Revision 0:f1fb5b7d66a9, committed 2016-03-22

Comitter:

Hotboards

Date:

Tue Mar 22 22:19:40 2016 +0000

Commit message:

first release

Changed in this revision

diff -r 000000000000 -r f1fb5b7d66a9 Hotboards_temp.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Hotboards_temp.lib	Tue Mar 22 22:19:40 2016 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/users/Hotboards/code/Hotboards_temp/#f850ee1083ba

diff -r 000000000000 -r f1fb5b7d66a9 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Mar 22 22:19:40 2016 +0000
@@ -0,0 +1,42 @@
+/*
+  Hotboards temp Library - reading temperature
+ Read the temperaure in celsius degrees each two seconds and display
+ the value on the serial port.
+ The circuit 
+ *  VDD   -->  3.3v
+ *  SDA   -->  PB_9
+ *  SCL   -->  PB_8
+ *  GND   -->  GND
+ Library and example created by Diego from Hotboards
+ Ported to mbed by Pedro from Hotboards
+ This example code is in the public domain.
+ */
+#include "mbed.h"
+#include "Hotboards_temp.h"
+
+// new instance of serial port
+Serial pc(USBTX, USBRX);
+//I2C instance for the library
+I2C device( I2C_SDA, I2C_SCL ); 
+// instance a sensor with address number 7 (none of the jumpers on the board is short circuted)
+// and also 0.5 celsius degrees resolution
+Hotboards_temp sensor( device, Sensor_7);
+
+
+int main( void ) 
+{
+  // sensor init
+  sensor.init();
+ 
+    while(1)
+    {   
+         // read temperature in celcius degrees
+         float temp = sensor.read();
+         // print it to the serial port
+         pc.printf("Temperature: %3.1f C\r\n",temp);
+         // take the next value after 2 sec (just to not read too often)
+         wait(1);
+    }
+}
+
+

diff -r 000000000000 -r f1fb5b7d66a9 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Tue Mar 22 22:19:40 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/c0f6e94411f5
\ No newline at end of file