Gregory Cristian / SX1276Lib

Driver for the SX1276 RF Transceiver

Dependents:   LoRaWAN_actility LoRaWAN_MBED LoRaWANSharedTest

sx1276/sx1276-hal.cpp@4:f0ce52e94d3f, 2014-08-20 (annotated)

Committer:
GregCr
Date:
Wed Aug 20 06:29:01 2014 +0000
Revision:
4:f0ce52e94d3f
Parent:
3:ca84be1f3fac
Child:
5:11ec8a6ba4f0
Removed use of LED1 which is causing issues with the SPI on the Nucleo board. Clean up

Who changed what in which revision?

UserRevisionLine numberNew contents of line
GregCr 0:e6ceb13d2d05 1 /*
GregCr 0:e6ceb13d2d05 2 / _____) _ | |
GregCr 0:e6ceb13d2d05 3 ( (____ _____ ____ _| |_ _____ ____| |__
GregCr 0:e6ceb13d2d05 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
GregCr 0:e6ceb13d2d05 5 _____) ) ____| | | || |_| ____( (___| | | |
GregCr 0:e6ceb13d2d05 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
GregCr 0:e6ceb13d2d05 7 ( C )2014 Semtech
GregCr 0:e6ceb13d2d05 8
GregCr 0:e6ceb13d2d05 9 Description: -
GregCr 0:e6ceb13d2d05 10
GregCr 0:e6ceb13d2d05 11 License: Revised BSD License, see LICENSE.TXT file include in the project
GregCr 0:e6ceb13d2d05 12
GregCr 0:e6ceb13d2d05 13 Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
GregCr 0:e6ceb13d2d05 14 */
GregCr 0:e6ceb13d2d05 15 #include "sx1276-hal.h"
GregCr 0:e6ceb13d2d05 16
GregCr 0:e6ceb13d2d05 17 const RadioRegisters_t SX1276MB1xAS::RadioRegsInit[] =
GregCr 0:e6ceb13d2d05 18 {
GregCr 0:e6ceb13d2d05 19 { MODEM_FSK , REG_LNA , 0x23 },
GregCr 0:e6ceb13d2d05 20 { MODEM_FSK , REG_RXCONFIG , 0x1E },
GregCr 0:e6ceb13d2d05 21 { MODEM_FSK , REG_RSSICONFIG , 0xD2 },
GregCr 0:e6ceb13d2d05 22 { MODEM_FSK , REG_PREAMBLEDETECT , 0xAA },
GregCr 0:e6ceb13d2d05 23 { MODEM_FSK , REG_OSC , 0x07 },
GregCr 0:e6ceb13d2d05 24 { MODEM_FSK , REG_SYNCCONFIG , 0x12 },
GregCr 0:e6ceb13d2d05 25 { MODEM_FSK , REG_SYNCVALUE1 , 0xC1 },
GregCr 0:e6ceb13d2d05 26 { MODEM_FSK , REG_SYNCVALUE2 , 0x94 },
GregCr 0:e6ceb13d2d05 27 { MODEM_FSK , REG_SYNCVALUE3 , 0xC1 },
GregCr 0:e6ceb13d2d05 28 { MODEM_FSK , REG_PACKETCONFIG1 , 0xD8 },
GregCr 0:e6ceb13d2d05 29 { MODEM_FSK , REG_FIFOTHRESH , 0x8F },
GregCr 0:e6ceb13d2d05 30 { MODEM_FSK , REG_IMAGECAL , 0x02 },
GregCr 0:e6ceb13d2d05 31 { MODEM_FSK , REG_DIOMAPPING1 , 0x00 },
GregCr 0:e6ceb13d2d05 32 { MODEM_FSK , REG_DIOMAPPING2 , 0x30 },
GregCr 0:e6ceb13d2d05 33 { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },
GregCr 0:e6ceb13d2d05 34 };
GregCr 0:e6ceb13d2d05 35
GregCr 0:e6ceb13d2d05 36 SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ),
GregCr 0:e6ceb13d2d05 37 PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
GregCr 0:e6ceb13d2d05 38 PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
GregCr 0:e6ceb13d2d05 39 PinName antSwitch )
GregCr 0:e6ceb13d2d05 40 : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5),
