Timo de Vries
remove two lines to prevent crash during compile for the mbed frdm k64f
Fork of
lwip-eth
by 
mbed official
arch/lpc17xx_emac.h@5:698d868a5285, 2013-05-30 (annotated)
- Committer:
- emilmont
- Date:
- Thu May 30 17:15:45 2013 +0100
- Revision:
- 5:698d868a5285
- Parent:
- 1:0c9d93e2f51c
Add LPC4088 target
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| emilmont | 1:0c9d93e2f51c | 1 | /********************************************************************** |
| emilmont | 1:0c9d93e2f51c | 2 | * $Id$ lpc17xx_emac.h 2010-05-21 |
| emilmont | 1:0c9d93e2f51c | 3 | *//** |
| emilmont | 1:0c9d93e2f51c | 4 | * @file lpc17xx_emac.h |
| emilmont | 1:0c9d93e2f51c | 5 | * @brief Contains all macro definitions and function prototypes |
| emilmont | 1:0c9d93e2f51c | 6 | * support for Ethernet MAC firmware library on LPC17xx |
| emilmont | 1:0c9d93e2f51c | 7 | * @version 2.0 |
| emilmont | 1:0c9d93e2f51c | 8 | * @date 21. May. 2010 |
| emilmont | 1:0c9d93e2f51c | 9 | * @author NXP MCU SW Application Team |
| emilmont | 1:0c9d93e2f51c | 10 | * |
| emilmont | 1:0c9d93e2f51c | 11 | * Copyright(C) 2010, NXP Semiconductor |
| emilmont | 1:0c9d93e2f51c | 12 | * All rights reserved. |
| emilmont | 1:0c9d93e2f51c | 13 | * |
| emilmont | 1:0c9d93e2f51c | 14 | *********************************************************************** |
| emilmont | 1:0c9d93e2f51c | 15 | * Software that is described herein is for illustrative purposes only |
| emilmont | 1:0c9d93e2f51c | 16 | * which provides customers with programming information regarding the |
| emilmont | 1:0c9d93e2f51c | 17 | * products. This software is supplied "AS IS" without any warranties. |
| emilmont | 1:0c9d93e2f51c | 18 | * NXP Semiconductors assumes no responsibility or liability for the |
| emilmont | 1:0c9d93e2f51c | 19 | * use of the software, conveys no license or title under any patent, |
| emilmont | 1:0c9d93e2f51c | 20 | * copyright, or mask work right to the product. NXP Semiconductors |
| emilmont | 1:0c9d93e2f51c | 21 | * reserves the right to make changes in the software without |
| emilmont | 1:0c9d93e2f51c | 22 | * notification. NXP Semiconductors also make no representation or |
| emilmont | 1:0c9d93e2f51c | 23 | * warranty that such application will be suitable for the specified |
| emilmont | 1:0c9d93e2f51c | 24 | * use without further testing or modification. |
| emilmont | 1:0c9d93e2f51c | 25 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 26 | |
| emilmont | 1:0c9d93e2f51c | 27 | /* Peripheral group ----------------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 28 | /** @defgroup EMAC EMAC (Ethernet Media Access Controller) |
| emilmont | 1:0c9d93e2f51c | 29 | * @ingroup LPC1700CMSIS_FwLib_Drivers |
| emilmont | 1:0c9d93e2f51c | 30 | * @{ |
| emilmont | 1:0c9d93e2f51c | 31 | */ |
| emilmont | 1:0c9d93e2f51c | 32 | |
| emilmont | 1:0c9d93e2f51c | 33 | #ifndef LPC17XX_EMAC_H_ |
| emilmont | 1:0c9d93e2f51c | 34 | #define LPC17XX_EMAC_H_ |
| emilmont | 1:0c9d93e2f51c | 35 | |
| emilmont | 1:0c9d93e2f51c | 36 | /* Includes ------------------------------------------------------------------- */ |
| emilmont | 5:698d868a5285 | 37 | #include "cmsis.h" |
| emilmont | 1:0c9d93e2f51c | 38 | |
| emilmont | 1:0c9d93e2f51c | 39 | #ifdef __cplusplus |
| emilmont | 1:0c9d93e2f51c | 40 | extern "C" |
| emilmont | 1:0c9d93e2f51c | 41 | { |
| emilmont | 1:0c9d93e2f51c | 42 | #endif |
| emilmont | 1:0c9d93e2f51c | 43 | |
| emilmont | 1:0c9d93e2f51c | 44 | #define MCB_LPC_1768 |
| emilmont | 1:0c9d93e2f51c | 45 | //#define IAR_LPC_1768 |
| emilmont | 1:0c9d93e2f51c | 46 | |
| emilmont | 1:0c9d93e2f51c | 47 | /* Public Macros -------------------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 48 | /** @defgroup EMAC_Public_Macros EMAC Public Macros |
| emilmont | 1:0c9d93e2f51c | 49 | * @{ |
| emilmont | 1:0c9d93e2f51c | 50 | */ |
| emilmont | 1:0c9d93e2f51c | 51 | |
| emilmont | 1:0c9d93e2f51c | 52 | |
| emilmont | 1:0c9d93e2f51c | 53 | /* EMAC PHY status type definitions */ |
| emilmont | 1:0c9d93e2f51c | 54 | #define EMAC_PHY_STAT_LINK (0) /**< Link Status */ |
| emilmont | 1:0c9d93e2f51c | 55 | #define EMAC_PHY_STAT_SPEED (1) /**< Speed Status */ |
| emilmont | 1:0c9d93e2f51c | 56 | #define EMAC_PHY_STAT_DUP (2) /**< Duplex Status */ |
| emilmont | 1:0c9d93e2f51c | 57 | |
| emilmont | 1:0c9d93e2f51c | 58 | /* EMAC PHY device Speed definitions */ |
| emilmont | 1:0c9d93e2f51c | 59 | #define EMAC_MODE_AUTO (0) /**< Auto-negotiation mode */ |
| emilmont | 1:0c9d93e2f51c | 60 | #define EMAC_MODE_10M_FULL (1) /**< 10Mbps FullDuplex mode */ |
| emilmont | 1:0c9d93e2f51c | 61 | #define EMAC_MODE_10M_HALF (2) /**< 10Mbps HalfDuplex mode */ |
| emilmont | 1:0c9d93e2f51c | 62 | #define EMAC_MODE_100M_FULL (3) /**< 100Mbps FullDuplex mode */ |
| emilmont | 1:0c9d93e2f51c | 63 | #define EMAC_MODE_100M_HALF (4) /**< 100Mbps HalfDuplex mode */ |
| emilmont | 1:0c9d93e2f51c | 64 | |
| emilmont | 1:0c9d93e2f51c | 65 | /** |
| emilmont | 1:0c9d93e2f51c | 66 | * @} |
| emilmont | 1:0c9d93e2f51c | 67 | */ |
| emilmont | 1:0c9d93e2f51c | 68 | /* Private Macros ------------------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 69 | /** @defgroup EMAC_Private_Macros EMAC Private Macros |
| emilmont | 1:0c9d93e2f51c | 70 | * @{ |
| emilmont | 1:0c9d93e2f51c | 71 | */ |
| emilmont | 1:0c9d93e2f51c | 72 | |
| emilmont | 1:0c9d93e2f51c | 73 | |
| emilmont | 1:0c9d93e2f51c | 74 | /* EMAC Memory Buffer configuration for 16K Ethernet RAM */ |
| emilmont | 1:0c9d93e2f51c | 75 | #define EMAC_NUM_RX_FRAG 4 /**< Num.of RX Fragments 4*1536= 6.0kB */ |
| emilmont | 1:0c9d93e2f51c | 76 | #define EMAC_NUM_TX_FRAG 3 /**< Num.of TX Fragments 3*1536= 4.6kB */ |
| emilmont | 1:0c9d93e2f51c | 77 | #define EMAC_ETH_MAX_FLEN 1536 /**< Max. Ethernet Frame Size */ |
| emilmont | 1:0c9d93e2f51c | 78 | #define EMAC_TX_FRAME_TOUT 0x00100000 /**< Frame Transmit timeout count */ |
