Harry Keane / X_NUCLEO_GNSS1A1

Demo

Dependents:   A_TeseoLocationNEW A_TeseoLocation

README.md@0:a77f1f1f8318, 2018-11-09 (annotated)

Committer:
apalmieri
Date:
Fri Nov 09 17:06:11 2018 +0000
Revision:
0:a77f1f1f8318
Child:
1:02afb9b6f2c6
Initial commit

Who changed what in which revision?

UserRevisionLine numberNew contents of line
apalmieri 0:a77f1f1f8318 1 # Teseo-LIV3F
apalmieri 0:a77f1f1f8318 2
apalmieri 0:a77f1f1f8318 3 GPSProvider wrapper library for STMicroelectronics' X-NUCLEO-GNSS1A1 Expansion Board.
apalmieri 0:a77f1f1f8318 4
apalmieri 0:a77f1f1f8318 5 ## Overview
apalmieri 0:a77f1f1f8318 6
apalmieri 0:a77f1f1f8318 7 This is the Github repo including drivers for ST’s Teseo-LIV3F Global Navigation Satellite System (GNSS) device and middleware for the NMEA protocol support.
apalmieri 0:a77f1f1f8318 8 This firmware package implements the port of the [GPSProvider](https://github.com/apalmieriGH/GPSProvider/) to STMicroelectronics' X-NUCLEO-GNSS1A1 GNSS Expansion Board.
apalmieri 0:a77f1f1f8318 9
apalmieri 0:a77f1f1f8318 10 The key features of the package are:
apalmieri 0:a77f1f1f8318 11 * Complete software to build applications using Teseo-LIV3F GNSS device
apalmieri 0:a77f1f1f8318 12 * Middleware for the NMEA protocol support
apalmieri 0:a77f1f1f8318 13
apalmieri 0:a77f1f1f8318 14 Furthermore the package provides the following advanced features:
apalmieri 0:a77f1f1f8318 15 * Geofencing - allows the Teseo-LIV3F receiver to raise a NMEA message when the resolved GNSS position is close to or entering or exiting from a specific circle
apalmieri 0:a77f1f1f8318 16 * Odometer - provides information on the traveled distance using only the resolved GNSS position
apalmieri 0:a77f1f1f8318 17 * Data Logging - allows the Teseo-LIV3F receiver to save locally on the flash the resolved GNSS position to be retrieved on demand from the Host
apalmieri 0:a77f1f1f8318 18
apalmieri 0:a77f1f1f8318 19 ## Hardware description
apalmieri 0:a77f1f1f8318 20
apalmieri 0:a77f1f1f8318 21 The X-NUCLEO-GNSS1A1 is a Global Navigation Satellite System Expansion Board usable with the STM32 Nucleo system and other Arduino compatible platforms. It is designed around the STMicroelectronics Teseo-LIV3F GNSS receiver IC working on multiple constellations (GPS/Galileo/Glonass/BeiDou/QZSS).
apalmieri 0:a77f1f1f8318 22
apalmieri 0:a77f1f1f8318 23 The Teseo-LIV3F module is designed for top performance in a minimal space. Within its 10x10mm compact size, Teseo-LIV3F offers superior accuracy thanks to the on board 26MHz Temperature Compensated Crystal Oscillator (TCXO) and a reduced Time To First Fix (TTFF) relying to its dedicated 32KHz Real Time Clock (RTC) oscillator.
apalmieri 0:a77f1f1f8318 24
apalmieri 0:a77f1f1f8318 25 The X-NUCLEO-GNSS1A1, hosting the Teseo-LIV3F, is compatible with Arduino UNO R3 connector layout and interfaces with the MCU via the UART channel.
apalmieri 0:a77f1f1f8318 26 To connect by serial port the GNSS receiver and the host the following parameters must be used:
apalmieri 0:a77f1f1f8318 27 * 8 data bits
apalmieri 0:a77f1f1f8318 28 * No parity
apalmieri 0:a77f1f1f8318 29 * 1 stop bit
apalmieri 0:a77f1f1f8318 30 * 9600 bauds
apalmieri 0:a77f1f1f8318 31
apalmieri 0:a77f1f1f8318 32 A GPS/GLONASS/Beidou antenna, distributed along with the X-NUCLEO-GNSS1A1 Expansion Board, must be connected to the antenna connector present on the Expansion Board.
apalmieri 0:a77f1f1f8318 33 For the X-NUCLEO-GNSS1A1 proper operations, the following jumper settings must be used:
apalmieri 0:a77f1f1f8318 34 * J2 open
apalmieri 0:a77f1f1f8318 35 * J3 closed
apalmieri 0:a77f1f1f8318 36 * J4 closed
apalmieri 0:a77f1f1f8318 37 * J5 open
apalmieri 0:a77f1f1f8318 38 * J6 closed
apalmieri 0:a77f1f1f8318 39 * J7 closed
apalmieri 0:a77f1f1f8318 40 * J8 open
apalmieri 0:a77f1f1f8318 41 * J9 closed
apalmieri 0:a77f1f1f8318 42 * J10 open
apalmieri 0:a77f1f1f8318 43 * J11 closed
apalmieri 0:a77f1f1f8318 44 * J12 closed
apalmieri 0:a77f1f1f8318 45 * J13 closed
apalmieri 0:a77f1f1f8318 46 * J14 closed
apalmieri 0:a77f1f1f8318 47 * J15 closed
apalmieri 0:a77f1f1f8318 48
apalmieri 0:a77f1f1f8318 49 ## Tested platforms
apalmieri 0:a77f1f1f8318 50
apalmieri 0:a77f1f1f8318 51 This firmware has been tested on STM32 NUCLEO-F401RE
apalmieri 0:a77f1f1f8318 52
apalmieri 0:a77f1f1f8318 53 ## Example Application
apalmieri 0:a77f1f1f8318 54
apalmieri 0:a77f1f1f8318 55 To run GNSS example applications using X-NUCLEO-GNSS1A1 Expansion Board based on mbed OS and built with [mbed-cli](https://github.com/ARMmbed/mbed-cli/), please refer to [TeseoLocation](https://github.com/apalmieriGH/TeseoLocation/) page.