Hotboards MX
This sketch demonstrates how to use leftToRight() and rightToLeft() to move the cursor.
Dependencies: Hotboards_SpiLcd mbed
Revision 0:578fd358c3d3, committed 2016-02-02
- Comitter:
- Hotboards
- Date:
- Tue Feb 02 22:50:35 2016 +0000
- Commit message:
- First Release: Hotboards_SpiLcd_TextDirection
Changed in this revision
diff -r 000000000000 -r 578fd358c3d3 Hotboards_SpiLcd.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Hotboards_SpiLcd.lib Tue Feb 02 22:50:35 2016 +0000 @@ -0,0 +1,1 @@ +https://developer.mbed.org/users/Hotboards/code/Hotboards_SpiLcd/#b777b6147d99
diff -r 000000000000 -r 578fd358c3d3 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Tue Feb 02 22:50:35 2016 +0000
@@ -0,0 +1,74 @@
+/*
+ Hotboards_SpiLcd - TextDirection
+ Demonstrates the use a 16x2 LCD display. The Hotboards_SpiLcd
+ library works with all LCD displays that are compatible with the
+ ST7032 driver presented on Spi Lcd board (http://www.hotboards.org).
+ This sketch demonstrates how to use leftToRight() and rightToLeft()
+ to move the cursor.
+ The circuit:
+ * BKL --> GND
+ * VDD --> 3.3v
+ * GND --> GND
+ * SCK --> PA_5
+ * SI --> PA_6
+ * CS --> PB_15
+ * RS --> PB_14
+ * RST --> PB_13
+ Library and example ported by Diego from Hotboards and originally created
+ by David A. Mellis
+ library modified 5 Jul 2009
+ by Limor Fried (http://www.ladyada.net)
+ example added 9 Jul 2009
+ by Tom Igoe
+ modified 22 Nov 2010
+ by Tom Igoe
+*/
+#include "mbed.h"
+#include "Hotboards_SpiLcd.h"
+
+/* initialize an instance of SPI bus,setting the SPI pins*/
+SPI device(PA_7,PA_6,PA_5); /* SO, SI, SCK*/
+/* initialize the library with the numbers of the interface pins*/
+Hotboards_SpiLcd display( device, PB_15, PB_14, PB_13 ); /* SPI, CS, RS, RST */
+
+int thisChar = 'a';
+
+int main()
+{
+ /* set the spi frequency to 5MHz*/
+ device.frequency(5000000);
+ /* initialize internal lcd controller:*/
+ display.init();
+ // turn on the cursor:
+ display.cursor();
+
+ while(1)
+ {
+ // reverse directions at 'm':
+ if (thisChar == 'm')
+ {
+ // go right for the next letter
+ display.rightToLeft();
+ }
+ // reverse again at 's':
+ if (thisChar == 's')
+ {
+ // go left for the next letter
+ display.leftToRight();
+ }
+ // reset at 'z':
+ if (thisChar > 'z')
+ {
+ // go to (0,0):
+ display.home();
+ // start again at 0
+ thisChar = 'a';
+ }
+ // print the character
+ display.printf("%c",thisChar);
+ // wait a second:
+ wait(1);
+ // increment the letter:
+ thisChar++;
+ }
+}
diff -r 000000000000 -r 578fd358c3d3 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Tue Feb 02 22:50:35 2016 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/6f327212ef96 \ No newline at end of file