| emilmont | 1:0c9d93e2f51c | 79 | |
| emilmont | 1:0c9d93e2f51c | 80 | /* --------------------- BIT DEFINITIONS -------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 81 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 82 | * Macro defines for MAC Configuration Register 1 |
| emilmont | 1:0c9d93e2f51c | 83 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 84 | #define EMAC_MAC1_REC_EN 0x00000001 /**< Receive Enable */ |
| emilmont | 1:0c9d93e2f51c | 85 | #define EMAC_MAC1_PASS_ALL 0x00000002 /**< Pass All Receive Frames */ |
| emilmont | 1:0c9d93e2f51c | 86 | #define EMAC_MAC1_RX_FLOWC 0x00000004 /**< RX Flow Control */ |
| emilmont | 1:0c9d93e2f51c | 87 | #define EMAC_MAC1_TX_FLOWC 0x00000008 /**< TX Flow Control */ |
| emilmont | 1:0c9d93e2f51c | 88 | #define EMAC_MAC1_LOOPB 0x00000010 /**< Loop Back Mode */ |
| emilmont | 1:0c9d93e2f51c | 89 | #define EMAC_MAC1_RES_TX 0x00000100 /**< Reset TX Logic */ |
| emilmont | 1:0c9d93e2f51c | 90 | #define EMAC_MAC1_RES_MCS_TX 0x00000200 /**< Reset MAC TX Control Sublayer */ |
| emilmont | 1:0c9d93e2f51c | 91 | #define EMAC_MAC1_RES_RX 0x00000400 /**< Reset RX Logic */ |
| emilmont | 1:0c9d93e2f51c | 92 | #define EMAC_MAC1_RES_MCS_RX 0x00000800 /**< Reset MAC RX Control Sublayer */ |
| emilmont | 1:0c9d93e2f51c | 93 | #define EMAC_MAC1_SIM_RES 0x00004000 /**< Simulation Reset */ |
| emilmont | 1:0c9d93e2f51c | 94 | #define EMAC_MAC1_SOFT_RES 0x00008000 /**< Soft Reset MAC */ |
| emilmont | 1:0c9d93e2f51c | 95 | |
| emilmont | 1:0c9d93e2f51c | 96 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 97 | * Macro defines for MAC Configuration Register 2 |
| emilmont | 1:0c9d93e2f51c | 98 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 99 | #define EMAC_MAC2_FULL_DUP 0x00000001 /**< Full-Duplex Mode */ |
| emilmont | 1:0c9d93e2f51c | 100 | #define EMAC_MAC2_FRM_LEN_CHK 0x00000002 /**< Frame Length Checking */ |
| emilmont | 1:0c9d93e2f51c | 101 | #define EMAC_MAC2_HUGE_FRM_EN 0x00000004 /**< Huge Frame Enable */ |
| emilmont | 1:0c9d93e2f51c | 102 | #define EMAC_MAC2_DLY_CRC 0x00000008 /**< Delayed CRC Mode */ |
| emilmont | 1:0c9d93e2f51c | 103 | #define EMAC_MAC2_CRC_EN 0x00000010 /**< Append CRC to every Frame */ |
| emilmont | 1:0c9d93e2f51c | 104 | #define EMAC_MAC2_PAD_EN 0x00000020 /**< Pad all Short Frames */ |
| emilmont | 1:0c9d93e2f51c | 105 | #define EMAC_MAC2_VLAN_PAD_EN 0x00000040 /**< VLAN Pad Enable */ |
| emilmont | 1:0c9d93e2f51c | 106 | #define EMAC_MAC2_ADET_PAD_EN 0x00000080 /**< Auto Detect Pad Enable */ |
| emilmont | 1:0c9d93e2f51c | 107 | #define EMAC_MAC2_PPREAM_ENF 0x00000100 /**< Pure Preamble Enforcement */ |
| emilmont | 1:0c9d93e2f51c | 108 | #define EMAC_MAC2_LPREAM_ENF 0x00000200 /**< Long Preamble Enforcement */ |
| emilmont | 1:0c9d93e2f51c | 109 | #define EMAC_MAC2_NO_BACKOFF 0x00001000 /**< No Backoff Algorithm */ |
| emilmont | 1:0c9d93e2f51c | 110 | #define EMAC_MAC2_BACK_PRESSURE 0x00002000 /**< Backoff Presurre / No Backoff */ |
| emilmont | 1:0c9d93e2f51c | 111 | #define EMAC_MAC2_EXCESS_DEF 0x00004000 /**< Excess Defer */ |
| emilmont | 1:0c9d93e2f51c | 112 | |
| emilmont | 1:0c9d93e2f51c | 113 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 114 | * Macro defines for Back-to-Back Inter-Packet-Gap Register |
| emilmont | 1:0c9d93e2f51c | 115 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 116 | /** Programmable field representing the nibble time offset of the minimum possible period |
| emilmont | 1:0c9d93e2f51c | 117 | * between the end of any transmitted packet to the beginning of the next */ |
| emilmont | 1:0c9d93e2f51c | 118 | #define EMAC_IPGT_BBIPG(n) (n&0x7F) |
| emilmont | 1:0c9d93e2f51c | 119 | /** Recommended value for Full Duplex of Programmable field representing the nibble time |
| emilmont | 1:0c9d93e2f51c | 120 | * offset of the minimum possible period between the end of any transmitted packet to the |
| emilmont | 1:0c9d93e2f51c | 121 | * beginning of the next */ |
| emilmont | 1:0c9d93e2f51c | 122 | #define EMAC_IPGT_FULL_DUP (EMAC_IPGT_BBIPG(0x15)) |
| emilmont | 1:0c9d93e2f51c | 123 | /** Recommended value for Half Duplex of Programmable field representing the nibble time |
| emilmont | 1:0c9d93e2f51c | 124 | * offset of the minimum possible period between the end of any transmitted packet to the |
| emilmont | 1:0c9d93e2f51c | 125 | * beginning of the next */ |
| emilmont | 1:0c9d93e2f51c | 126 | #define EMAC_IPGT_HALF_DUP (EMAC_IPGT_BBIPG(0x12)) |
| emilmont | 1:0c9d93e2f51c | 127 | |
| emilmont | 1:0c9d93e2f51c | 128 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 129 | * Macro defines for Non Back-to-Back Inter-Packet-Gap Register |
| emilmont | 1:0c9d93e2f51c | 130 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 131 | /** Programmable field representing the Non-Back-to-Back Inter-Packet-Gap */ |
| emilmont | 1:0c9d93e2f51c | 132 | #define EMAC_IPGR_NBBIPG_P2(n) (n&0x7F) |
| emilmont | 1:0c9d93e2f51c | 133 | /** Recommended value for Programmable field representing the Non-Back-to-Back Inter-Packet-Gap Part 1 */ |
| emilmont | 1:0c9d93e2f51c | 134 | #define EMAC_IPGR_P2_DEF (EMAC_IPGR_NBBIPG_P2(0x12)) |
| emilmont | 1:0c9d93e2f51c | 135 | /** Programmable field representing the optional carrierSense window referenced in |
| emilmont | 1:0c9d93e2f51c | 136 | * IEEE 802.3/4.2.3.2.1 'Carrier Deference' */ |
| emilmont | 1:0c9d93e2f51c | 137 | #define EMAC_IPGR_NBBIPG_P1(n) ((n&0x7F)<<8) |
| emilmont | 1:0c9d93e2f51c | 138 | /** Recommended value for Programmable field representing the Non-Back-to-Back Inter-Packet-Gap Part 2 */ |
| emilmont | 1:0c9d93e2f51c | 139 | #define EMAC_IPGR_P1_DEF EMAC_IPGR_NBBIPG_P1(0x0C) |
| emilmont | 1:0c9d93e2f51c | 140 | |
| emilmont | 1:0c9d93e2f51c | 141 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 142 | * Macro defines for Collision Window/Retry Register |
