Diff: main.cpp

Revision:

1:f7f81ab19c7e

Parent:

0:1fdb07d055b9

--- a/main.cpp	Thu Jun 07 04:14:28 2018 +0000
+++ b/main.cpp	Tue Jul 17 06:16:01 2018 +0000
@@ -1,20 +1,7 @@
-//Test of cheap 13.56 Mhz RFID-RC522 module from eBay
-//This code is based on Martin Olejar's MFRC522 library. Minimal changes
-//Adapted for Nucleo STM32 F401RE. Should work on other Nucleos too
- 
-//Connect as follows:
-//RFID pins        ->  Nucleo header CN5 (Arduino-compatible header)
-//----------------------------------------
-//RFID IRQ=pin5    ->   Not used. Leave open
-//RFID MISO=pin4   ->   Nucleo SPI_MISO=PA_6=D12
-//RFID MOSI=pin3   ->   Nucleo SPI_MOSI=PA_7=D11
-//RFID SCK=pin2    ->   Nucleo SPI_SCK =PA_5=D13
-//RFID SDA=pin1    ->   Nucleo SPI_CS  =PB_6=D10
-//RFID RST=pin7    ->   Nucleo         =PA_9=D8
-//3.3V and Gnd to the respective pins                              
+                 
                               
 #include "mbed.h"
-#include "MFRC522.h"
+#include "NTPClient.h"
 #include "SPI.h"
 #include "MQTTEthernet.h"
 #include "MQTTClient.h"
@@ -23,28 +10,24 @@
  
 // Nucleo Pin for MFRC522 reset (pick another D pin if you need D8)
 //#define MF_RESET    D8
- 
-#define SPI_MOSI D11
-#define SPI_MISO D12
-#define SPI_SCK D13
-#define SPI_CS D10
-#define MF_RESET D9
-DigitalOut l1(D4);
-DigitalOut l2(D5);
-DigitalOut LedGreen(LED1);
+EthernetInterface eth;
+NTPClient ntpClient;
+
  
 //Serial connection to PC for output
-//Serial pc(USBTX, USBRX);
- 
-MFRC522    RfChip   (SPI_MOSI, SPI_MISO, SPI_SCK, SPI_CS, MF_RESET);
+Serial pc(USBTX, USBRX);
+ Serial a(D1,D0);
+char c[100]="";
  
 int main(void) {
     //pc.printf("starting...\n");
+    int cnt = 0;
     
     Serial pc(USBTX, USBRX);
-    pc.baud(115200);
+    Serial a(D1,D0);
+   // pc.baud(115200);
     printf("Wait a second...\r\n");
-    char* topic = "openhab/parents/command";
+    char* topic = "Vending machine";
     MQTTEthernet ipstack = MQTTEthernet();
     
     MQTT::Client<MQTTEthernet, Countdown> client = MQTT::Client<MQTTEthernet, Countdown>(ipstack);
@@ -52,9 +35,10 @@
     char* hostname = "172.16.73.4";
     int port = 1883;
     
-    int rc = ipstack.connect(hostname, port);
+ 
+     int rc = ipstack.connect(hostname, port);
     if (rc != 0)
-        printf("rc from TCP connect is %d\n", rc);
+    printf("rc from TCP connect is %d\n", rc);
         
     printf("Topic: %s\r\n",topic);
     
@@ -64,75 +48,72 @@
 
     if ((rc = client.connect(data)) == 0)
         printf("rc from MQTT connect is %d\n", rc);
- 
+           
+   // if ((rc = client.subscribe(topic, MQTT::QOS1, messageArrived)) != 0)
+//        printf("rc from MQTT subscribe is %d\n", rc); 
+// 
   //Init. RC522 Chip
-  RfChip.PCD_Init();
+
  
