wifi test
Dependencies: X_NUCLEO_IKS01A2 mbed-http
SRadioInit Struct Reference
[Radio Exported Types]
SPIRIT Radio Init structure definition. More...
#include <SPIRIT_Radio.h>
Data Fields | |
int16_t | nXtalOffsetPpm |
uint32_t | lFrequencyBase |
uint32_t | nChannelSpace |
uint8_t | cChannelNumber |
ModulationSelect | xModulationSelect |
uint32_t | lDatarate |
uint32_t | lFreqDev |
uint32_t | lBandwidth |
Detailed Description
SPIRIT Radio Init structure definition.
Definition at line 259 of file SPIRIT_Radio.h.
Field Documentation
uint8_t cChannelNumber |
Specifies the channel number. This value is multiplied by the channel spacing and added to synthesizer base frequency to generate the actual RF carrier frequency
Definition at line 276 of file SPIRIT_Radio.h.
uint32_t lBandwidth |
Specifies the channel filter bandwidth expressed in Hz. This parameter can be in the range between 1100 and 800100 Hz
Definition at line 288 of file SPIRIT_Radio.h.
uint32_t lDatarate |
Specifies the datarate expressed in bps. This parameter can be in the range between 100 bps and 500 kbps
Definition at line 283 of file SPIRIT_Radio.h.
uint32_t lFreqDev |
Specifies the frequency deviation expressed in Hz. This parameter can be in the range: [F_Xo*8/2^18, F_Xo*7680/2^18] Hz
Definition at line 286 of file SPIRIT_Radio.h.
uint32_t lFrequencyBase |
Specifies the base carrier frequency (in Hz), i.e. the carrier frequency of channel #0. This parameter can be in one of the following ranges: High_Band: from 779 MHz to 915 MHz Middle Band: from 387 MHz to 470 MHz Low Band: from 300 MHz to 348 MHz
Definition at line 265 of file SPIRIT_Radio.h.
uint32_t nChannelSpace |
Specifies the channel spacing expressed in Hz. The channel spacing is expressed as: NxFREQUENCY_STEPS, where FREQUENCY STEPS is F_Xo/2^15. This parameter can be in the range: [0, F_Xo/2^15*255] Hz
Definition at line 271 of file SPIRIT_Radio.h.
int16_t nXtalOffsetPpm |
Specifies the offset frequency (in ppm) to compensate crystal inaccuracy expressed as signed value.
Definition at line 261 of file SPIRIT_Radio.h.
Specifies the modulation. This parameter can be any value of ModulationSelect
Definition at line 280 of file SPIRIT_Radio.h.
Generated on Tue Jul 12 2022 17:09:12 by 1.7.2