GregCr 0:e6ceb13d2d05 41 antSwitch( antSwitch ),
GregCr 0:e6ceb13d2d05 42 #if( defined ( TARGET_KL25Z ) || defined ( TARGET_LPC11U6X ) )
GregCr 0:e6ceb13d2d05 43 fake( A3 )
GregCr 0:e6ceb13d2d05 44 #elif defined ( TARGET_NUCLEO_L152RE )
GregCr 0:e6ceb13d2d05 45 fake( D8 )
GregCr 0:e6ceb13d2d05 46 #else
GregCr 0:e6ceb13d2d05 47 #warning "Check availability of IRQs on your selected board"
GregCr 0:e6ceb13d2d05 48 #endif
GregCr 0:e6ceb13d2d05 49 {
GregCr 0:e6ceb13d2d05 50 Reset( );
GregCr 0:e6ceb13d2d05 51
GregCr 0:e6ceb13d2d05 52 RxChainCalibration( );
GregCr 0:e6ceb13d2d05 53
GregCr 0:e6ceb13d2d05 54 IoInit( );
GregCr 0:e6ceb13d2d05 55
GregCr 0:e6ceb13d2d05 56 SetOpMode( RF_OPMODE_SLEEP );
GregCr 0:e6ceb13d2d05 57
GregCr 0:e6ceb13d2d05 58 IoIrqInit( dioIrq );
GregCr 0:e6ceb13d2d05 59
GregCr 0:e6ceb13d2d05 60 RadioRegistersInit( );
GregCr 0:e6ceb13d2d05 61
GregCr 0:e6ceb13d2d05 62 SetModem( MODEM_FSK );
GregCr 0:e6ceb13d2d05 63
GregCr 0:e6ceb13d2d05 64 this->settings.State = IDLE ;
GregCr 0:e6ceb13d2d05 65 }
GregCr 0:e6ceb13d2d05 66
GregCr 0:e6ceb13d2d05 67 SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ) )
GregCr 0:e6ceb13d2d05 68 #if( defined ( TARGET_KL25Z ) || defined ( TARGET_LPC11U6X ) )
GregCr 0:e6ceb13d2d05 69 : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
GregCr 0:e6ceb13d2d05 70 antSwitch( A4 ),
GregCr 0:e6ceb13d2d05 71 fake( A3 )
GregCr 0:e6ceb13d2d05 72 #elif defined ( TARGET_NUCLEO_L152RE )
GregCr 0:e6ceb13d2d05 73 : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
GregCr 0:e6ceb13d2d05 74 antSwitch( A4 ),
GregCr 0:e6ceb13d2d05 75 fake( D8 )
GregCr 0:e6ceb13d2d05 76 #else
GregCr 0:e6ceb13d2d05 77 #warning "Check availability of IRQs on your selected board"
GregCr 0:e6ceb13d2d05 78 #endif
GregCr 0:e6ceb13d2d05 79 {
GregCr 0:e6ceb13d2d05 80 Reset( );
GregCr 0:e6ceb13d2d05 81
GregCr 1:f979673946c0 82 DetectBoardType( );
GregCr 1:f979673946c0 83
GregCr 0:e6ceb13d2d05 84 RxChainCalibration( );
GregCr 0:e6ceb13d2d05 85
GregCr 0:e6ceb13d2d05 86 IoInit( );
GregCr 0:e6ceb13d2d05 87
GregCr 0:e6ceb13d2d05 88 SetOpMode( RF_OPMODE_SLEEP );
GregCr 0:e6ceb13d2d05 89 IoIrqInit( dioIrq );
GregCr 0:e6ceb13d2d05 90
GregCr 0:e6ceb13d2d05 91 RadioRegistersInit( );
GregCr 0:e6ceb13d2d05 92
GregCr 0:e6ceb13d2d05 93 SetModem( MODEM_FSK );
GregCr 0:e6ceb13d2d05 94
GregCr 0:e6ceb13d2d05 95 this->settings.State = IDLE ;
GregCr 0:e6ceb13d2d05 96 }
GregCr 0:e6ceb13d2d05 97
GregCr 0:e6ceb13d2d05 98 //-------------------------------------------------------------------------
GregCr 0:e6ceb13d2d05 99 // Board relative functions
GregCr 0:e6ceb13d2d05 100 //-------------------------------------------------------------------------
GregCr 2:5eb3066446dd 101 uint8_t SX1276MB1xAS::DetectBoardType( void )
GregCr 1:f979673946c0 102 {
