Chen Wei Ting
read EMG, IMU, encoder
Fork of
LSM9DS1_project
by 
曾 宗圓
Diff: main.cpp
- Revision:
- 1:b1562831bbaf
- Parent:
- 0:9632b831b6c1
- Child:
- 2:c889fecf9afe
--- a/main.cpp Mon Oct 19 16:52:59 2015 +0000
+++ b/main.cpp Wed Dec 20 15:45:02 2017 +0000
@@ -1,48 +1,276 @@
-// LSM9DS91 Demo
-
#include "mbed.h"
#include "LSM9DS1.h"
-
-// refresh time. set to 500 for part 2 and 50 for part 4
-#define REFRESH_TIME_MS 1000
+#include "AS5145.h"
-// Verify that the pin assignments below match your breadboard
-LSM9DS1 imu(p9, p10);
-
+LSM9DS1 imu3(D5, D7);
+LSM9DS1 imu2(D3, D6);
+LSM9DS1 imu(D14, D15);
+AnalogIn sEMG(PB_0);
+AnalogIn sEMG2(PC_0);
+AnalogIn sEMG3(PC_2);
+AnalogIn sEMG4(PC_3);
Serial pc(USBTX, USBRX);
+Ticker timer1;
+Ticker timer2;
-//Init Serial port and LSM9DS1 chip
-void setup()
-{
- // Use the begin() function to initialize the LSM9DS0 library.
- // You can either call it with no parameters (the easy way):
- uint16_t status = imu.begin();
-
- //Make sure communication is working
- pc.printf("LSM9DS1 WHO_AM_I's returned: 0x%X\r\n", status);
- pc.printf("Should be 0x683D\r\n");
-}
+float T = 0.001;
+/********************************************************************/
+//function declaration
+/********************************************************************/
+void init_TIMER(void);
+void timer1_interrupt(void);
+void setup(void);
+void estimator(float axm[3],float aym[3],float azm[3],float w3[3],float w2[3],float w1[3],float alpha);
+float lpf(float input, float output_old, float frequency);
+void angle_fn(float x1_hat[3],float x2_hat[3]);
+void pitch_dot_fn(float w3[3],float w2[3],float w1[3],float sinroll[3],float cosroll[3]);
+void pitch_double_dot_fn(float pitch_dot[3],float pitch_dot_old[3]);
+/********************************************************************/
+// sensor data
+/********************************************************************/
+int16_t Gyro_axis_data[9] = {0}; // X, Y, Z axis
+int16_t Acce_axis_data[9] = {0}; // X, Y, Z axis
+float Gyro_axis_data_f[9] = {0};
+float Gyro_axis_data_f_old[9] = {0};
+float Acce_axis_data_f[9] = {0};
+float Acce_axis_data_f_old[9] = {0};
+float axm[3] = {0.0f};
+float aym[3] = {0.0f};
+float azm[3] = {0.0f};
+float w1[3] = {0.0f};
+float w2[3] = {0.0f};
+float w3[3] = {0.0f};
+//estimator
+float x1_hat[3] = {0.0f};
+float x2_hat[3] = {0.0f};
+float sinroll[3] = {0.0f};
+float cosroll[3] = {0.0f};
+float sinpitch[3] = {0.0f};
+float pitch_angle[3] = {0.0f};
+float roll_angle[3] = {0.0f};
+float yaw_dot[3] = {0.0f};
+float pitch_dot[3] = {0.0f};
+float pitch_double_dot[3] = {0.0f};
+float pitch_double_dot_f[3] = {0.0f};
+float pitch_double_dot_f_old[3] = {0.0f};
+float pitch_dot_old[3] = {0.0f};
+float axm_f[3] = {0.0f};
+float axm_f_old[3] = {0.0f};
+float w3aym_f[3] = {0.0f};
+float w3aym_f_old[3] = {0.0f};
+float w2azm_f[3] = {0.0f};
+float w2azm_f_old[3] = {0.0f};
+float aym_f[3] = {0.0f};
+float aym_f_old[3] = {0.0f};
+float w3axm_f[3] = {0.0f};
+float w3axm_f_old[3] = {0.0f};
+float w1azm_f[3] = {0.0f};
+float w1azm_f_old[3] = {0.0f};
+float azm_f[3] = {0.0f};
+float azm_f_old[3] = {0.0f};
+float w2axm_f[3] = {0.0f};
+float w2axm_f_old[3] = {0.0f};
+float w1aym_f[3] = {0.0f};
+float w1aym_f_old[3] = {0.0f};
+//sEMG variable
+float emg_value[4] = {0.0f};
int main()
{
- setup(); //Setup sensor and Serial
