![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Plant Monitoring Project
Dependencies: mbed SHT21_ncleee WakeUp SSD1306 DHT Adafruit_TCS34725 DS1820
main.cpp
- Committer:
- Germaint
- Date:
- 2020-01-07
- Revision:
- 34:fb1b9c5e5cf3
- Parent:
- 33:b576ea9bf0e3
- Child:
- 35:d87c1391706a
File content as of revision 34:fb1b9c5e5cf3:
#include "main.hh" int main(){ #ifdef DEEPSLEEP WakeUp::calibrate(); #endif #ifdef INTERRUPTEUR interrupteur = 1; #endif #ifdef OLED bouton.rise(interruption_bouton); initOLED(); #endif while(1) { if(flag_readData) readData(); flag_readData = true; #ifndef DEEPSLEEP wait(DUREE_OFF); #endif #ifdef DEEPSLEEP if(oled_on){ wait(DUREE_ECRAN_ON); turnOffScreen(); flag_readData = false; } else{ WakeUp::set(DUREE_OFF); deepsleep(); } #endif } } #ifdef AIR_PARAMETERS_DHT22 void air_temp_hum(){ int err; wait(1); do{ err = dht_sensor.readData(); wait(1); }while(err != 0); temperature_air = dht_sensor.ReadTemperature(CELCIUS); humidity_air = dht_sensor.ReadHumidity(); } #endif #ifdef FLOOR_TEMPERATURE void temp_sol() { int result = 0; ds1820.begin(); ds1820.startConversion(); // start temperature conversion from analog to digital wait(1.0); // let DS1820 complete the temperature conversion result = ds1820.read(temperature_sol); // read temperature from DS1820 and perform cyclic redundancy check (CRC) #ifdef DEBUG switch (result) { case 0: // no errors -> 'temp' contains the value of measured temperature pc.printf("temp = %3.1f C\r\n", temperature_sol); break; case 1: // no sensor present -> 'temp' is not updated pc.printf("no sensor present\n\r"); break; case 2: // CRC error -> 'temp' is not updated pc.printf("CRC error\r\n"); } #endif } #endif #ifdef FLOOR_HUMIDITY int fct_humidity_sol(void) { float val_min = 0.377; float val_max = 0.772; float mesure, mesure_etalonnee; mesure = capteur_humidity_sol.read(); mesure_etalonnee = (1-((mesure - val_min)/(val_max - val_min)))*100; #ifdef DEBUG pc.printf("hum sol: %d\n\r", (int) mesure_etalonnee); #endif return (int) mesure_etalonnee; } #endif #ifdef RGB void fct_RGB(void) { int somme; uint16_t clear, red, green, blue; if (!RGBsens.begin()) { #ifdef DEBUG pc.printf("No TCS34725 found ... check your connections"); #endif //while (1); // halt! } RGBsens.getRawData(&red, &green, &blue, &clear); somme = red + green + blue; pr = red*100/somme; pg = green*100/somme; pb = blue*100/somme; lum = (unsigned short) RGBsens.calculateLux(red, green, blue); #ifdef DEBUG pc.printf("luminosite : %d \n\r", lum); pc.printf("rouge:%d vert:%d bleu:%d \n\r", pr, pg, pb); #endif } #endif #ifdef SIGFOX void sendDataSigfox(void){ #ifdef DEBUG pc.printf("Sending Data to Sigfox \n\r"); #endif short tempSol_short, tempAir_short; tempSol_short = (short)(temperature_sol*10); tempAir_short = (short)(temperature_air*10); wisol.printf("AT$SF=%04x%02x%04x%02x%04x%02x%02x%02x%02x\r\n",tempSol_short, humidity_sol, tempAir_short, humidity_air, lum, pr, pg, pb, vBat); } #endif #ifdef OLED void oledData(void){ #ifdef DEBUG pc.printf("Displaying Data\r\n"); #endif if(!oled_on){ oled.wake(); oled.clear(); oled_on = 1; } oled.clear(); oled.printf("AIR T : %.1f", temperature_air); oled.printf("\n\r"); oled.printf("AIR H : %d", humidity_air); oled.printf("\n\r\n\r"); oled.printf("FLOOR T : %.1f", temperature_sol); oled.printf("\n\r"); oled.printf("FLOOR H : %d", humidity_sol); oled.printf("\n\r\n\r"); oled.printf("Light : %d", lum); oled.printf("\n\r"); oled.printf("R %d G %d B %d", pr, pg, pb); oled.update(); } #endif void readData(void){ #ifdef INTERRUPTEUR interrupteur = 1; wait_ms(100); RGBsens.begin(); wait_ms(100); #endif #ifdef DEBUG pc.printf("Reading Data\n\r"); #endif #ifdef FLOOR_TEMPERATURE temp_sol(); #endif #ifdef FLOOR_HUMIDITY humidity_sol = fct_humidity_sol(); #endif #ifdef AIR_PARAMETERS_DHT22 air_temp_hum(); #endif #ifdef DEBUG printf("hum air: %d\n\r", humidity_air); printf("temp air: %.1f\n\r", temperature_air); #endif #ifdef RGB fct_RGB(); #endif #ifdef SIGFOX sendDataSigfox(); #endif #ifdef OLED if(oled_on) oledData(); #endif #ifdef BATTERY_LVL readBatteryLvl(); #endif #ifdef INTERRUPTEUR wait(8); // Il faut du temps au module SigFox pour envoyer les données interrupteur = 0; #endif } void interruption_bouton(){ bouton.disable_irq(); #ifdef DEBUG pc.printf("Button interrupt\r\n"); #endif #ifdef OLED if(!oled_on){ oledData(); } #endif bouton.enable_irq(); } #ifdef OLED void turnOffScreen(void){ #ifdef DEBUG pc.printf("Turning off screen \n\r"); #endif oled_on = 0; oled.sleep(); } #endif #ifdef OLED void initOLED(void){ oled.on(); oled.initialise(); oled.clear(); oled.set_contrast(255); oled.set_font(bold_font, 8); oled.printf("================"); oled.printf("\n\r"); oled.printf(" 2PA2S"); oled.printf("\n\r\n\r"); oled.printf("FRAYSSE GERMAIN"); oled.printf("\n\r\n\r"); oled.printf(" DUPLESSIS"); oled.printf("\n\r"); oled.printf("================"); oled.update(); wait(10); oled.clear(); oled.update(); oled.sleep(); } #endif void readBatteryLvl(void){ float calcVbat = 0; int batIn = 0; float ain = battery.read(); batIn = 100*ain; calcVbat = ((float)(batIn - BATTERIE_MIN)/(float)(BATTERIE_MAX - BATTERIE_MIN))*100; vBat = calcVbat; #ifdef DEBUG pc.printf("batIn = %d\n\r", batIn); pc.printf("calcVbat = %d\n\r", calcVbat); pc.printf("vBat = %d\n\r", vBat); #endif }