   while (true) {
-    //LedGreen = 1;
-    pc.printf("enterd loop...\n");
-    // Look for new cards
-    if ( ! RfChip.PICC_IsNewCardPresent())
-    {
-      wait_ms(500);
-      continue;
-    }
- 
-    // Select one of the cards
-    if ( ! RfChip.PICC_ReadCardSerial())
+    if (a.readable())
     {
-      wait_ms(500);
-      continue;
-    }
- 
-    //LedGreen = 0;
-    char data[20]="";
-    char data1[20]="";
+        
+        int i;
+        c[i]=0;
+        for(i=0;i<=15;i++){
+        char c1 =a.getc();
+        c[i] = c1; 
+        } 
+   pc.printf("The value returned is %s ",c);
+  
+    char domainName[3][80] = {"kr.pool.ntp.org", "time.bora.net", "time.nuri.net"};//SET TO DOMAIN NAME OF SERVER GETTING TIME FROM
+    char buffer[80]; //BUFFER TO HOLD FORMATTED TIME DATA
+    time_t sysTime;
+             pc.printf("Server IP Address is %s\r\n", eth.getIPAddress());
     
-    // Print Card UID
-    pc.printf("Card UID: ");
-    printf("Size of UID: %d \n",RfChip.uid.size);
-    for (uint8_t i = 0; i < RfChip.uid.size; i++)
-    {
-      char temp[5];
-      pc.printf(" %X02", RfChip.uid.uidByte[i]);
-      sprintf(temp,"%X02", RfChip.uid.uidByte[i]);
-      strcat(data,temp);
-    }
+    pc.printf("Getting time information by using NTP...\r\n");
     
-    /*    
-    pc.printf("\n\r");
-    printf("%s\n\r",data);
-    */
- 
-    // Print Card type
-    uint8_t piccType = RfChip.PICC_GetType(RfChip.uid.sak);
-    pc.printf(" \nPICC Type: %s \n\r", RfChip.PICC_GetTypeName(piccType));
-    wait_ms(1000);
-    
-    if(strcmp(data,"5C02820285024502")==0)
-    {   
-        strcat(data1,"fruits");
-    }
-    if(strcmp(data,"B3026802A002202")==0)
+    cnt = 0;
+    while(1)
     {
-        strcat(data1,"vegatables");
+        if(ntpClient.setTime(domainName[cnt],123,0x00005000) != NTP_OK)
+        {
+            pc.printf("Cannot get time information by NTP\r\n");
+            cnt++;
+        }
+        else
+            break;
+            
+        if(cnt > 3)
+        {
+            pc.printf("All NTP servers are not resposed!!\r\n");
+            return 1;
+        }
     }
-    if(strcmp(data,"F2029C02AC021F02")==0)
-    {
-        strcat(data1,"milk");
+        
+    printf("Completed Get and Set Time\r\n\r\n");
+    eth.disconnect();
     
-    MQTT::Message message;
+             sysTime = time(NULL)+(3600*5.30); //TIME with offset for eastern time Indian
+            //FORMAT TIME FOR DISPLAY AND STORE FORMATTED RESULT IN BUFFER
+            strftime(buffer,80,"%Y/%m/%d  %p %I:%M:%S \r\n",localtime(&sysTime));
+            pc.printf("Date and Time\r\n%s\r\n", buffer);
+            
+            
+     MQTT::Message message;
     char buf[100];
-    sprintf(buf, "%s", data1);
-    message.qos = MQTT::QOS0;
-    message.retained = false;
-    message.dup = false;
-    message.payload = (void*)data1;
-    message.payloadlen = strlen(data1);
-    rc = client.publish("grocery", message); 
-    client.yield(60000);
-    memset(data1, '\0',sizeof(data1)); 
-  }
+    sprintf(buf, "%s %s",c,buffer);
+     message.qos = MQTT::QOS0;
+            message.retained = false;
+            message.dup = false;
+
+            message.payload = (void*)buf;
+            message.payloadlen = strlen(buf);
+
+            rc = client.publish("RFID", message);
+            pc.printf("Rc result: %c \n ",rc);
+            client.yield(60);
+             }
 }
 }
\ No newline at end of file