Fork with SeeedStudio Xadow GPS v2 enabled

Dependencies:   FXOS8700CQ MODSERIAL XadowGPS mbed

Fork of Avnet_ATT_Cellular_IOT by Avnet

config_me.h

Committer:
fkellermavnet
Date:
2016-07-13
Revision:
21:d0038d14ee7c
Parent:
13:df9c49662797
Child:
23:d6ceeb6d85ed

File content as of revision 21:d0038d14ee7c:

#ifndef __CONFIG_ME_H_
#define __CONFIG_ME_H_

// User must set these for own context:

// This is the server's base URL name.  Example "www.google.com"
static const char * MY_SERVER_URL       = "run-west.att.io";

// These are FLOW variables that must be read from your own FLOW account and placed here:
#define FLOW_BASE_URL                   "/1e464b19cdcde/774c88d68202/86694923d5bf28a/in/flow"
#define FLOW_INPUT_NAME                 "/climate"

// This in most cases should be left alone but is here if you want to talk a differnet protocol:
#define FLOW_URL_TYPE                   " HTTP/1.1\r\nHost: "

// This just needs to be a unique identifier 1 for each board that talks to each FLOW account. 
// If you only have one board then you can just leave this alone but you have to use this
// identifier in your FLOW setup for identification.
#define FLOW_DEVICE_NAME                "vstarterkit001"

// These are for?
#define TEMP_HUMIDITY_ONLY                      1
#define TEMP_HUMIDITY_ACCELEROMETER             2
#define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 3

// This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit:
static const char * MY_APN_STR          = "m2m.com.attz";

//This is for normal HTTP.  If you want to use TCP to a specific port, change that here:
static const char * MY_PORT_STR         = "80";

#endif