- pc.printf("------ LSM9DS1 Demo -----------\r\n");
-
- while (true)
+ pc.baud(230400);
+ setup(); //Setup sensors
+ AS5145_begin(); //begin encoder
+ init_TIMER();
+ while (1)
{
-
- imu.readAccel();
-
- pc.printf("A: %2f, %2f, %2f\r\n", imu.ax, imu.ay, imu.az);
-
- imu.readGyro();
-
- pc.printf("G: %2f, %2f, %2f\r\n", imu.gx, imu.gy, imu.gz);
-
- imu.readMag();
-
- pc.printf("M: %2f, %2f, %2f\r\n\r\n", imu.mx, imu.my, imu.mz);
-
- wait_ms(REFRESH_TIME_MS);
+ pc.printf("%f,%f,%f,%f,%f,%f,%f,%f,%f,%f,%d,%d\n",pitch_angle[0],pitch_dot[0],pitch_angle[1],pitch_dot[1],pitch_angle[2],pitch_dot[2],emg_value[0],emg_value[1],emg_value[2],emg_value[3],position[0]*360/4096, position[1]*360/4096);
+ wait(0.1);
+ //pc.printf("%f,%f,%f,%f\n",emg_value[0],emg_value[1],emg_value[2],emg_value[3]);
+ //pc.printf("%f,%f,%f,%f,%f,%d,%d\n", pitch_angle[0], pitch_angle[1], roll_angle[1], pitch_angle[2], roll_angle[2], position[0]*360/4096, position[1]*360/4096);
+ //pc.printf("IMU: %2f,%2f\r\n", pitch_angle[0], roll_angle[0]);
+ //pc.printf("IMU2: %2f,%2f\r\n", pitch_angle[1], roll_angle[1]);
+ //pc.printf("IMU3: %2f,%2f\r\n", pitch_angle[2], roll_angle[2]);
+ //pc.printf("position: %d,%d\r\n", position[0], position[1]);
+ //pc.printf("roll_angle: %2f\r\n",roll_angle);
+ //pc.printf("A: %2f, %2f, %2f\r\n", imu2.ax*Acce_gain_x_2, imu2.ay*Acce_gain_y_2, imu2.az*Acce_gain_z_2);
}
}
+void setup()
+{
+ imu.begin();
+ imu2.begin();
+ imu3.begin();
+}
+/********************************************************************/
+// init_TIMER
+/********************************************************************/
+void init_TIMER(void)
+{
+ timer1.attach_us(&timer1_interrupt, 10000);//10ms interrupt period (100 Hz)
+ timer2.attach_us(&ReadValue, 1000);//1ms interrupt period (1000 Hz)
+}
+/********************************************************************/
+// timer1_interrupt
+/********************************************************************/
+void timer1_interrupt(void)
+{
+ int i;
+ imu.readAccel();
+ imu.readGyro();
+ imu2.readAccel();
+ imu2.readGyro();
+ imu3.readAccel();
+ imu3.readGyro();
+ // sensor raw data
+ Acce_axis_data[0] = imu.ax*Acce_gain_x;
+ Acce_axis_data[1] = imu.ay*Acce_gain_y;
+ Acce_axis_data[2] = imu.az*Acce_gain_z;
+ Acce_axis_data[3] = -imu2.ax*Acce_gain_x_2;
+ Acce_axis_data[4] = imu2.az*Acce_gain_y_2;
+ Acce_axis_data[5] = imu2.ay*Acce_gain_z_2;
+ Acce_axis_data[6] = -imu3.ax*Acce_gain_x_2;
+ Acce_axis_data[7] = -imu3.az*Acce_gain_y_2;
+ Acce_axis_data[8] = -imu3.ay*Acce_gain_z_2;
+
+ Gyro_axis_data[0] = imu.gx*Gyro_gain_x;
+ Gyro_axis_data[1] = imu.gy*Gyro_gain_y;
+ Gyro_axis_data[2] = imu.gz*Gyro_gain_z;
+ Gyro_axis_data[3] = -imu2.gx*Gyro_gain_x_2;
+ Gyro_axis_data[4] = imu2.gz*Gyro_gain_y_2;
+ Gyro_axis_data[5] = imu2.gy*Gyro_gain_z_2;
+ Gyro_axis_data[6] = -imu3.gx*Gyro_gain_x_2;
+ Gyro_axis_data[7] = -imu3.gz*Gyro_gain_y_2;
+ Gyro_axis_data[8] = -imu3.gy*Gyro_gain_z_2;
+
+ for(i=0;i<9;i++)
+ {
+ Acce_axis_data_f[i] = lpf(Acce_axis_data[i],Acce_axis_data_f_old[i],15);
+ Acce_axis_data_f_old[i] = Acce_axis_data_f[i];
+ Gyro_axis_data_f[i] = lpf(Gyro_axis_data[i],Gyro_axis_data_f_old[i],15);
+ Gyro_axis_data_f_old[i] = Gyro_axis_data_f[i];
+ }
+
+ axm[0] = Acce_axis_data_f[0];
+ aym[0] = Acce_axis_data_f[1];
+ azm[0] = Acce_axis_data_f[2];
+ w1[0] = Gyro_axis_data_f[0];
+ w2[0] = Gyro_axis_data_f[1];
