Driver to read switches, one at a time or an entire dip-sw
Dependents: input dip_switch dipsw_change input ... more
Diff: Hotboards_switches.h
- Revision:
- 0:8e569e04a0fb
diff -r 000000000000 -r 8e569e04a0fb Hotboards_switches.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Hotboards_switches.h Sun Feb 28 01:32:55 2016 +0000 @@ -0,0 +1,216 @@ +/* + Hotboards_switches.h - Driver to read interrupts + Hotboards Dip-switch board (http://hotboards.org) + Created by Diego Perez, January 16, 2016. + Released into the public domain. +*/ +#ifndef Hotboards_switches_h +#define Hotboards_switches_h + +#include "mbed.h" + +/** Hotboards_switches class. + * Used to read general purpose dip switches + * + * Example: + * @code + * #include "Hotboards_switches.h" + * + * Hotboards_switches sw( 5 ); + * + * int main( void ) + * { + * for(;;){ + * bool var = sw.read( ); + * wait( 0.2 ); + * } + * } + * @endcode + */ +class Hotboards_switches +{ + public : + /** Create Hotboards_switches instance for one sw + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one sw on pin 5 + * Hotboards_switches sw( 5 ); + * @endcode + */ + Hotboards_switches( PinName sw0, bool close=0 ); + + /** Create Hotboards_switches instance for two sw + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 2 sw on pin 5 and 6 + * Hotboards_switches sw( 5, 6 ); + * @endcode + */ + Hotboards_switches( PinName sw1, PinName sw0, bool close=0 ); + + /** Create Hotboards_switches instance for three sw + * @param sw2 pin where the sw 2 will be read it + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 3 sw on pin 5, 6 and 7 + * Hotboards_switches sw( 5, 6, 7 ); + * @endcode + */ + Hotboards_switches( PinName sw2, PinName sw1, PinName sw0, bool close=0 ); + + /** Create Hotboards_switches instance for four sw + * @param sw3 pin where the sw 3 will be read it + * @param sw2 pin where the sw 2 will be read it + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 4 sw on pin 5, 6, 7 and 8 + * Hotboards_switches sw( 5, 6, 7, 8 ); + * @endcode + */ + Hotboards_switches( PinName sw3, PinName sw2, PinName sw1, PinName sw0, bool close=0 ); + + /** Create Hotboards_switches instance for five sw + * @param sw4 pin where the sw 4 will be read it + * @param sw3 pin where the sw 3 will be read it + * @param sw2 pin where the sw 2 will be read it + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 5 sw on pin 5, 6, 7, 8 and 9 + * Hotboards_switches sw( 5, 6, 7, 8, 9 ); + * @endcode + */ + Hotboards_switches( PinName sw4, PinName sw3, PinName sw2, PinName sw1, PinName sw0, bool close=0 ); + + /** Create Hotboards_switches instance for six sw + * @param sw5 pin where the sw 5 will be read it + * @param sw4 pin where the sw 4 will be read it + * @param sw3 pin where the sw 3 will be read it + * @param sw2 pin where the sw 2 will be read it + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 6 sw on pin 5, 6, 7, 8, 9 and 10 + * Hotboards_switches sw( 5, 6, 7, 8, 9, 10 ); + * @endcode + */ + Hotboards_switches( PinName sw5, PinName sw4, PinName sw3, PinName sw2, PinName sw1, PinName sw0, bool close=0 ); + + /** Create Hotboards_switches instance for seven sw + * @param sw6 pin where the sw 6 will be read it + * @param sw5 pin where the sw 5 will be read it + * @param sw4 pin where the sw 4 will be read it + * @param sw3 pin where the sw 3 will be read it + * @param sw2 pin where the sw 2 will be read it + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 7 sw on pin 5, 6, 7, 8, 9, 10 and 11 + * Hotboards_switches sw( 5, 6, 7, 8, 9, 10, 11 ); + * @endcode + */ + Hotboards_switches( PinName sw6, PinName sw5, PinName sw4, PinName sw3, PinName sw2, PinName sw1, PinName sw0, bool close=0); + + /** Create Hotboards_switches instance for eight sw + * @param sw7 pin where the sw 7 will be read it + * @param sw6 pin where the sw 6 will be read it + * @param sw5 pin where the sw 5 will be read it + * @param sw4 pin where the sw 4 will be read it + * @param sw3 pin where the sw 3 will be read it + * @param sw2 pin where the sw 2 will be read it + * @param sw1 pin where the sw 1 will be read it + * @param sw0 pin where the sw 0 will be read it + * @param close logic level that gives you when the sw is closed + * + * Example: + * @code + * // instance one dip-sw with 8 sw on pin 5, 6, 7, 8, 9, 10, 11 and 12 + * Hotboards_switches sw( 5, 6, 7, 8, 9, 10, 11, 12 ); + * @endcode + */ + Hotboards_switches( PinName sw7, PinName sw6, PinName sw5, PinName sw4, PinName sw3, PinName sw2, PinName sw1, PinName sw0, bool close=0 ); + + /** Read a single sw or the entire Dip-switch state (open=0 or close=1) + * @return sw state(s) + * + * Example: + * @code + * // instance one sw on pin 7 and read its state (0 o 1) + * Hotboards_leds sw ( 7 ); + * bool val = sw.read( ); + * + * // instance an 8 sw dip-sw (pin9->sw7 ..... pin2->sw0) + * Hotboards_switches dipsw( 9, 8, 7, 6, 5, 4, 3, 2 ); + * // read the sw values (from 0 to 255) + * uint8_t val = dipsw.read( ); + * + * // instance a 4 dip-sw (pin2->sw3 ..... pin5->sw0) + * Hotboards_switches dipsw( 2, 3, 4, 5 ); + * // read sw 1 state (pin 4) + * bool val1 = dipsw.write( 1 ); + * // read sw 0 state (pin 5) + * bool val2 = dipsw.write( 0 ); + * @endcode + */ + uint8_t read( uint8_t sw=0xff ); + + /** Tells you if one or more sw has been change + * @return '1' if not changed + * + * Example: + * @code + * // instance one sw on pin 7 and read its state (0 o 1) + * Hotboards_leds sw ( 7 ); + * if( sw.hasItChange( )) + * bool val = sw.read( ); + * + * // instance an 8 sw dip-sw (pin9->sw7 ..... pin2->sw0) + * Hotboards_switches dipsw( 9, 8, 7, 6, 5, 4, 3, 2 ); + * // read the sw values (from 0 to 255) if it changes + * if( dipsw.hasItChange( ) ) + * uint8_t val = dipsw.read( ); + * + * // instance a 4 dip-sw (pin2->sw3 ..... pin5->sw0) + * Hotboards_switches dipsw( 2, 3, 4, 5 ); + * // read sw 1 state (pin 4) if it changes + * if( sw.hasItChange( 1 )) + * bool val = sw.read( 1 ); + * @endcode + */ + bool hasItChange( uint8_t sw=0xff ); + + private : + void begin( uint8_t sw, PinName pin ); + bool readSw( uint8_t sw ); + bool hasItChangeSw( uint8_t sw ); + DigitalIn *_sw[ 8 ]; + uint8_t _sws; + uint8_t _lastSwState; + bool _close; +}; + +#endif \ No newline at end of file