| emilmont | 1:0c9d93e2f51c | 143 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 144 | /** Programmable field specifying the number of retransmission attempts following a collision before |
| emilmont | 1:0c9d93e2f51c | 145 | * aborting the packet due to excessive collisions */ |
| emilmont | 1:0c9d93e2f51c | 146 | #define EMAC_CLRT_MAX_RETX(n) (n&0x0F) |
| emilmont | 1:0c9d93e2f51c | 147 | /** Programmable field representing the slot time or collision window during which collisions occur |
| emilmont | 1:0c9d93e2f51c | 148 | * in properly configured networks */ |
| emilmont | 1:0c9d93e2f51c | 149 | #define EMAC_CLRT_COLL(n) ((n&0x3F)<<8) |
| emilmont | 1:0c9d93e2f51c | 150 | /** Default value for Collision Window / Retry register */ |
| emilmont | 1:0c9d93e2f51c | 151 | #define EMAC_CLRT_DEF ((EMAC_CLRT_MAX_RETX(0x0F))|(EMAC_CLRT_COLL(0x37))) |
| emilmont | 1:0c9d93e2f51c | 152 | |
| emilmont | 1:0c9d93e2f51c | 153 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 154 | * Macro defines for Maximum Frame Register |
| emilmont | 1:0c9d93e2f51c | 155 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 156 | /** Represents a maximum receive frame of 1536 octets */ |
| emilmont | 1:0c9d93e2f51c | 157 | #define EMAC_MAXF_MAXFRMLEN(n) (n&0xFFFF) |
| emilmont | 1:0c9d93e2f51c | 158 | |
| emilmont | 1:0c9d93e2f51c | 159 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 160 | * Macro defines for PHY Support Register |
| emilmont | 1:0c9d93e2f51c | 161 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 162 | #define EMAC_SUPP_SPEED 0x00000100 /**< Reduced MII Logic Current Speed */ |
| emilmont | 1:0c9d93e2f51c | 163 | #define EMAC_SUPP_RES_RMII 0x00000800 /**< Reset Reduced MII Logic */ |
| emilmont | 1:0c9d93e2f51c | 164 | |
| emilmont | 1:0c9d93e2f51c | 165 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 166 | * Macro defines for Test Register |
| emilmont | 1:0c9d93e2f51c | 167 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 168 | #define EMAC_TEST_SHCUT_PQUANTA 0x00000001 /**< Shortcut Pause Quanta */ |
| emilmont | 1:0c9d93e2f51c | 169 | #define EMAC_TEST_TST_PAUSE 0x00000002 /**< Test Pause */ |
| emilmont | 1:0c9d93e2f51c | 170 | #define EMAC_TEST_TST_BACKP 0x00000004 /**< Test Back Pressure */ |
| emilmont | 1:0c9d93e2f51c | 171 | |
| emilmont | 1:0c9d93e2f51c | 172 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 173 | * Macro defines for MII Management Configuration Register |
| emilmont | 1:0c9d93e2f51c | 174 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 175 | #define EMAC_MCFG_SCAN_INC 0x00000001 /**< Scan Increment PHY Address */ |
| emilmont | 1:0c9d93e2f51c | 176 | #define EMAC_MCFG_SUPP_PREAM 0x00000002 /**< Suppress Preamble */ |
| emilmont | 1:0c9d93e2f51c | 177 | #define EMAC_MCFG_CLK_SEL(n) ((n&0x0F)<<2) /**< Clock Select Field */ |
| emilmont | 1:0c9d93e2f51c | 178 | #define EMAC_MCFG_RES_MII 0x00008000 /**< Reset MII Management Hardware */ |
| emilmont | 1:0c9d93e2f51c | 179 | #define EMAC_MCFG_MII_MAXCLK 2500000UL /**< MII Clock max */ |
| emilmont | 1:0c9d93e2f51c | 180 | |
| emilmont | 1:0c9d93e2f51c | 181 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 182 | * Macro defines for MII Management Command Register |
| emilmont | 1:0c9d93e2f51c | 183 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 184 | #define EMAC_MCMD_READ 0x00000001 /**< MII Read */ |
| emilmont | 1:0c9d93e2f51c | 185 | #define EMAC_MCMD_SCAN 0x00000002 /**< MII Scan continuously */ |
| emilmont | 1:0c9d93e2f51c | 186 | |
| emilmont | 1:0c9d93e2f51c | 187 | #define EMAC_MII_WR_TOUT 0x00050000 /**< MII Write timeout count */ |
| emilmont | 1:0c9d93e2f51c | 188 | #define EMAC_MII_RD_TOUT 0x00050000 /**< MII Read timeout count */ |
| emilmont | 1:0c9d93e2f51c | 189 | |
| emilmont | 1:0c9d93e2f51c | 190 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 191 | * Macro defines for MII Management Address Register |
| emilmont | 1:0c9d93e2f51c | 192 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 193 | #define EMAC_MADR_REG_ADR(n) (n&0x1F) /**< MII Register Address field */ |
| emilmont | 1:0c9d93e2f51c | 194 | #define EMAC_MADR_PHY_ADR(n) ((n&0x1F)<<8) /**< PHY Address Field */ |
| emilmont | 1:0c9d93e2f51c | 195 | |
| emilmont | 1:0c9d93e2f51c | 196 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 197 | * Macro defines for MII Management Write Data Register |
| emilmont | 1:0c9d93e2f51c | 198 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 199 | #define EMAC_MWTD_DATA(n) (n&0xFFFF) /**< Data field for MMI Management Write Data register */ |
| emilmont | 1:0c9d93e2f51c | 200 | |
| emilmont | 1:0c9d93e2f51c | 201 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 202 | * Macro defines for MII Management Read Data Register |
| emilmont | 1:0c9d93e2f51c | 203 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 204 | #define EMAC_MRDD_DATA(n) (n&0xFFFF) /**< Data field for MMI Management Read Data register */ |
| emilmont | 1:0c9d93e2f51c | 205 | |
| emilmont | 1:0c9d93e2f51c | 206 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 207 | * Macro defines for MII Management Indicators Register |
| emilmont | 1:0c9d93e2f51c | 208 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 209 | #define EMAC_MIND_BUSY 0x00000001 /**< MII is Busy */ |
| emilmont | 1:0c9d93e2f51c | 210 | #define EMAC_MIND_SCAN 0x00000002 /**< MII Scanning in Progress */ |
| emilmont | 1:0c9d93e2f51c | 211 | #define EMAC_MIND_NOT_VAL 0x00000004 /**< MII Read Data not valid */ |
| emilmont | 1:0c9d93e2f51c | 212 | #define EMAC_MIND_MII_LINK_FAIL 0x00000008 /**< MII Link Failed */ |
| emilmont | 1:0c9d93e2f51c | 213 | |
| emilmont | 1:0c9d93e2f51c | 214 | /* Station Address 0 Register */ |
| emilmont | 1:0c9d93e2f51c | 215 | /* Station Address 1 Register */ |
