File content as of revision 5:aa0424f31fa1:

#include "mbed.h"
#include "sbDriver.h"
#include "movie.h"
# define M_PI           3.14159265358979323846

/* VARIOUS EXAMPLES OF HOW TO USE the shiftBriteDisplay class and the movie class follows below.
Please note, this is all 'beerware' code but I would appreciate a mention in your code headers
if you use some/all of my code/classes. My name is Johan Kritzinger and I go by 'JoKer' on MBED.
My C++ is not that hot (I'm an old PLM-51 and C programmer) but the only way to learn is to do.
Any questions, please feel free to ask.
*/


//6 leds example. Format it suitably for easy reading
unsigned short int aMovie[] = {
    /* LED1      LED2      LED3      LED4      LED5      LED6 */
    10,0,0,    0,0,0,    0,0,0,    0,0,0,    0,0,0,    0,0,0, /*Frame 0*/
       0,0,0, 100,0,0,    0,0,0,    0,0,0,    0,0,0,    0,0,0, /*Frame 1*/
       0,0,0,    0,0,0,    500,0,0, 0,0,0,    0,0,0,    0,0,0, /*Frame 2*/
       0,0,0,    0,0,0,    0,0,0,    750,0,0, 0,0,0,    0,0,0, /*Frame 3*/
       0,0,0,    0,0,0,    0,0,0,    0,0,0,    900,0,0, 0,0,0, /*Frame 4*/
       0,0,0,    0,0,0,    0,0,0,    0,0,0,    0,0,0,    1023,0,0, /*Frame 5*/
       0,0,0,    0,0,0,    0,0,0,    0,0,0,    900,0,0, 0,0,0, /*Frame 6*/
       0,0,0,    0,0,0,    0,0,0,    750,0,0, 0,0,0,    0,0,0, /*Frame 7*/
       0,0,0,    0,0,0,    500,0,0, 0,0,0,    0,0,0,    0,0,0, /*Frame 8*/
       0,0,0, 100,0,0,    0,0,0,    0,0,0,    0,0,0,    0,0,0  /*Frame 9*/
   /*A simple 'cylon' scanner 'movie'*/    
};


Serial PC(PTA2, PTA1);//So I can use Serial as output to terminal and input

//================== HARDWARE CONNECTIONS =========================================
//NB!!! I have only tested this on the FRDM KL25Z and h/w connection as detailed below    
//Instanced of DigitalOut for control SB signals
DigitalOut latch(PTC16);//010=latch
DigitalOut enable(PTA13);//0= enabled
DigitalOut reset(PTC12);
//Instance of the SPI contoller for SB data
SPI spi(PTD2,NC,PTD1);//PDT2 = MOSI=DATA. PDT1=CLK
//=================== END OF HARDWARE CONNECTIONS =================================

int main() {
  
    
//Instanciate a ticker object to handle framerate updates for the SB display    
Ticker t;

//Instanciate a string of 5 sb modules and tell the driver object where the control/data pins are
shiftBriteDisplay sbDisplay(latch, enable, reset, spi,6);


/*

//Example calls to method f() of shiftBriteDisplay class
//in this case, 6 of these statements wold be required to build one frame
//HOW TO BUILD A FRAME IF YOU ARE NOT USING THE MOVIE CLASS
sbDisplay.setLed(0,0XFF0000);//Red
sbDisplay.setLed(1,0X00FF00);//Green
sbDisplay.setLed(2,0X0000FF);//Blue
sbDisplay.setLed(3,0XFFFF00);//Yellow
sbDisplay.setLed(4,0X00FFFF); //Cyan?
sbDisplay.setLed(5,0XFF00FF); // Purple

//HOW TO ADJUST THE CURRENT CONTROLLERS USED FOR DOT CORRECTION
sbDisplay.setCurrentCorr(0,0,0);//suggested default value cor current control regs. Values g&b=100, r=120
sbDisplay.displayFrame();//force an update
wait(2);
sbDisplay.setCurrentCorr(127,127,127);//This should be MAX
wait(2);
//sbDisplay.setCurrentCorr(0x78,0x64,0x64);//sb suggested default
    sbDisplay.setCurrentCorr(0,0,0);//Dim

wait(2);
PC.printf("INVERTED\r\n");
sbDisplay.invert();
sbDisplay.displayFrame();
wait(2);
PC.printf("FLIP\r\n");
sbDisplay.flip();
sbDisplay.displayFrame();
wait(2);
    sbDisplay.setLed(0,0XFF0000);//Red
    sbDisplay.setLed(1,0X000500);//Green
    sbDisplay.setLed(2,0X000005);//Blue
    sbDisplay.setLed(3,0X050500);//Yellow
    sbDisplay.setLed(4,0X000505); //Cyan?
    sbDisplay.setLed(5,0X050005); // Purple
    sbDisplay.displayFrame(); //get it on the LEDS