+ w3[0] = Gyro_axis_data_f[2];
+ axm[1] = Acce_axis_data_f[3];
+ aym[1] = Acce_axis_data_f[4];
+ azm[1] = Acce_axis_data_f[5];
+ w1[1] = Gyro_axis_data_f[3];
+ w2[1] = Gyro_axis_data_f[4];
+ w3[1] = Gyro_axis_data_f[5];
+ axm[2] = Acce_axis_data_f[6];
+ aym[2] = Acce_axis_data_f[7];
+ azm[2] = Acce_axis_data_f[8];
+ w1[2] = Gyro_axis_data_f[6];
+ w2[2] = Gyro_axis_data_f[7];
+ w3[2] = Gyro_axis_data_f[8];
+
+
+ estimator(axm,aym,azm,w3,w2,w1,20);
+ angle_fn(x1_hat,x2_hat);
+ pitch_dot_fn(w3,w2,w1,sinroll,cosroll);
+ pitch_double_dot_fn(pitch_dot,pitch_dot_old);
+
+ for(i=0;i<3;i++)
+ {
+ pitch_dot_old[i] = pitch_dot[i];
+ }
+ emg_value[0] = sEMG.read();
+ emg_value[1] = sEMG2.read();
+ emg_value[2] = sEMG3.read();
+ emg_value[3] = sEMG4.read();
+}
+/********************************************************************/
+// estimator
+/********************************************************************/
+void estimator(float axm[3],float aym[3],float azm[3],float w3[3],float w2[3],float w1[3],float alpha)
+{
+ int i;
+ for(i=0;i<3;i++)
+ {
+ axm_f[i] = lpf(axm[i],axm_f_old[i],alpha);
+ axm_f_old[i] = axm_f[i];
+ w3aym_f[i] = lpf(w3[i]*aym[i],w3aym_f_old[i],alpha);
+ w3aym_f_old[i] = w3aym_f[i];
+ w2azm_f[i] = lpf(w2[i]*azm[i],w2azm_f_old[i],alpha);
+ w2azm_f_old[i] = w2azm_f[i];
+ aym_f[i] = lpf(aym[i],aym_f_old[i],alpha);
+ aym_f_old[i] = aym_f[i];
+ w3axm_f[i] = lpf(w3[i]*axm[i],w3axm_f_old[i],alpha);
+ w3axm_f_old[i] = w3axm_f[i];
+ w1azm_f[i] = lpf(w1[i]*azm[i],w1azm_f_old[i],alpha);
+ w1azm_f_old[i] = w1azm_f[i];
+
+ x1_hat[i] = axm_f[i] + w3aym_f[i]/alpha - w2azm_f[i]/alpha;
+ x2_hat[i] = -w3axm_f[i]/alpha + aym_f[i] + w1azm_f[i]/alpha;
+ }
+
+}
+/********************************************************************/
+// angle_fn
+/********************************************************************/
+void angle_fn(float x1_hat[3],float x2_hat[3])
+{
+ int i;
+ for(i=0;i<3;i++)
+ {
+ sinroll[i] = x2_hat[i]*(-0.1020);
+ if(sinroll[i] >= 1.0f)
+ {
+ sinroll[i] = 1.0;
+ cosroll[i] = 0.0;
+ }
+ else if(sinroll[i] <= -1.0f)
+ {
+ sinroll[i] = -1.0;
+ cosroll[i] = 0.0;
+ }
+ else cosroll[i] = sqrt(1-(sinroll[i]*sinroll[i]));
+ roll_angle[i] = (asin(sinroll[i]))*180/pi;
+ sinpitch[i] = x1_hat[i]*(0.1020f)/cosroll[i];
+ if(sinpitch[i] >= 1.0f)
+ {
+ sinpitch[i] = 1.0;
+ }
+ else if(sinpitch[i] <= -1.0f)
+ {
+ sinpitch[i] = -1.0;
+ }
+
+ pitch_angle[i] = (asin(sinpitch[i]))*180/pi;
+ }
+}
+void pitch_dot_fn(float w3[3],float w2[3],float w1[3],float sinroll[3],float cosroll[3])
+{
+ int i;
+ for(i=0;i<3;i++)
+ {
+ yaw_dot[i] = (w3[i]*cosroll[i] - w1[i]*sinroll[i])/cosroll[i];
+ pitch_dot[i] = w2[i] - yaw_dot[i]*sinroll[i];
+ }
+}
+void pitch_double_dot_fn(float pitch_dot[3],float pitch_dot_old[3])
+{
+ int i;
+ for(i=0;i<3;i++)
+ {
+ pitch_double_dot[i] = (pitch_dot[i] - pitch_dot_old[i])/0.01f;
+ pitch_double_dot_f[i] = lpf(pitch_double_dot[i],pitch_double_dot_f_old[i],30);
+ pitch_double_dot_f_old[i] = pitch_double_dot_f[i];
+ }
+}
+/********************************************************************/
+// lpf
+/********************************************************************/
+float lpf(float input, float output_old, float frequency)
+{
+ float output = 0;
+
+ output = (output_old + frequency*T*input) / (1 + frequency*T);
+
+ return output;
+}
\ No newline at end of file