| emilmont | 1:0c9d93e2f51c | 216 | /* Station Address 2 Register */ |
| emilmont | 1:0c9d93e2f51c | 217 | |
| emilmont | 1:0c9d93e2f51c | 218 | |
| emilmont | 1:0c9d93e2f51c | 219 | /* Control register definitions --------------------------------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 220 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 221 | * Macro defines for Command Register |
| emilmont | 1:0c9d93e2f51c | 222 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 223 | #define EMAC_CR_RX_EN 0x00000001 /**< Enable Receive */ |
| emilmont | 1:0c9d93e2f51c | 224 | #define EMAC_CR_TX_EN 0x00000002 /**< Enable Transmit */ |
| emilmont | 1:0c9d93e2f51c | 225 | #define EMAC_CR_REG_RES 0x00000008 /**< Reset Host Registers */ |
| emilmont | 1:0c9d93e2f51c | 226 | #define EMAC_CR_TX_RES 0x00000010 /**< Reset Transmit Datapath */ |
| emilmont | 1:0c9d93e2f51c | 227 | #define EMAC_CR_RX_RES 0x00000020 /**< Reset Receive Datapath */ |
| emilmont | 1:0c9d93e2f51c | 228 | #define EMAC_CR_PASS_RUNT_FRM 0x00000040 /**< Pass Runt Frames */ |
| emilmont | 1:0c9d93e2f51c | 229 | #define EMAC_CR_PASS_RX_FILT 0x00000080 /**< Pass RX Filter */ |
| emilmont | 1:0c9d93e2f51c | 230 | #define EMAC_CR_TX_FLOW_CTRL 0x00000100 /**< TX Flow Control */ |
| emilmont | 1:0c9d93e2f51c | 231 | #define EMAC_CR_RMII 0x00000200 /**< Reduced MII Interface */ |
| emilmont | 1:0c9d93e2f51c | 232 | #define EMAC_CR_FULL_DUP 0x00000400 /**< Full Duplex */ |
| emilmont | 1:0c9d93e2f51c | 233 | |
| emilmont | 1:0c9d93e2f51c | 234 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 235 | * Macro defines for Status Register |
| emilmont | 1:0c9d93e2f51c | 236 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 237 | #define EMAC_SR_RX_EN 0x00000001 /**< Enable Receive */ |
| emilmont | 1:0c9d93e2f51c | 238 | #define EMAC_SR_TX_EN 0x00000002 /**< Enable Transmit */ |
| emilmont | 1:0c9d93e2f51c | 239 | |
| emilmont | 1:0c9d93e2f51c | 240 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 241 | * Macro defines for Transmit Status Vector 0 Register |
| emilmont | 1:0c9d93e2f51c | 242 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 243 | #define EMAC_TSV0_CRC_ERR 0x00000001 /**< CRC error */ |
| emilmont | 1:0c9d93e2f51c | 244 | #define EMAC_TSV0_LEN_CHKERR 0x00000002 /**< Length Check Error */ |
| emilmont | 1:0c9d93e2f51c | 245 | #define EMAC_TSV0_LEN_OUTRNG 0x00000004 /**< Length Out of Range */ |
| emilmont | 1:0c9d93e2f51c | 246 | #define EMAC_TSV0_DONE 0x00000008 /**< Tramsmission Completed */ |
| emilmont | 1:0c9d93e2f51c | 247 | #define EMAC_TSV0_MCAST 0x00000010 /**< Multicast Destination */ |
| emilmont | 1:0c9d93e2f51c | 248 | #define EMAC_TSV0_BCAST 0x00000020 /**< Broadcast Destination */ |
| emilmont | 1:0c9d93e2f51c | 249 | #define EMAC_TSV0_PKT_DEFER 0x00000040 /**< Packet Deferred */ |
| emilmont | 1:0c9d93e2f51c | 250 | #define EMAC_TSV0_EXC_DEFER 0x00000080 /**< Excessive Packet Deferral */ |
| emilmont | 1:0c9d93e2f51c | 251 | #define EMAC_TSV0_EXC_COLL 0x00000100 /**< Excessive Collision */ |
| emilmont | 1:0c9d93e2f51c | 252 | #define EMAC_TSV0_LATE_COLL 0x00000200 /**< Late Collision Occured */ |
| emilmont | 1:0c9d93e2f51c | 253 | #define EMAC_TSV0_GIANT 0x00000400 /**< Giant Frame */ |
| emilmont | 1:0c9d93e2f51c | 254 | #define EMAC_TSV0_UNDERRUN 0x00000800 /**< Buffer Underrun */ |
| emilmont | 1:0c9d93e2f51c | 255 | #define EMAC_TSV0_BYTES 0x0FFFF000 /**< Total Bytes Transferred */ |
| emilmont | 1:0c9d93e2f51c | 256 | #define EMAC_TSV0_CTRL_FRAME 0x10000000 /**< Control Frame */ |
| emilmont | 1:0c9d93e2f51c | 257 | #define EMAC_TSV0_PAUSE 0x20000000 /**< Pause Frame */ |
| emilmont | 1:0c9d93e2f51c | 258 | #define EMAC_TSV0_BACK_PRESS 0x40000000 /**< Backpressure Method Applied */ |
| emilmont | 1:0c9d93e2f51c | 259 | #define EMAC_TSV0_VLAN 0x80000000 /**< VLAN Frame */ |
| emilmont | 1:0c9d93e2f51c | 260 | |
| emilmont | 1:0c9d93e2f51c | 261 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 262 | * Macro defines for Transmit Status Vector 1 Register |
| emilmont | 1:0c9d93e2f51c | 263 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 264 | #define EMAC_TSV1_BYTE_CNT 0x0000FFFF /**< Transmit Byte Count */ |
| emilmont | 1:0c9d93e2f51c | 265 | #define EMAC_TSV1_COLL_CNT 0x000F0000 /**< Transmit Collision Count */ |
| emilmont | 1:0c9d93e2f51c | 266 | |
| emilmont | 1:0c9d93e2f51c | 267 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 268 | * Macro defines for Receive Status Vector Register |
| emilmont | 1:0c9d93e2f51c | 269 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 270 | #define EMAC_RSV_BYTE_CNT 0x0000FFFF /**< Receive Byte Count */ |
| emilmont | 1:0c9d93e2f51c | 271 | #define EMAC_RSV_PKT_IGNORED 0x00010000 /**< Packet Previously Ignored */ |
| emilmont | 1:0c9d93e2f51c | 272 | #define EMAC_RSV_RXDV_SEEN 0x00020000 /**< RXDV Event Previously Seen */ |
| emilmont | 1:0c9d93e2f51c | 273 | #define EMAC_RSV_CARR_SEEN 0x00040000 /**< Carrier Event Previously Seen */ |
| emilmont | 1:0c9d93e2f51c | 274 | #define EMAC_RSV_REC_CODEV 0x00080000 /**< Receive Code Violation */ |
| emilmont | 1:0c9d93e2f51c | 275 | #define EMAC_RSV_CRC_ERR 0x00100000 /**< CRC Error */ |
| emilmont | 1:0c9d93e2f51c | 276 | #define EMAC_RSV_LEN_CHKERR 0x00200000 /**< Length Check Error */ |
| emilmont | 1:0c9d93e2f51c | 277 | #define EMAC_RSV_LEN_OUTRNG 0x00400000 /**< Length Out of Range */ |
| emilmont | 1:0c9d93e2f51c | 278 | #define EMAC_RSV_REC_OK 0x00800000 /**< Frame Received OK */ |
| emilmont | 1:0c9d93e2f51c | 279 | #define EMAC_RSV_MCAST 0x01000000 /**< Multicast Frame */ |
| emilmont | 1:0c9d93e2f51c | 280 | #define EMAC_RSV_BCAST 0x02000000 /**< Broadcast Frame */ |
| emilmont | 1:0c9d93e2f51c | 281 | #define EMAC_RSV_DRIB_NIBB 0x04000000 /**< Dribble Nibble */ |
| emilmont | 1:0c9d93e2f51c | 282 | #define EMAC_RSV_CTRL_FRAME 0x08000000 /**< Control Frame */ |
