef7eb2e8f9f7 25 unsigned int port = (unsigned int)MBED_GPIO_PORT(pin);
<> 144:ef7eb2e8f9f7 26
<> 144:ef7eb2e8f9f7 27 f = SCU_PINIO_FAST | ((port > 4) ? (4) : (0));
<> 144:ef7eb2e8f9f7 28 pin_function(pin, f);
<> 144:ef7eb2e8f9f7 29
<> 144:ef7eb2e8f9f7 30 return (1 << ((int)pin & 0x1F));
<> 144:ef7eb2e8f9f7 31 }
<> 144:ef7eb2e8f9f7 32
<> 144:ef7eb2e8f9f7 33 void gpio_init(gpio_t *obj, PinName pin) {
<> 144:ef7eb2e8f9f7 34 obj->pin = pin;
<> 144:ef7eb2e8f9f7 35 if (pin == (PinName)NC)
<> 144:ef7eb2e8f9f7 36 return;
<> 144:ef7eb2e8f9f7 37
<> 144:ef7eb2e8f9f7 38 obj->mask = gpio_set(pin);
<> 144:ef7eb2e8f9f7 39
<> 144:ef7eb2e8f9f7 40 LPC_GPIO_T *port_reg = (LPC_GPIO_T *)(LPC_GPIO_PORT_BASE);
<> 144:ef7eb2e8f9f7 41 unsigned int port = (unsigned int)MBED_GPIO_PORT(pin);
<> 144:ef7eb2e8f9f7 42
<> 144:ef7eb2e8f9f7 43 obj->reg_set = &port_reg->SET[port];
<> 144:ef7eb2e8f9f7 44 obj->reg_clr = &port_reg->CLR[port];
<> 144:ef7eb2e8f9f7 45 obj->reg_in = &port_reg->PIN[port];
<> 144:ef7eb2e8f9f7 46 obj->reg_dir = &port_reg->DIR[port];
<> 144:ef7eb2e8f9f7 47 }
<> 144:ef7eb2e8f9f7 48
<> 144:ef7eb2e8f9f7 49 void gpio_mode(gpio_t *obj, PinMode mode) {
<> 144:ef7eb2e8f9f7 50 pin_mode(obj->pin, mode);
<> 144:ef7eb2e8f9f7 51 }
<> 144:ef7eb2e8f9f7 52
<> 144:ef7eb2e8f9f7 53 void gpio_dir(gpio_t *obj, PinDirection direction) {
<> 144:ef7eb2e8f9f7 54 MBED_ASSERT(obj->pin != (PinName)NC);
<> 144:ef7eb2e8f9f7 55 switch (direction) {
<> 144:ef7eb2e8f9f7 56 case PIN_INPUT :
<> 144:ef7eb2e8f9f7 57 *obj->reg_dir &= ~obj->mask;
<> 144:ef7eb2e8f9f7 58 break;
<> 144:ef7eb2e8f9f7 59 case PIN_OUTPUT:
<> 144:ef7eb2e8f9f7 60 *obj->reg_dir |= obj->mask;
<> 144:ef7eb2e8f9f7 61 break;
<> 144:ef7eb2e8f9f7 62 }
<> 144:ef7eb2e8f9f7 63 }