GregCr 1:f979673946c0 103 antSwitch.input( );
GregCr 4:f0ce52e94d3f 104 wait_ms( 1 );
GregCr 1:f979673946c0 105 if( antSwitch == 1 )
GregCr 1:f979673946c0 106 {
GregCr 2:5eb3066446dd 107 boardConnected = SX1276MB1LAS;
GregCr 1:f979673946c0 108 }
GregCr 1:f979673946c0 109 else
GregCr 1:f979673946c0 110 {
GregCr 2:5eb3066446dd 111 boardConnected = SX1276MB1MAS;
GregCr 1:f979673946c0 112 }
GregCr 1:f979673946c0 113 antSwitch.output( );
GregCr 4:f0ce52e94d3f 114 wait_ms( 1 );
GregCr 2:5eb3066446dd 115
GregCr 2:5eb3066446dd 116 return ( boardConnected );
GregCr 1:f979673946c0 117 }
GregCr 0:e6ceb13d2d05 118
GregCr 0:e6ceb13d2d05 119 void SX1276MB1xAS::IoInit( void )
GregCr 0:e6ceb13d2d05 120 {
GregCr 0:e6ceb13d2d05 121 AntSwInit( );
GregCr 0:e6ceb13d2d05 122 SpiInit( );
GregCr 0:e6ceb13d2d05 123 }
GregCr 0:e6ceb13d2d05 124
GregCr 0:e6ceb13d2d05 125 void SX1276MB1xAS::RadioRegistersInit( ){
GregCr 0:e6ceb13d2d05 126 uint8_t i = 0;
GregCr 0:e6ceb13d2d05 127 for( i = 0; i < sizeof( RadioRegsInit ) / sizeof( RadioRegisters_t ); i++ )
GregCr 0:e6ceb13d2d05 128 {
GregCr 0:e6ceb13d2d05 129 SetModem( RadioRegsInit[i].Modem );
GregCr 0:e6ceb13d2d05 130 Write( RadioRegsInit[i].Addr, RadioRegsInit[i].Value );
GregCr 0:e6ceb13d2d05 131 }
GregCr 0:e6ceb13d2d05 132 }
GregCr 0:e6ceb13d2d05 133
GregCr 0:e6ceb13d2d05 134 void SX1276MB1xAS::SpiInit( void )
GregCr 0:e6ceb13d2d05 135 {
GregCr 0:e6ceb13d2d05 136 nss = 1;
GregCr 0:e6ceb13d2d05 137 spi.format( 8,0 );
GregCr 0:e6ceb13d2d05 138 uint32_t frequencyToSet = 8000000;
GregCr 0:e6ceb13d2d05 139 #if( defined ( TARGET_NUCLEO_L152RE ) || defined ( TARGET_LPC11U6X ) )
GregCr 0:e6ceb13d2d05 140 spi.frequency( frequencyToSet );
GregCr 0:e6ceb13d2d05 141 #elif( defined ( TARGET_KL25Z ) ) //busclock frequency is halved -> double the spi frequency to compensate
GregCr 0:e6ceb13d2d05 142 spi.frequency( frequencyToSet * 2 );
GregCr 0:e6ceb13d2d05 143 #else
GregCr 0:e6ceb13d2d05 144 #warning "Check the board's SPI frequency"
GregCr 0:e6ceb13d2d05 145 #endif
GregCr 0:e6ceb13d2d05 146 wait(0.1);
GregCr 0:e6ceb13d2d05 147 }
GregCr 0:e6ceb13d2d05 148
GregCr 0:e6ceb13d2d05 149 void SX1276MB1xAS::IoIrqInit( DioIrqHandler *irqHandlers )
GregCr 0:e6ceb13d2d05 150 {
GregCr 0:e6ceb13d2d05 151 #if( defined ( TARGET_NUCLEO_L152RE ) || defined ( TARGET_LPC11U6X ) )
GregCr 0:e6ceb13d2d05 152 dio0.mode(PullDown);
GregCr 0:e6ceb13d2d05 153 dio1.mode(PullDown);
GregCr 0:e6ceb13d2d05 154 dio2.mode(PullDown);
GregCr 0:e6ceb13d2d05 155 dio3.mode(PullDown);
GregCr 0:e6ceb13d2d05 156 dio4.mode(PullDown);
GregCr 0:e6ceb13d2d05 157 #endif
GregCr 0:e6ceb13d2d05 158 dio0.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[0] ) );
GregCr 0:e6ceb13d2d05 159 dio1.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[1] ) );