| emilmont | 1:0c9d93e2f51c | 283 | #define EMAC_RSV_PAUSE 0x10000000 /**< Pause Frame */ |
| emilmont | 1:0c9d93e2f51c | 284 | #define EMAC_RSV_UNSUPP_OPC 0x20000000 /**< Unsupported Opcode */ |
| emilmont | 1:0c9d93e2f51c | 285 | #define EMAC_RSV_VLAN 0x40000000 /**< VLAN Frame */ |
| emilmont | 1:0c9d93e2f51c | 286 | |
| emilmont | 1:0c9d93e2f51c | 287 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 288 | * Macro defines for Flow Control Counter Register |
| emilmont | 1:0c9d93e2f51c | 289 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 290 | #define EMAC_FCC_MIRR_CNT(n) (n&0xFFFF) /**< Mirror Counter */ |
| emilmont | 1:0c9d93e2f51c | 291 | #define EMAC_FCC_PAUSE_TIM(n) ((n&0xFFFF)<<16) /**< Pause Timer */ |
| emilmont | 1:0c9d93e2f51c | 292 | |
| emilmont | 1:0c9d93e2f51c | 293 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 294 | * Macro defines for Flow Control Status Register |
| emilmont | 1:0c9d93e2f51c | 295 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 296 | #define EMAC_FCS_MIRR_CNT(n) (n&0xFFFF) /**< Mirror Counter Current */ |
| emilmont | 1:0c9d93e2f51c | 297 | |
| emilmont | 1:0c9d93e2f51c | 298 | |
| emilmont | 1:0c9d93e2f51c | 299 | /* Receive filter register definitions -------------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 300 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 301 | * Macro defines for Receive Filter Control Register |
| emilmont | 1:0c9d93e2f51c | 302 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 303 | #define EMAC_RFC_UCAST_EN 0x00000001 /**< Accept Unicast Frames Enable */ |
| emilmont | 1:0c9d93e2f51c | 304 | #define EMAC_RFC_BCAST_EN 0x00000002 /**< Accept Broadcast Frames Enable */ |
| emilmont | 1:0c9d93e2f51c | 305 | #define EMAC_RFC_MCAST_EN 0x00000004 /**< Accept Multicast Frames Enable */ |
| emilmont | 1:0c9d93e2f51c | 306 | #define EMAC_RFC_UCAST_HASH_EN 0x00000008 /**< Accept Unicast Hash Filter Frames */ |
| emilmont | 1:0c9d93e2f51c | 307 | #define EMAC_RFC_MCAST_HASH_EN 0x00000010 /**< Accept Multicast Hash Filter Fram.*/ |
| emilmont | 1:0c9d93e2f51c | 308 | #define EMAC_RFC_PERFECT_EN 0x00000020 /**< Accept Perfect Match Enable */ |
| emilmont | 1:0c9d93e2f51c | 309 | #define EMAC_RFC_MAGP_WOL_EN 0x00001000 /**< Magic Packet Filter WoL Enable */ |
| emilmont | 1:0c9d93e2f51c | 310 | #define EMAC_RFC_PFILT_WOL_EN 0x00002000 /**< Perfect Filter WoL Enable */ |
| emilmont | 1:0c9d93e2f51c | 311 | |
| emilmont | 1:0c9d93e2f51c | 312 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 313 | * Macro defines for Receive Filter WoL Status/Clear Registers |
| emilmont | 1:0c9d93e2f51c | 314 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 315 | #define EMAC_WOL_UCAST 0x00000001 /**< Unicast Frame caused WoL */ |
| emilmont | 1:0c9d93e2f51c | 316 | #define EMAC_WOL_BCAST 0x00000002 /**< Broadcast Frame caused WoL */ |
| emilmont | 1:0c9d93e2f51c | 317 | #define EMAC_WOL_MCAST 0x00000004 /**< Multicast Frame caused WoL */ |
| emilmont | 1:0c9d93e2f51c | 318 | #define EMAC_WOL_UCAST_HASH 0x00000008 /**< Unicast Hash Filter Frame WoL */ |
| emilmont | 1:0c9d93e2f51c | 319 | #define EMAC_WOL_MCAST_HASH 0x00000010 /**< Multicast Hash Filter Frame WoL */ |
| emilmont | 1:0c9d93e2f51c | 320 | #define EMAC_WOL_PERFECT 0x00000020 /**< Perfect Filter WoL */ |
| emilmont | 1:0c9d93e2f51c | 321 | #define EMAC_WOL_RX_FILTER 0x00000080 /**< RX Filter caused WoL */ |
| emilmont | 1:0c9d93e2f51c | 322 | #define EMAC_WOL_MAG_PACKET 0x00000100 /**< Magic Packet Filter caused WoL */ |
| emilmont | 1:0c9d93e2f51c | 323 | #define EMAC_WOL_BITMASK 0x01BF /**< Receive Filter WoL Status/Clear bitmasl value */ |
| emilmont | 1:0c9d93e2f51c | 324 | |
| emilmont | 1:0c9d93e2f51c | 325 | |
| emilmont | 1:0c9d93e2f51c | 326 | /* Module control register definitions ---------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 327 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 328 | * Macro defines for Interrupt Status/Enable/Clear/Set Registers |
| emilmont | 1:0c9d93e2f51c | 329 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 330 | #define EMAC_INT_RX_OVERRUN 0x00000001 /**< Overrun Error in RX Queue */ |
| emilmont | 1:0c9d93e2f51c | 331 | #define EMAC_INT_RX_ERR 0x00000002 /**< Receive Error */ |
| emilmont | 1:0c9d93e2f51c | 332 | #define EMAC_INT_RX_FIN 0x00000004 /**< RX Finished Process Descriptors */ |
| emilmont | 1:0c9d93e2f51c | 333 | #define EMAC_INT_RX_DONE 0x00000008 /**< Receive Done */ |
| emilmont | 1:0c9d93e2f51c | 334 | #define EMAC_INT_TX_UNDERRUN 0x00000010 /**< Transmit Underrun */ |
| emilmont | 1:0c9d93e2f51c | 335 | #define EMAC_INT_TX_ERR 0x00000020 /**< Transmit Error */ |
| emilmont | 1:0c9d93e2f51c | 336 | #define EMAC_INT_TX_FIN 0x00000040 /**< TX Finished Process Descriptors */ |
| emilmont | 1:0c9d93e2f51c | 337 | #define EMAC_INT_TX_DONE 0x00000080 /**< Transmit Done */ |
| emilmont | 1:0c9d93e2f51c | 338 | #define EMAC_INT_SOFT_INT 0x00001000 /**< Software Triggered Interrupt */ |
| emilmont | 1:0c9d93e2f51c | 339 | #define EMAC_INT_WAKEUP 0x00002000 /**< Wakeup Event Interrupt */ |
| emilmont | 1:0c9d93e2f51c | 340 | |
| emilmont | 1:0c9d93e2f51c | 341 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 342 | * Macro defines for Power Down Register |
| emilmont | 1:0c9d93e2f51c | 343 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 344 | #define EMAC_PD_POWER_DOWN 0x80000000 /**< Power Down MAC */ |
| emilmont | 1:0c9d93e2f51c | 345 | |
| emilmont | 1:0c9d93e2f51c | 346 | /* Descriptor and status formats ---------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 347 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 348 | * Macro defines for RX Descriptor Control Word |
| emilmont | 1:0c9d93e2f51c | 349 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 350 | #define EMAC_RCTRL_SIZE(n) (n&0x7FF) /**< Buffer size field */ |
