t
Dependencies: DM_FATFileSystem DM_HttpServer DM_USBHost EthernetInterface USBDevice mbed-rpc mbed-rtos
Fork of DMSupport by
meas.h
- Committer:
- embeddedartists
- Date:
- 2014-12-08
- Revision:
- 4:6fdcdf7aff8d
- Child:
- 31:d47cffcb0a3e
File content as of revision 4:6fdcdf7aff8d:
/* * Copyright 2014 Embedded Artists AB * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef _MEAS_H_ #define _MEAS_H_ /****************************************************************************** * Includes *****************************************************************************/ #include "mbed.h" #include "dm_board_config.h" /****************************************************************************** * Typedefs and defines *****************************************************************************/ // Internal macros, don't use directly #if defined(DM_BOARD_ENABLE_MEASSURING_PINS) #define _INTERNAL_SET_MEAS_PIN(__port, __pin) ((LPC_GPIO ## __port)->SET = (1UL << (__pin))) #define _INTERNAL_CLR_MEAS_PIN(__port, __pin) ((LPC_GPIO ## __port)->CLR = (1UL << (__pin))) #else #define _INTERNAL_SET_MEAS_PIN(__port, __pin) do {} while(0) #define _INTERNAL_CLR_MEAS_PIN(__port, __pin) do {} while(0) #endif // Manipulates measurement pin 1 which is GPIO1[24], available on J10-7 #define SET_MEAS_PIN_1() _INTERNAL_SET_MEAS_PIN(1, 24) #define CLR_MEAS_PIN_1() _INTERNAL_CLR_MEAS_PIN(1, 24) // Manipulates measurement pin 2 which is GPIO1[23], available on J10-8 #define SET_MEAS_PIN_2() _INTERNAL_SET_MEAS_PIN(1, 23) #define CLR_MEAS_PIN_2() _INTERNAL_CLR_MEAS_PIN(1, 23) // Manipulates measurement pin 3 which is GPIO1[20], available on J10-9 #define SET_MEAS_PIN_3() _INTERNAL_SET_MEAS_PIN(1, 20) #define CLR_MEAS_PIN_3() _INTERNAL_CLR_MEAS_PIN(1, 20) // Manipulates measurement pin 4 which is GPIO1[19], available on J10-10 #define SET_MEAS_PIN_4() _INTERNAL_SET_MEAS_PIN(1, 19) #define CLR_MEAS_PIN_4() _INTERNAL_CLR_MEAS_PIN(1, 19) #if defined(DM_BOARD_ENABLE_MEASSURING_PINS) #define _INTERNAL_INIT_MEAS() do {\ LPC_IOCON->P1_19 &= ~0x7; \ LPC_IOCON->P1_20 &= ~0x7; \ LPC_IOCON->P1_23 &= ~0x7; \ LPC_IOCON->P1_24 &= ~0x7; \ LPC_GPIO1->DIR |= (1<<19) | (1<<20) | (1<<23) | (1<<24); \ CLR_MEAS_PIN_1(); \ CLR_MEAS_PIN_2(); \ CLR_MEAS_PIN_3(); \ CLR_MEAS_PIN_4(); \ } while(0) #else #define _INTERNAL_INIT_MEAS() do {} while(0) #endif /****************************************************************************** * Global Variables *****************************************************************************/ #endif /* end _MEAS_H_ */