![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Fork with SeeedStudio Xadow GPS v2 enabled
Dependencies: FXOS8700CQ MODSERIAL XadowGPS mbed
Fork of Avnet_ATT_Cellular_IOT by
Diff: main.cpp
- Revision:
- 0:9d5134074d84
- Child:
- 1:af7a42f7d465
diff -r 000000000000 -r 9d5134074d84 main.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Fri Jul 08 23:52:38 2016 +0000 @@ -0,0 +1,273 @@ +#include "mbed.h" +#include <cctype> +#include <string> +#include "SerialBuffered.h" +#include "HTS221.h" + +// comment out the following line if color is not supported on the terminal +#define USE_COLOR +#ifdef USE_COLOR + #define BLK "\033[30m" + #define RED "\033[31m" + #define GRN "\033[32m" + #define YEL "\033[33m" + #define BLU "\033[34m" + #define MAG "\033[35m" + #define CYN "\033[36m" + #define WHT "\033[37m" + #define DEF "\033[39m" +#else + #define BLK + #define RED + #define GRN + #define YEL + #define BLU + #define MAG + #define CYN + #define WHT + #define DEF +#endif + +#define MDM_DBG_OFF 0 +#define MDM_DBG_AT_CMDS (1 << 0) +int mdm_dbgmask = MDM_DBG_OFF; + +Serial pc(USBTX, USBRX); +SerialBuffered mdm(PTD3, PTD2, 128); +DigitalOut led_red(LED_RED); +DigitalOut led_green(LED_GREEN); + +DigitalOut mdm_uart2_rx_boot_mode_sel(PTC17); // on powerup, 0 = boot mode, 1 = normal boot +DigitalOut mdm_power_on(PTB9); // 0 = turn modem on, 1 = turn modem off (should be held high for >5 seconds to cycle modem) +DigitalOut mdm_wakeup_in(PTC2); // 0 = let modem sleep, 1 = keep modem awake -- Note: pulled high on shield + +DigitalOut shield_3v3_1v8_sig_trans_ena(PTC4); // 0 = disabled (all signals high impedence, 1 = translation active +DigitalOut mdm_uart1_cts(PTD0); + +#define TOUPPER(a) (a) //toupper(a) + +const char ok_str[] = "OK"; +const char error_str[] = "ERROR"; + +#define MDM_OK 0 +#define MDM_ERR_TIMEOUT -1 + +#define MAX_AT_RSP_LEN 255 + +// +// The modem will return strings of HEX encoded data. This function takes +// a pointer to a string of HEX ASCII data and converts it into a string +// of ASCII data. It takes a pointer to the string of HEX ASCII data and +// a pointer to the destination string. It returns the number of characters +// it converted. +// +int DecodeASCIIstr(string& ins, string& outs) { + int val, n = 0; + char ts[2]; + + while(n<ins.length()) { + val = atoi((const char*)ins[n])*16+atoi((const char*)ins[n+1]); + sprintf(ts,"%c",val); + outs.append(ts); + n += 2; + } + return outs.length(); +} + + +// +// Modem expects data to be passed to it in the form of HEX encoded strings. This +// function takes a pointer to a users supplied ASCII string, and converts it into +// an ASCII string of equivelent HEX numbers encoded as a string. The function takes +// a pointer to the users input string, and a pointer to the output string. The +// function returns the number of characters converted or 0 if an error occurs or more +// than 750 characters were converted. The 750 chacter limit is because the modem +// will only accept up to 1500 characters, and the converted srings will be 2x the +// input string since the hex representation of 1 character is a two digit hex value. +// +int CreateASCIIstr(string& in, string& out) { + int i = 0; + char ts[3]; + + if( in.length() > 749 ) + return 0; + + while(in[i] != 0x00) { + sprintf(ts,"%02X", in[i]); + out.append(ts); + i++; + } + return out.length(); +} + + + +ssize_t mdm_getline(char *buff, size_t size, int timeout_ms) { + int cin = -1; + int cin_last; + + if (NULL == buff || size == 0) { + return -1; + } + + size_t len = 0; + Timer timer; + timer.start(); + while ((len < (size-1)) && (timer.read_ms() < timeout_ms)) { + if (mdm.readable()) { + cin_last = cin; + cin = mdm.getc(); + if (isprint(cin)) { + buff[len++] = (char)cin; + continue; + } else if (('\r' == cin_last) && ('\n' == cin)) { + break; + } + } + wait_ms(1); + } + buff[len] = NULL; + + return len; +} + +int mdm_sendAtCmd(const char *cmd, const char **rsp_list, int timeout_ms) { + if (cmd && strlen(cmd) > 0) { + if (mdm_dbgmask & MDM_DBG_AT_CMDS) { + printf(MAG "ATCMD: " DEF "--> " GRN "%s" DEF "\n", cmd); + } + mdm.printf("%s\r\n", cmd); + } + + if (rsp_list) { + Timer timer; + char rsp[MAX_AT_RSP_LEN+1]; + int len; + + timer.start(); + while (timer.read_ms() < timeout_ms) { + len = mdm_getline(rsp, sizeof(rsp), timeout_ms - timer.read_ms()); + + if (len < 0) + return MDM_ERR_TIMEOUT; + + if (len == 0) + continue; + + if (mdm_dbgmask & MDM_DBG_AT_CMDS) { + printf(MAG "ATRSP: " DEF "<-- " CYN "%s" DEF "\n", rsp); + } + + if (rsp_list) { + int rsp_idx = 0; + while (rsp_list[rsp_idx]) { + if (strcasecmp(rsp, rsp_list[rsp_idx]) == 0) { + return rsp_idx; + } + rsp_idx++; + } + } + } + return MDM_ERR_TIMEOUT; + } + return MDM_OK; +} + +int mdm_init(void) { + // disable signal level translator + shield_3v3_1v8_sig_trans_ena = 0; + + // power modem on //off + mdm_power_on = 0; //1; + + // insure modem boots into normal operating mode + // and does not go to sleep when powered on + mdm_uart2_rx_boot_mode_sel = 1; + mdm_wakeup_in = 1; + + // initialze comm with the modem + mdm.baud(115200); + mdm_uart1_cts = 0; + + // enable the signal level translator to start + // modem reset process (modem will be powered down) + shield_3v3_1v8_sig_trans_ena = 1; + + // Give the modem 60 secons to start responding by + // sending simple 'AT' commands to modem once per second. + Timer timer; + timer.start(); + while (timer.read() < 60) { + const char * rsp_lst[] = { ok_str, error_str, NULL }; + int rc = mdm_sendAtCmd("AT", rsp_lst, 500); + if (rc == 0) + return timer.read(); + wait_ms(1000 - (timer.read_ms() % 1000)); + pc.printf("\r%d",timer.read_ms()/1000); + } + return false; +} + +#define CTOF(x) ((x)*1.8+32) + +int main() { + HTS221 hts221; + pc.baud(115200); + int i, + CreateASCIIstr(string& in, string& out), + DecodeASCIIstr(string& ins, string& outs); + string ins, outs; + + void hts221_init(void); + + pc.printf(BLU "Hello World from AT&T Shape!\r\n"); + pc.printf(GRN "Initialize the HTS221\n\r"); + + i = hts221.begin(); + if( i ) + pc.printf(BLU "HTS221 Detected! (0x%02X)\n\r",i); + else + pc.printf(RED "HTS221 NOT DETECTED!!\n\r"); + + printf("Temp is: %0.2f F \n\r",CTOF(hts221.readTemperature())); + printf("Humid is: %02d %%\n\r",hts221.readHumidity()); + + // Initialize the modem + printf(GRN "Modem initializing... will take up to 60 seconds" DEF "\r\n"); + i=mdm_init(); + if (!i) { + pc.printf(RED "Modem initialization failed!" DEF "\n"); + while (1); + } + + // Now that the modem is up and running, transfer characters + // between the pc terminal and the modem to give the user + // a virtual terminal to the modem. + pc.printf(YEL "\rAT command interface ready, completed in %d seconds. You may now type AT commands" DEF "\r\n",i); + + while(1) { + if(pc.readable()) { + char char_in = TOUPPER(pc.getc()); + + static char last_char_in = 0; + + if (('\r' == char_in) || ('\n' == char_in)) + { + if (('\r' == char_in) || ('\r' != last_char_in)) + { + mdm.puts("\r\n"); + } + } + else + { + pc.putc(char_in); + mdm.putc(char_in); + } + last_char_in = char_in; + } + if(mdm.readable()) { + char ser_char = mdm.getc(); + pc.putc(ser_char); + } + } +}