GregCr 0:e6ceb13d2d05 160 dio2.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[2] ) );
GregCr 0:e6ceb13d2d05 161 dio3.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[3] ) );
GregCr 0:e6ceb13d2d05 162 dio4.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[4] ) );
GregCr 0:e6ceb13d2d05 163 }
GregCr 0:e6ceb13d2d05 164
GregCr 0:e6ceb13d2d05 165 void SX1276MB1xAS::IoDeInit( void )
GregCr 0:e6ceb13d2d05 166 {
GregCr 0:e6ceb13d2d05 167 //nothing
GregCr 0:e6ceb13d2d05 168 }
GregCr 0:e6ceb13d2d05 169
GregCr 0:e6ceb13d2d05 170 uint8_t SX1276MB1xAS::GetPaSelect( uint32_t channel )
GregCr 0:e6ceb13d2d05 171 {
GregCr 0:e6ceb13d2d05 172 if( channel > RF_MID_BAND_THRESH )
GregCr 0:e6ceb13d2d05 173 {
GregCr 3:ca84be1f3fac 174 if( boardConnected == SX1276MB1LAS )
GregCr 1:f979673946c0 175 {
GregCr 1:f979673946c0 176 return RF_PACONFIG_PASELECT_PABOOST;
GregCr 1:f979673946c0 177 }
GregCr 1:f979673946c0 178 else
GregCr 1:f979673946c0 179 {
GregCr 1:f979673946c0 180 return RF_PACONFIG_PASELECT_RFO;
GregCr 1:f979673946c0 181 }
GregCr 0:e6ceb13d2d05 182 }
GregCr 0:e6ceb13d2d05 183 else
GregCr 0:e6ceb13d2d05 184 {
GregCr 0:e6ceb13d2d05 185 return RF_PACONFIG_PASELECT_RFO;
GregCr 0:e6ceb13d2d05 186 }
GregCr 0:e6ceb13d2d05 187 }
GregCr 0:e6ceb13d2d05 188
GregCr 0:e6ceb13d2d05 189 void SX1276MB1xAS::SetAntSwLowPower( bool status )
GregCr 0:e6ceb13d2d05 190 {
GregCr 0:e6ceb13d2d05 191 if( isRadioActive != status )
GregCr 0:e6ceb13d2d05 192 {
GregCr 0:e6ceb13d2d05 193 isRadioActive = status;
GregCr 0:e6ceb13d2d05 194
GregCr 0:e6ceb13d2d05 195 if( status == false )
GregCr 0:e6ceb13d2d05 196 {
GregCr 0:e6ceb13d2d05 197 AntSwInit( );
GregCr 0:e6ceb13d2d05 198 }
GregCr 0:e6ceb13d2d05 199 else
GregCr 0:e6ceb13d2d05 200 {
GregCr 0:e6ceb13d2d05 201 AntSwDeInit( );
GregCr 0:e6ceb13d2d05 202 }
GregCr 0:e6ceb13d2d05 203 }
GregCr 0:e6ceb13d2d05 204 }
GregCr 0:e6ceb13d2d05 205
GregCr 0:e6ceb13d2d05 206 void SX1276MB1xAS::AntSwInit( void )
GregCr 0:e6ceb13d2d05 207 {
GregCr 0:e6ceb13d2d05 208 antSwitch = 0;
GregCr 0:e6ceb13d2d05 209 }
GregCr 0:e6ceb13d2d05 210
GregCr 0:e6ceb13d2d05 211 void SX1276MB1xAS::AntSwDeInit( void )
GregCr 0:e6ceb13d2d05 212 {
GregCr 0:e6ceb13d2d05 213 antSwitch = 0;
GregCr 0:e6ceb13d2d05 214 }
GregCr 0:e6ceb13d2d05 215
GregCr 0:e6ceb13d2d05 216 void SX1276MB1xAS::SetAntSw( uint8_t rxTx )
GregCr 0:e6ceb13d2d05 217 {
GregCr 0:e6ceb13d2d05 218 if( this->rxTx == rxTx )
GregCr 0:e6ceb13d2d05 219 {
GregCr 0:e6ceb13d2d05 220 //no need to go further
GregCr 0:e6ceb13d2d05 221 return;
GregCr 0:e6ceb13d2d05 222 }
GregCr 0:e6ceb13d2d05 223
GregCr 0:e6ceb13d2d05 224 this->rxTx = rxTx;
GregCr 0:e6ceb13d2d05 225
GregCr 0:e6ceb13d2d05 226 if( rxTx != 0 )
GregCr 0:e6ceb13d2d05 227 {
GregCr 0:e6ceb13d2d05 228 antSwitch = 1;
GregCr 0:e6ceb13d2d05 229 }
GregCr 0:e6ceb13d2d05 230 else
