Bill Shaw / Mbed 2 deprecated Avnet_ATT_Cellular_IOT

Fork with SeeedStudio Xadow GPS v2 enabled

Dependencies:   FXOS8700CQ MODSERIAL XadowGPS mbed

Fork of Avnet_ATT_Cellular_IOT by Avnet

config_me.h@69:5a3414cc7531, 2016-08-11 (annotated)

Committer:
stefanrousseau
Date:
Thu Aug 11 04:38:02 2016 +0000
Revision:
69:5a3414cc7531
Parent:
68:6e311c747045
Child:
82:c03944a7af88
Added code for Xadow GPS.  Not done sending to Flow Designer yet.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
fkellermavnet 68:6e311c747045 1 /* ===================================================================
fkellermavnet 68:6e311c747045 2 Copyright © 2016, AVNET Inc.
fkellermavnet 68:6e311c747045 3
fkellermavnet 68:6e311c747045 4 Licensed under the Apache License, Version 2.0 (the "License");
fkellermavnet 68:6e311c747045 5 you may not use this file except in compliance with the License.
fkellermavnet 68:6e311c747045 6 You may obtain a copy of the License at
fkellermavnet 68:6e311c747045 7
fkellermavnet 68:6e311c747045 8 http://www.apache.org/licenses/LICENSE-2.0
fkellermavnet 68:6e311c747045 9
fkellermavnet 68:6e311c747045 10 Unless required by applicable law or agreed to in writing,
fkellermavnet 68:6e311c747045 11 software distributed under the License is distributed on an
fkellermavnet 68:6e311c747045 12 "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
fkellermavnet 68:6e311c747045 13 either express or implied. See the License for the specific
fkellermavnet 68:6e311c747045 14 language governing permissions and limitations under the License.
fkellermavnet 68:6e311c747045 15
fkellermavnet 68:6e311c747045 16 ======================================================================== */
fkellermavnet 68:6e311c747045 17
JMF 2:0e2ef866af95 18 #ifndef __CONFIG_ME_H_
JMF 2:0e2ef866af95 19 #define __CONFIG_ME_H_
JMF 2:0e2ef866af95 20
JMF 2:0e2ef866af95 21 // User must set these for own context:
fkellermavnet 21:d0038d14ee7c 22
fkellermavnet 50:8ac42961458c 23 #define BUF_SIZE_FOR_N_MAX_SOCKREAD (10)
fkellermavnet 50:8ac42961458c 24 #define MAX_WNC_SOCKREAD_PAYLOAD (1500)
fkellermavnet 50:8ac42961458c 25
fkellermavnet 21:d0038d14ee7c 26 // This is the server's base URL name. Example "www.google.com"
stefanrousseau 24:bd480d2aade4 27 // Note that when you Fork a FLOW, it will typically assign either
stefanrousseau 24:bd480d2aade4 28 // "run-east.att.io" or "run-west.att.io", so be sure to check this.
fkellermavnet 51:d9e5952545da 29 static const char * MY_SERVER_URL = "run-west.att.io";
fkellermavnet 21:d0038d14ee7c 30
stefanrousseau 24:bd480d2aade4 31 // These are FLOW fields from the Endpoints tab:
stefanrousseau 12:7c94ec5069dc 32 #define FLOW_BASE_URL "/1e464b19cdcde/774c88d68202/86694923d5bf28a/in/flow"
stefanrousseau 12:7c94ec5069dc 33 #define FLOW_INPUT_NAME "/climate"
fkellermavnet 21:d0038d14ee7c 34
stefanrousseau 24:bd480d2aade4 35 // Unless you want to use a different protocol, this field should be left as is:
stefanrousseau 12:7c94ec5069dc 36 #define FLOW_URL_TYPE " HTTP/1.1\r\nHost: "
stefanrousseau 12:7c94ec5069dc 37
stefanrousseau 24:bd480d2aade4 38 // This identifier specifies with which FLOW device you are communicating.
stefanrousseau 24:bd480d2aade4 39 // If you only have one devive there then you can just leave this as is.
stefanrousseau 24:bd480d2aade4 40 // Once your FLOW device has been initialized (Virtual Device Initialize clicked),
stefanrousseau 24:bd480d2aade4 41 // the Virtual Device will show up in M2X. This is its "DEVICE SERIAL" field
fkellermavnet 21:d0038d14ee7c 42 #define FLOW_DEVICE_NAME "vstarterkit001"
fkellermavnet 21:d0038d14ee7c 43
stefanrousseau 24:bd480d2aade4 44 // This constant defines how often sensors are read and sent up to FLOW
stefanrousseau 24:bd480d2aade4 45 #define SENSOR_UPDATE_INTERVAL_MS 5000; //5 seconds
stefanrousseau 24:bd480d2aade4 46
stefanrousseau 24:bd480d2aade4 47 // Specify here how many sensor parameters you want reported to FLOW.
stefanrousseau 24:bd480d2aade4 48 // You can use only the temperature and humidity from the shield HTS221
stefanrousseau 24:bd480d2aade4 49 // or you can add the reading of the FXO8700CQ motion sensor on the FRDM-K64F board
stefanrousseau 24:bd480d2aade4 50 // or if you have a SiLabs PMOD plugged into the shield, you can add its proximity sensor,
stefanrousseau 24:bd480d2aade4 51 // UV light, visible ambient light and infrared ambient light readings
stefanrousseau 55:3abf9e3f42e6 52 // If you run the Windows "Sensor Simulator" utility, 8 additional virtual
stefanrousseau 55:3abf9e3f42e6 53 // sensors can also be made available via USB.
stefanrousseau 55:3abf9e3f42e6 54 #define TEMP_HUMIDITY_ONLY 1
stefanrousseau 55:3abf9e3f42e6 55 #define TEMP_HUMIDITY_ACCELEROMETER 2
stefanrousseau 69:5a3414cc7531 56 #define TEMP_HUMIDITY_ACCELEROMETER_GPS 3
stefanrousseau 69:5a3414cc7531 57 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 4
stefanrousseau 69:5a3414cc7531 58 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS_VIRTUALSENSORS 5
stefanrousseau 58:c417fbc39c22 59 static int iSensorsToReport = TEMP_HUMIDITY_ACCELEROMETER; //modify this to change your selection
stefanrousseau 12:7c94ec5069dc 60
fkellermavnet 21:d0038d14ee7c 61 // This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit:
stefanrousseau 12:7c94ec5069dc 62 static const char * MY_APN_STR = "m2m.com.attz";
fkellermavnet 21:d0038d14ee7c 63
fkellermavnet 21:d0038d14ee7c 64 //This is for normal HTTP. If you want to use TCP to a specific port, change that here:
fkellermavnet 21:d0038d14ee7c 65 static const char * MY_PORT_STR = "80";
JMF 2:0e2ef866af95 66
JMF 2:0e2ef866af95 67 #endif