| emilmont | 1:0c9d93e2f51c | 351 | #define EMAC_RCTRL_INT 0x80000000 /**< Generate RxDone Interrupt */ |
| emilmont | 1:0c9d93e2f51c | 352 | |
| emilmont | 1:0c9d93e2f51c | 353 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 354 | * Macro defines for RX Status Hash CRC Word |
| emilmont | 1:0c9d93e2f51c | 355 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 356 | #define EMAC_RHASH_SA 0x000001FF /**< Hash CRC for Source Address */ |
| emilmont | 1:0c9d93e2f51c | 357 | #define EMAC_RHASH_DA 0x001FF000 /**< Hash CRC for Destination Address */ |
| emilmont | 1:0c9d93e2f51c | 358 | |
| emilmont | 1:0c9d93e2f51c | 359 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 360 | * Macro defines for RX Status Information Word |
| emilmont | 1:0c9d93e2f51c | 361 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 362 | #define EMAC_RINFO_SIZE 0x000007FF /**< Data size in bytes */ |
| emilmont | 1:0c9d93e2f51c | 363 | #define EMAC_RINFO_CTRL_FRAME 0x00040000 /**< Control Frame */ |
| emilmont | 1:0c9d93e2f51c | 364 | #define EMAC_RINFO_VLAN 0x00080000 /**< VLAN Frame */ |
| emilmont | 1:0c9d93e2f51c | 365 | #define EMAC_RINFO_FAIL_FILT 0x00100000 /**< RX Filter Failed */ |
| emilmont | 1:0c9d93e2f51c | 366 | #define EMAC_RINFO_MCAST 0x00200000 /**< Multicast Frame */ |
| emilmont | 1:0c9d93e2f51c | 367 | #define EMAC_RINFO_BCAST 0x00400000 /**< Broadcast Frame */ |
| emilmont | 1:0c9d93e2f51c | 368 | #define EMAC_RINFO_CRC_ERR 0x00800000 /**< CRC Error in Frame */ |
| emilmont | 1:0c9d93e2f51c | 369 | #define EMAC_RINFO_SYM_ERR 0x01000000 /**< Symbol Error from PHY */ |
| emilmont | 1:0c9d93e2f51c | 370 | #define EMAC_RINFO_LEN_ERR 0x02000000 /**< Length Error */ |
| emilmont | 1:0c9d93e2f51c | 371 | #define EMAC_RINFO_RANGE_ERR 0x04000000 /**< Range Error (exceeded max. size) */ |
| emilmont | 1:0c9d93e2f51c | 372 | #define EMAC_RINFO_ALIGN_ERR 0x08000000 /**< Alignment Error */ |
| emilmont | 1:0c9d93e2f51c | 373 | #define EMAC_RINFO_OVERRUN 0x10000000 /**< Receive overrun */ |
| emilmont | 1:0c9d93e2f51c | 374 | #define EMAC_RINFO_NO_DESCR 0x20000000 /**< No new Descriptor available */ |
| emilmont | 1:0c9d93e2f51c | 375 | #define EMAC_RINFO_LAST_FLAG 0x40000000 /**< Last Fragment in Frame */ |
| emilmont | 1:0c9d93e2f51c | 376 | #define EMAC_RINFO_ERR 0x80000000 /**< Error Occured (OR of all errors) */ |
| emilmont | 1:0c9d93e2f51c | 377 | #define EMAC_RINFO_ERR_MASK (EMAC_RINFO_FAIL_FILT | EMAC_RINFO_CRC_ERR | EMAC_RINFO_SYM_ERR | \ |
| emilmont | 1:0c9d93e2f51c | 378 | EMAC_RINFO_LEN_ERR | EMAC_RINFO_ALIGN_ERR | EMAC_RINFO_OVERRUN) |
| emilmont | 1:0c9d93e2f51c | 379 | |
| emilmont | 1:0c9d93e2f51c | 380 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 381 | * Macro defines for TX Descriptor Control Word |
| emilmont | 1:0c9d93e2f51c | 382 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 383 | #define EMAC_TCTRL_SIZE 0x000007FF /**< Size of data buffer in bytes */ |
| emilmont | 1:0c9d93e2f51c | 384 | #define EMAC_TCTRL_OVERRIDE 0x04000000 /**< Override Default MAC Registers */ |
| emilmont | 1:0c9d93e2f51c | 385 | #define EMAC_TCTRL_HUGE 0x08000000 /**< Enable Huge Frame */ |
| emilmont | 1:0c9d93e2f51c | 386 | #define EMAC_TCTRL_PAD 0x10000000 /**< Pad short Frames to 64 bytes */ |
| emilmont | 1:0c9d93e2f51c | 387 | #define EMAC_TCTRL_CRC 0x20000000 /**< Append a hardware CRC to Frame */ |
| emilmont | 1:0c9d93e2f51c | 388 | #define EMAC_TCTRL_LAST 0x40000000 /**< Last Descriptor for TX Frame */ |
| emilmont | 1:0c9d93e2f51c | 389 | #define EMAC_TCTRL_INT 0x80000000 /**< Generate TxDone Interrupt */ |
| emilmont | 1:0c9d93e2f51c | 390 | |
| emilmont | 1:0c9d93e2f51c | 391 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 392 | * Macro defines for TX Status Information Word |
| emilmont | 1:0c9d93e2f51c | 393 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 394 | #define EMAC_TINFO_COL_CNT 0x01E00000 /**< Collision Count */ |
| emilmont | 1:0c9d93e2f51c | 395 | #define EMAC_TINFO_DEFER 0x02000000 /**< Packet Deferred (not an error) */ |
| emilmont | 1:0c9d93e2f51c | 396 | #define EMAC_TINFO_EXCESS_DEF 0x04000000 /**< Excessive Deferral */ |
| emilmont | 1:0c9d93e2f51c | 397 | #define EMAC_TINFO_EXCESS_COL 0x08000000 /**< Excessive Collision */ |
| emilmont | 1:0c9d93e2f51c | 398 | #define EMAC_TINFO_LATE_COL 0x10000000 /**< Late Collision Occured */ |
| emilmont | 1:0c9d93e2f51c | 399 | #define EMAC_TINFO_UNDERRUN 0x20000000 /**< Transmit Underrun */ |
| emilmont | 1:0c9d93e2f51c | 400 | #define EMAC_TINFO_NO_DESCR 0x40000000 /**< No new Descriptor available */ |
| emilmont | 1:0c9d93e2f51c | 401 | #define EMAC_TINFO_ERR 0x80000000 /**< Error Occured (OR of all errors) */ |
| emilmont | 1:0c9d93e2f51c | 402 | |
| emilmont | 1:0c9d93e2f51c | 403 | #ifdef MCB_LPC_1768 |
| emilmont | 1:0c9d93e2f51c | 404 | /* DP83848C PHY definition ------------------------------------------------------------ */ |
| emilmont | 1:0c9d93e2f51c | 405 | |
| emilmont | 1:0c9d93e2f51c | 406 | /** PHY device reset time out definition */ |
| emilmont | 1:0c9d93e2f51c | 407 | #define EMAC_PHY_RESP_TOUT 0x100000UL |
| emilmont | 1:0c9d93e2f51c | 408 | |
| emilmont | 1:0c9d93e2f51c | 409 | /* ENET Device Revision ID */ |
| emilmont | 1:0c9d93e2f51c | 410 | #define EMAC_OLD_EMAC_MODULE_ID 0x39022000 /**< Rev. ID for first rev '-' */ |
| emilmont | 1:0c9d93e2f51c | 411 | |
| emilmont | 1:0c9d93e2f51c | 412 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 413 | * Macro defines for DP83848C PHY Registers |
| emilmont | 1:0c9d93e2f51c | 414 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 415 | #define EMAC_PHY_REG_BMCR 0x00 /**< Basic Mode Control Register */ |
| emilmont | 1:0c9d93e2f51c | 416 | #define EMAC_PHY_REG_BMSR 0x01 /**< Basic Mode Status Register */ |
| emilmont | 1:0c9d93e2f51c | 417 | #define EMAC_PHY_REG_IDR1 0x02 /**< PHY Identifier 1 */ |