PC.printf("RotateL");
unsigned int loop;
for (loop=0; loop != 100; loop++){
sbDisplay.rotateLeft();
sbDisplay.displayFrame();
wait(0.1);
}
PC.printf("RotateR");
//unsigned int loop;
for (loop=0; loop != 100; loop++){
sbDisplay.rotateRight();
sbDisplay.displayFrame();
wait(0.1);
}
for(loop=0; loop !=6; loop++){
    sbDisplay.shiftRight();
    sbDisplay.displayFrame();
    wait(0.2);
}
         
 
    sbDisplay.setLed(0,0X0F0000);//Red
    sbDisplay.setLed(1,0X000F00);//Green
    sbDisplay.setLed(2,0X00000F);//Blue
    sbDisplay.setLed(3,0X0F0F00);//Yellow
    sbDisplay.setLed(4,0X000F0F); //Cyan?
    sbDisplay.setLed(5,0X0F000F); // Purple
    sbDisplay.displayFrame(); //get it on the LEDS
    wait(0.5);
    sbDisplay.setCurrentCorr(0,0,0);//Dim
 
    sbDisplay.displayFrame(); //get it on the LEDS

//Alternative to calling displayFrame() yourself, setup the framerate and update the display using Ticker e.g.
//t.attach_us(&sbDisplay,&shiftBriteDisplay::displayFrame,41666);//call updateFrame 24 times per second (every 41666uS)
//or t.attach(&sbDisplay,&shiftBriteDisplay::displayFrame,0.5);// or only every 0.5s for testing
   
    
//
//EXPANDING THE FUNCTIONALITY OF shiftBriteDisplay class; USING THE MOVIE CLASS
//I know, i know, 'MOVIE' is a HUGE stretch but it sounds good right?!?!   :) 
//
//Note, it uses the previously declared sbDisplay object. It is passed as a reference.
    movie myMovie(aMovie,sbDisplay,sizeof(aMovie));
    myMovie.setRepeat(1);

    t.attach(&myMovie,&movie::play,0.05);//Beware, if you go too fast here the FRDM will crash
*/

double p;
unsigned int j;
    for (j=0; j != sbDisplay.getModuleCount(); j++){
        sbDisplay.setLed(j,0,0,0);//set all led to black
    }
    sbDisplay.displayFrame();//get it on the leds
    sbDisplay.setCurrentCorr(0,0,0);//Dim down to 30%
   while(1){ // Nothing going on in the main loop as Ticker calls the appropriate member function
//Test modified shiftRight - simple colour chaser
        for(p=0; p <= (2.0*M_PI); p+=M_PI/((double)sbDisplay.getModuleCount()*2.0)){
            //cycle through 0-pi
            //sbDisplay.shiftRight((unsigned short int)(5000.0*(1+sin(p+0))),(unsigned short int)(5000.0*(1+sin(p+(2.0*M_PI)/3.0))),(unsigned short int)(5000.0*(1+sin(p+2.0*((2.0*M_PI)/3.0)))));
            sbDisplay.shiftRight((unsigned short int)(500.0*(1+sin(p))),(unsigned short int)(500.0*(1+sin(p+(120.0*(M_PI/180.0))))),(unsigned short int)(500.0*(1+sin(p+(240.0*(M_PI/180.0))))));
            sbDisplay.displayFrame();
            wait(1.0/((double)sbDisplay.getModuleCount()/2.0));
        }
    }
}


/*TODO - 
Inheritance is one of the great features of object oriented languages like C++. The stream methods are not included in serial to allow you to use them in other classes as well. They are for example also included in the TextLCD class and in my enhanced TextLCD class. All you need to do to make use of the powerful printf features is implement a putc() method in your own new class.
from https://mbed.org/questions/1029/pcprintf-a-method/

*/