Bill Shaw / Mbed 2 deprecated Avnet_ATT_Cellular_IOT

Fork with SeeedStudio Xadow GPS v2 enabled

Dependencies:   FXOS8700CQ MODSERIAL XadowGPS mbed

Fork of Avnet_ATT_Cellular_IOT by Avnet

Revisions of wnc_control.cpp

Revision Date Message Actions
39:1996eaec02d6 2016-07-23 Changed sockwrite to wait a long time now, for 31 seconds (something to try since the connect timeout is set to 30 seconds).; ; Corrected max length string to the 1500 WNC limit (was 99999). File  Diff  Annotate
38:564b312a719f 2016-07-23 Changed timeout for sockconn. File  Diff  Annotate
36:d4782eabff43 2016-07-23 Added printout of WNC cellular signal quality and SIM status. Tried a new approach to commanding the WNC for init. File  Diff  Annotate
34:1a4498e3580e 2016-07-22 Potential solution for missing characters at end of socket read payload. File  Diff  Annotate
32:1e052a3e73fe 2016-07-22 Removed in between character delays when talking to the WNC. File  Diff  Annotate
30:33be8e2992f3 2016-07-22 sockread returns how many read. Software init only hardware re-inits when no response, otherwise loops until software init done. Per WNC now wait 20mS between AT commands. File  Diff  Annotate
22:41e6c417ace1 2016-07-13 Added a 10mS delay to the socket read function. 10mS for the first read and then 10mS in between each retry. File  Diff  Annotate
19:f89baed3bd6f 2016-07-13 Right before the SOCKCONN during the WNC software initialization once in a while the WNC seems to be dropping a char that is sent to it, 'A' specifically. So I put in 2 "AT" commands right before the SOCKCONN and that seems to clean it up. File  Diff  Annotate
10:df54436ecd38 2016-07-11 Changed wnc control code so that it can't do a read or a write to a socket if the socket is not opened successfully. File  Diff  Annotate
2:0e2ef866af95 2016-07-10 Adding in WNC code from Fred File  Diff  Annotate