| emilmont | 1:0c9d93e2f51c | 418 | #define EMAC_PHY_REG_IDR2 0x03 /**< PHY Identifier 2 */ |
| emilmont | 1:0c9d93e2f51c | 419 | #define EMAC_PHY_REG_ANAR 0x04 /**< Auto-Negotiation Advertisement */ |
| emilmont | 1:0c9d93e2f51c | 420 | #define EMAC_PHY_REG_ANLPAR 0x05 /**< Auto-Neg. Link Partner Abitily */ |
| emilmont | 1:0c9d93e2f51c | 421 | #define EMAC_PHY_REG_ANER 0x06 /**< Auto-Neg. Expansion Register */ |
| emilmont | 1:0c9d93e2f51c | 422 | #define EMAC_PHY_REG_ANNPTR 0x07 /**< Auto-Neg. Next Page TX */ |
| emilmont | 1:0c9d93e2f51c | 423 | #define EMAC_PHY_REG_LPNPA 0x08 |
| emilmont | 1:0c9d93e2f51c | 424 | |
| emilmont | 1:0c9d93e2f51c | 425 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 426 | * Macro defines for PHY Extended Registers |
| emilmont | 1:0c9d93e2f51c | 427 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 428 | #define EMAC_PHY_REG_STS 0x10 /**< Status Register */ |
| emilmont | 1:0c9d93e2f51c | 429 | #define EMAC_PHY_REG_MICR 0x11 /**< MII Interrupt Control Register */ |
| emilmont | 1:0c9d93e2f51c | 430 | #define EMAC_PHY_REG_MISR 0x12 /**< MII Interrupt Status Register */ |
| emilmont | 1:0c9d93e2f51c | 431 | #define EMAC_PHY_REG_FCSCR 0x14 /**< False Carrier Sense Counter */ |
| emilmont | 1:0c9d93e2f51c | 432 | #define EMAC_PHY_REG_RECR 0x15 /**< Receive Error Counter */ |
| emilmont | 1:0c9d93e2f51c | 433 | #define EMAC_PHY_REG_PCSR 0x16 /**< PCS Sublayer Config. and Status */ |
| emilmont | 1:0c9d93e2f51c | 434 | #define EMAC_PHY_REG_RBR 0x17 /**< RMII and Bypass Register */ |
| emilmont | 1:0c9d93e2f51c | 435 | #define EMAC_PHY_REG_LEDCR 0x18 /**< LED Direct Control Register */ |
| emilmont | 1:0c9d93e2f51c | 436 | #define EMAC_PHY_REG_PHYCR 0x19 /**< PHY Control Register */ |
| emilmont | 1:0c9d93e2f51c | 437 | #define EMAC_PHY_REG_10BTSCR 0x1A /**< 10Base-T Status/Control Register */ |
| emilmont | 1:0c9d93e2f51c | 438 | #define EMAC_PHY_REG_CDCTRL1 0x1B /**< CD Test Control and BIST Extens. */ |
| emilmont | 1:0c9d93e2f51c | 439 | #define EMAC_PHY_REG_EDCR 0x1D /**< Energy Detect Control Register */ |
| emilmont | 1:0c9d93e2f51c | 440 | |
| emilmont | 1:0c9d93e2f51c | 441 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 442 | * Macro defines for PHY Basic Mode Control Register |
| emilmont | 1:0c9d93e2f51c | 443 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 444 | #define EMAC_PHY_BMCR_RESET (1<<15) /**< Reset bit */ |
| emilmont | 1:0c9d93e2f51c | 445 | #define EMAC_PHY_BMCR_LOOPBACK (1<<14) /**< Loop back */ |
| emilmont | 1:0c9d93e2f51c | 446 | #define EMAC_PHY_BMCR_SPEED_SEL (1<<13) /**< Speed selection */ |
| emilmont | 1:0c9d93e2f51c | 447 | #define EMAC_PHY_BMCR_AN (1<<12) /**< Auto Negotiation */ |
| emilmont | 1:0c9d93e2f51c | 448 | #define EMAC_PHY_BMCR_POWERDOWN (1<<11) /**< Power down mode */ |
| emilmont | 1:0c9d93e2f51c | 449 | #define EMAC_PHY_BMCR_ISOLATE (1<<10) /**< Isolate */ |
| emilmont | 1:0c9d93e2f51c | 450 | #define EMAC_PHY_BMCR_RE_AN (1<<9) /**< Restart auto negotiation */ |
| emilmont | 1:0c9d93e2f51c | 451 | #define EMAC_PHY_BMCR_DUPLEX (1<<8) /**< Duplex mode */ |
| emilmont | 1:0c9d93e2f51c | 452 | |
| emilmont | 1:0c9d93e2f51c | 453 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 454 | * Macro defines for PHY Basic Mode Status Status Register |
| emilmont | 1:0c9d93e2f51c | 455 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 456 | #define EMAC_PHY_BMSR_100BE_T4 (1<<15) /**< 100 base T4 */ |
| emilmont | 1:0c9d93e2f51c | 457 | #define EMAC_PHY_BMSR_100TX_FULL (1<<14) /**< 100 base full duplex */ |
| emilmont | 1:0c9d93e2f51c | 458 | #define EMAC_PHY_BMSR_100TX_HALF (1<<13) /**< 100 base half duplex */ |
| emilmont | 1:0c9d93e2f51c | 459 | #define EMAC_PHY_BMSR_10BE_FULL (1<<12) /**< 10 base T full duplex */ |
| emilmont | 1:0c9d93e2f51c | 460 | #define EMAC_PHY_BMSR_10BE_HALF (1<<11) /**< 10 base T half duplex */ |
| emilmont | 1:0c9d93e2f51c | 461 | #define EMAC_PHY_BMSR_NOPREAM (1<<6) /**< MF Preamable Supress */ |
| emilmont | 1:0c9d93e2f51c | 462 | #define EMAC_PHY_BMSR_AUTO_DONE (1<<5) /**< Auto negotiation complete */ |
| emilmont | 1:0c9d93e2f51c | 463 | #define EMAC_PHY_BMSR_REMOTE_FAULT (1<<4) /**< Remote fault */ |
| emilmont | 1:0c9d93e2f51c | 464 | #define EMAC_PHY_BMSR_NO_AUTO (1<<3) /**< Auto Negotiation ability */ |
| emilmont | 1:0c9d93e2f51c | 465 | #define EMAC_PHY_BMSR_LINK_ESTABLISHED (1<<2) /**< Link status */ |
| emilmont | 1:0c9d93e2f51c | 466 | |
| emilmont | 1:0c9d93e2f51c | 467 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 468 | * Macro defines for PHY Status Register |
| emilmont | 1:0c9d93e2f51c | 469 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 470 | #define EMAC_PHY_SR_REMOTE_FAULT (1<<6) /**< Remote Fault */ |
| emilmont | 1:0c9d93e2f51c | 471 | #define EMAC_PHY_SR_JABBER (1<<5) /**< Jabber detect */ |
| emilmont | 1:0c9d93e2f51c | 472 | #define EMAC_PHY_SR_AUTO_DONE (1<<4) /**< Auto Negotiation complete */ |
| emilmont | 1:0c9d93e2f51c | 473 | #define EMAC_PHY_SR_LOOPBACK (1<<3) /**< Loop back status */ |
| emilmont | 1:0c9d93e2f51c | 474 | #define EMAC_PHY_SR_DUP (1<<2) /**< Duplex status */ |
| emilmont | 1:0c9d93e2f51c | 475 | #define EMAC_PHY_SR_SPEED (1<<1) /**< Speed status */ |
| emilmont | 1:0c9d93e2f51c | 476 | #define EMAC_PHY_SR_LINK (1<<0) /**< Link Status */ |
| emilmont | 1:0c9d93e2f51c | 477 | |
| emilmont | 1:0c9d93e2f51c | 478 | #define EMAC_PHY_FULLD_100M 0x2100 /**< Full Duplex 100Mbit */ |
| emilmont | 1:0c9d93e2f51c | 479 | #define EMAC_PHY_HALFD_100M 0x2000 /**< Half Duplex 100Mbit */ |
| emilmont | 1:0c9d93e2f51c | 480 | #define EMAC_PHY_FULLD_10M 0x0100 /**< Full Duplex 10Mbit */ |
| emilmont | 1:0c9d93e2f51c | 481 | #define EMAC_PHY_HALFD_10M 0x0000 /**< Half Duplex 10MBit */ |
| emilmont | 1:0c9d93e2f51c | 482 | #define EMAC_PHY_AUTO_NEG 0x3000 /**< Select Auto Negotiation */ |
