Jhonattan González
final DA
Dependencies: mbed mbed-rtos AM2320 Adafruit_GFX TextLCD ssd1306_library
Revision 0:1e97811b8a15, committed 2020-11-04
- Comitter:
- Jhonattan38
- Date:
- Wed Nov 04 17:19:56 2020 +0000
- Commit message:
- final
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/AM2320.lib Wed Nov 04 17:19:56 2020 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/yasuyuki/code/AM2320/#766868b34d56
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Adafruit_GFX.lib Wed Nov 04 17:19:56 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/st17099ng/code/Adafruit_GFX/#2fe73307cb3c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Wed Nov 04 17:19:56 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/simon/code/TextLCD/#308d188a2d3a
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Wed Nov 04 17:19:56 2020 +0000
@@ -0,0 +1,171 @@
+#include "mbed.h"
+#include "stdlib.h"
+#include "TextLCD.h"
+#include "AM2320.h"
+//------------------------
+#include "Adafruit_SSD1306.h"
+#include "Adafruit_GFX.h"
+#include "Adafruit_GFX_Config.h"
+#include "rtos.h"
+//------------------------
+
+
+AnalogIn HPF(PA_0), BPF(PA_1), LPF(PA_4);
+TextLCD pantalla(PA_8,PA_9,PA_10,PB_3,PB_4,PB_5,TextLCD::LCD16x2);
+Serial pc(PB_10,PB_11);
+DigitalOut led(PC_13);
+I2C i2c(PB_9,PB_8);
+AM2320 am2320(i2c);
+I2CSlave i2c2(PB_9,PB_8);
+
+Adafruit_SSD1306_I2c oled(i2c,PB_7,0x78,64,128);
+
+Ticker T,ticker;
+
+InterruptIn calibrador(PA_7),calibrador2(PA_6);
+
+////
+struct PROYECT : Adafruit_GFX {
+ PROYECT(int16_t x, int16_t y): Adafruit_GFX (x,y){}
+};
+////
+void OLED();
+char msg[10];
+float humedad;
+float temperatura,t,t2;
+bool bandera=false;
+
+void calibrar_Up(){
+ bandera=true;
+ if((calibrador!=0)&&(bandera==true)){
+ t2++;
+ bandera=false;
+ }
+}
+
+void calibrar_Down(){
+ bandera=true;
+ if((calibrador!=0)&&(bandera==true)){
+ t2--;
+ bandera=false;
+ }
+}
+
+void inicio(void);
+
+uint16_t data_send_t,data_send_h;
+
+void Sensor(){
+ humedad = am2320.humidity();
+ t = am2320.temperature();
+ temperatura=t-t2;
+
+ data_send_h = humedad;
+ data_send_t = temperatura;
+ pc.printf("-%d-%d-\n",data_send_t,data_send_h);
+ wait_ms(200);
+}
+
+void leer(){
+
+}
+
+int main(){
+
+
+
+ inicio();
+ pc.baud(115200);
+ // pc.attach(&leer,Serial::RxIrq);
+
+ calibrador.rise(&calibrar_Up);
+ calibrador2.rise(&calibrar_Down);
+
+ //char buf[10];
+ //char msg[] = "Slave!";
+ //slaveO.address(0x78);
+ //slaveA.address(0xB8);
+
+
+ int t=1604340235; /// semilla del tiempo
+ set_time(t);
+
+ while(1) {
+ //int i = slave.receive();
+ //switch (i)
+ /* pantalla.locate(0,0);
+ pantalla.printf("%2.2f ",humedad/10);
+ pantalla.printf("%%");
+ pantalla.locate(0,1);
+ pantalla.printf("%2.2f C",temperatura/10);*/
+ OLED();
+ Sensor();
+
+
+ }
+}
+
+void OLED(){
+ oled.clearDisplay();
+ // oled.printf("%s\r", ctime(&seconds));
+ time_t seconds = time(NULL);
+ oled.setTextCursor(10,0);
+ oled.printf("%s", ctime(&seconds));
+
+ oled.setTextCursor(38,17);
+ oled.printf("%s"," SPI/ I2C");
+
+ oled.display();
+ wait_ms(16);
+}
+void inicio(void){
+ wait(2);
+ led=!led;
+ wait(1);
+ pantalla.cls();
+ pantalla.printf("Bienvenido");
+ wait(1.5);
+ pantalla.cls();
+ pantalla.printf("Muestreo de I2C\ny SPI");
+ wait(2.5);
+ pantalla.cls();
+ pantalla.printf("Sensor AM2320\nOLED y microSD");
+ wait(2.5);
+ led=!led;
+ pantalla.cls();
+}
+
+/*
+
+#if !DEVICE_I2CSLAVE
+#error [NOT_SUPPORTED] I2C Slave is not supported
+#endif
+
+I2CSlave slave(D14, D15);
+
+int main()
+{
+ char buf[10];
+ char msg[] = "Slave!";
+
+ slave.address(0xA0);
+ while (1) {
+ int i = slave.receive();
+ switch (i) {
+ case I2CSlave::ReadAddressed:
+ slave.write(msg, strlen(msg) + 1); // Includes null char
+ break;
+ case I2CSlave::WriteGeneral:
+ slave.read(buf, 10);
+ printf("Read G: %s\n", buf);
+ break;
+ case I2CSlave::WriteAddressed:
+ slave.read(buf, 10);
+ printf("Read A: %s\n", buf);
+ break;
+ }
+ for (int i = 0; i < 10; i++) {
+ buf[i] = 0; // Clear buffer
+ }
+ }
+}*/
\ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-rtos.lib Wed Nov 04 17:19:56 2020 +0000 @@ -0,0 +1,1 @@ +https://mbed.org/users/mbed_official/code/mbed-rtos/#58563e6cba1e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Nov 04 17:19:56 2020 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/0ab6a29f35bf \ No newline at end of file
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ssd1306_library.lib Wed Nov 04 17:19:56 2020 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/rodriguj/code/ssd1306_library/#57209a7e9cba