GregCr 0:e6ceb13d2d05 231 {
GregCr 0:e6ceb13d2d05 232 antSwitch = 0;
GregCr 0:e6ceb13d2d05 233 }
GregCr 0:e6ceb13d2d05 234 }
GregCr 0:e6ceb13d2d05 235
GregCr 0:e6ceb13d2d05 236 bool SX1276MB1xAS::CheckRfFrequency( uint32_t frequency )
GregCr 0:e6ceb13d2d05 237 {
GregCr 0:e6ceb13d2d05 238 //TODO: Implement check, currently all frequencies are supported
GregCr 0:e6ceb13d2d05 239 return true;
GregCr 0:e6ceb13d2d05 240 }
GregCr 0:e6ceb13d2d05 241
GregCr 0:e6ceb13d2d05 242
GregCr 0:e6ceb13d2d05 243 void SX1276MB1xAS::Reset( void )
GregCr 0:e6ceb13d2d05 244 {
GregCr 4:f0ce52e94d3f 245 reset.output();
GregCr 0:e6ceb13d2d05 246 reset = 0;
GregCr 0:e6ceb13d2d05 247 wait_ms( 1 );
GregCr 4:f0ce52e94d3f 248 reset.input();
GregCr 0:e6ceb13d2d05 249 wait_ms( 6 );
GregCr 0:e6ceb13d2d05 250 }
GregCr 0:e6ceb13d2d05 251
GregCr 0:e6ceb13d2d05 252 void SX1276MB1xAS::Write( uint8_t addr, uint8_t data )
GregCr 0:e6ceb13d2d05 253 {
GregCr 0:e6ceb13d2d05 254 Write( addr, &data, 1 );
GregCr 0:e6ceb13d2d05 255 }
GregCr 0:e6ceb13d2d05 256
GregCr 0:e6ceb13d2d05 257 uint8_t SX1276MB1xAS::Read( uint8_t addr )
GregCr 0:e6ceb13d2d05 258 {
GregCr 0:e6ceb13d2d05 259 uint8_t data;
GregCr 0:e6ceb13d2d05 260 Read( addr, &data, 1 );
GregCr 0:e6ceb13d2d05 261 return data;
GregCr 0:e6ceb13d2d05 262 }
GregCr 0:e6ceb13d2d05 263
GregCr 0:e6ceb13d2d05 264 void SX1276MB1xAS::Write( uint8_t addr, uint8_t *buffer, uint8_t size )
GregCr 0:e6ceb13d2d05 265 {
GregCr 0:e6ceb13d2d05 266 uint8_t i;
GregCr 0:e6ceb13d2d05 267
GregCr 0:e6ceb13d2d05 268 nss = 0;
GregCr 0:e6ceb13d2d05 269 spi.write( addr | 0x80 );
GregCr 0:e6ceb13d2d05 270 for( i = 0; i < size; i++ )
GregCr 0:e6ceb13d2d05 271 {
GregCr 0:e6ceb13d2d05 272 spi.write( buffer[i] );
GregCr 0:e6ceb13d2d05 273 }
GregCr 0:e6ceb13d2d05 274 nss = 1;
GregCr 0:e6ceb13d2d05 275 }
GregCr 0:e6ceb13d2d05 276
GregCr 0:e6ceb13d2d05 277 void SX1276MB1xAS::Read( uint8_t addr, uint8_t *buffer, uint8_t size )
GregCr 0:e6ceb13d2d05 278 {
GregCr 0:e6ceb13d2d05 279 uint8_t i;
GregCr 0:e6ceb13d2d05 280
GregCr 0:e6ceb13d2d05 281 nss = 0;
GregCr 0:e6ceb13d2d05 282 spi.write( addr & 0x7F );
GregCr 0:e6ceb13d2d05 283 for( i = 0; i < size; i++ )
GregCr 0:e6ceb13d2d05 284 {
GregCr 0:e6ceb13d2d05 285 buffer[i] = spi.write( 0 );
GregCr 0:e6ceb13d2d05 286 }
GregCr 0:e6ceb13d2d05 287 nss = 1;
GregCr 0:e6ceb13d2d05 288 }
GregCr 0:e6ceb13d2d05 289
GregCr 0:e6ceb13d2d05 290 void SX1276MB1xAS::WriteFifo( uint8_t *buffer, uint8_t size )
GregCr 0:e6ceb13d2d05 291 {
GregCr 0:e6ceb13d2d05 292 Write( 0, buffer, size );
GregCr 0:e6ceb13d2d05 293 }
GregCr 0:e6ceb13d2d05 294
GregCr 0:e6ceb13d2d05 295 void SX1276MB1xAS::ReadFifo( uint8_t *buffer, uint8_t size )
GregCr 0:e6ceb13d2d05 296 {
GregCr 0:e6ceb13d2d05 297 Read( 0, buffer, size );
GregCr 0:e6ceb13d2d05 298 }