| emilmont | 1:0c9d93e2f51c | 483 | |
| emilmont | 1:0c9d93e2f51c | 484 | #define EMAC_DEF_ADR 0x0100 /**< Default PHY device address */ |
| emilmont | 1:0c9d93e2f51c | 485 | #define EMAC_DP83848C_ID 0x20005C90 /**< PHY Identifier */ |
| emilmont | 1:0c9d93e2f51c | 486 | |
| emilmont | 1:0c9d93e2f51c | 487 | #define EMAC_PHY_SR_100_SPEED ((1<<14)|(1<<13)) |
| emilmont | 1:0c9d93e2f51c | 488 | #define EMAC_PHY_SR_FULL_DUP ((1<<14)|(1<<12)) |
| emilmont | 1:0c9d93e2f51c | 489 | #define EMAC_PHY_BMSR_LINK_STATUS (1<<2) /**< Link status */ |
| emilmont | 1:0c9d93e2f51c | 490 | |
| emilmont | 1:0c9d93e2f51c | 491 | #elif defined(IAR_LPC_1768) |
| emilmont | 1:0c9d93e2f51c | 492 | /* KSZ8721BL PHY definition ------------------------------------------------------------ */ |
| emilmont | 1:0c9d93e2f51c | 493 | /** PHY device reset time out definition */ |
| emilmont | 1:0c9d93e2f51c | 494 | #define EMAC_PHY_RESP_TOUT 0x100000UL |
| emilmont | 1:0c9d93e2f51c | 495 | |
| emilmont | 1:0c9d93e2f51c | 496 | /* ENET Device Revision ID */ |
| emilmont | 1:0c9d93e2f51c | 497 | #define EMAC_OLD_EMAC_MODULE_ID 0x39022000 /**< Rev. ID for first rev '-' */ |
| emilmont | 1:0c9d93e2f51c | 498 | |
| emilmont | 1:0c9d93e2f51c | 499 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 500 | * Macro defines for KSZ8721BL PHY Registers |
| emilmont | 1:0c9d93e2f51c | 501 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 502 | #define EMAC_PHY_REG_BMCR 0x00 /**< Basic Mode Control Register */ |
| emilmont | 1:0c9d93e2f51c | 503 | #define EMAC_PHY_REG_BMSR 0x01 /**< Basic Mode Status Register */ |
| emilmont | 1:0c9d93e2f51c | 504 | #define EMAC_PHY_REG_IDR1 0x02 /**< PHY Identifier 1 */ |
| emilmont | 1:0c9d93e2f51c | 505 | #define EMAC_PHY_REG_IDR2 0x03 /**< PHY Identifier 2 */ |
| emilmont | 1:0c9d93e2f51c | 506 | #define EMAC_PHY_REG_ANAR 0x04 /**< Auto-Negotiation Advertisement */ |
| emilmont | 1:0c9d93e2f51c | 507 | #define EMAC_PHY_REG_ANLPAR 0x05 /**< Auto-Neg. Link Partner Abitily */ |
| emilmont | 1:0c9d93e2f51c | 508 | #define EMAC_PHY_REG_ANER 0x06 /**< Auto-Neg. Expansion Register */ |
| emilmont | 1:0c9d93e2f51c | 509 | #define EMAC_PHY_REG_ANNPTR 0x07 /**< Auto-Neg. Next Page TX */ |
| emilmont | 1:0c9d93e2f51c | 510 | #define EMAC_PHY_REG_LPNPA 0x08 /**< Link Partner Next Page Ability */ |
| emilmont | 1:0c9d93e2f51c | 511 | #define EMAC_PHY_REG_REC 0x15 /**< RXError Counter Register */ |
| emilmont | 1:0c9d93e2f51c | 512 | #define EMAC_PHY_REG_ISC 0x1b /**< Interrupt Control/Status Register */ |
| emilmont | 1:0c9d93e2f51c | 513 | #define EMAC_PHY_REG_100BASE 0x1f /**< 100BASE-TX PHY Control Register */ |
| emilmont | 1:0c9d93e2f51c | 514 | |
| emilmont | 1:0c9d93e2f51c | 515 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 516 | * Macro defines for PHY Basic Mode Control Register |
| emilmont | 1:0c9d93e2f51c | 517 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 518 | #define EMAC_PHY_BMCR_RESET (1<<15) /**< Reset bit */ |
| emilmont | 1:0c9d93e2f51c | 519 | #define EMAC_PHY_BMCR_LOOPBACK (1<<14) /**< Loop back */ |
| emilmont | 1:0c9d93e2f51c | 520 | #define EMAC_PHY_BMCR_SPEED_SEL (1<<13) /**< Speed selection */ |
| emilmont | 1:0c9d93e2f51c | 521 | #define EMAC_PHY_BMCR_AN (1<<12) /**< Auto Negotiation */ |
| emilmont | 1:0c9d93e2f51c | 522 | #define EMAC_PHY_BMCR_POWERDOWN (1<<11) /**< Power down mode */ |
| emilmont | 1:0c9d93e2f51c | 523 | #define EMAC_PHY_BMCR_ISOLATE (1<<10) /**< Isolate */ |
| emilmont | 1:0c9d93e2f51c | 524 | #define EMAC_PHY_BMCR_RE_AN (1<<9) /**< Restart auto negotiation */ |
| emilmont | 1:0c9d93e2f51c | 525 | #define EMAC_PHY_BMCR_DUPLEX (1<<8) /**< Duplex mode */ |
| emilmont | 1:0c9d93e2f51c | 526 | #define EMAC_PHY_BMCR_COLLISION (1<<7) /**< Collision test */ |
| emilmont | 1:0c9d93e2f51c | 527 | #define EMAC_PHY_BMCR_TXDIS (1<<0) /**< Disable transmit */ |
| emilmont | 1:0c9d93e2f51c | 528 | |
| emilmont | 1:0c9d93e2f51c | 529 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 530 | * Macro defines for PHY Basic Mode Status Register |
| emilmont | 1:0c9d93e2f51c | 531 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 532 | #define EMAC_PHY_BMSR_100BE_T4 (1<<15) /**< 100 base T4 */ |
| emilmont | 1:0c9d93e2f51c | 533 | #define EMAC_PHY_BMSR_100TX_FULL (1<<14) /**< 100 base full duplex */ |
| emilmont | 1:0c9d93e2f51c | 534 | #define EMAC_PHY_BMSR_100TX_HALF (1<<13) /**< 100 base half duplex */ |
| emilmont | 1:0c9d93e2f51c | 535 | #define EMAC_PHY_BMSR_10BE_FULL (1<<12) /**< 10 base T full duplex */ |
| emilmont | 1:0c9d93e2f51c | 536 | #define EMAC_PHY_BMSR_10BE_HALF (1<<11) /**< 10 base T half duplex */ |
| emilmont | 1:0c9d93e2f51c | 537 | #define EMAC_PHY_BMSR_NOPREAM (1<<6) /**< MF Preamable Supress */ |
| emilmont | 1:0c9d93e2f51c | 538 | #define EMAC_PHY_BMSR_AUTO_DONE (1<<5) /**< Auto negotiation complete */ |
| emilmont | 1:0c9d93e2f51c | 539 | #define EMAC_PHY_BMSR_REMOTE_FAULT (1<<4) /**< Remote fault */ |
| emilmont | 1:0c9d93e2f51c | 540 | #define EMAC_PHY_BMSR_NO_AUTO (1<<3) /**< Auto Negotiation ability */ |
| emilmont | 1:0c9d93e2f51c | 541 | #define EMAC_PHY_BMSR_LINK_STATUS (1<<2) /**< Link status */ |
| emilmont | 1:0c9d93e2f51c | 542 | #define EMAC_PHY_BMSR_JABBER_DETECT (1<<1) /**< Jabber detect */ |
| emilmont | 1:0c9d93e2f51c | 543 | #define EMAC_PHY_BMSR_EXTEND (1<<0) /**< Extended support */ |
| emilmont | 1:0c9d93e2f51c | 544 | |
| emilmont | 1:0c9d93e2f51c | 545 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 546 | * Macro defines for PHY Identifier |
| emilmont | 1:0c9d93e2f51c | 547 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 548 | /* PHY Identifier 1 bitmap definitions */ |
| emilmont | 1:0c9d93e2f51c | 549 | #define EMAC_PHY_IDR1(n) (n & 0xFFFF) /**< PHY ID1 Number */ |
| emilmont | 1:0c9d93e2f51c | 550 | |
| emilmont | 1:0c9d93e2f51c | 551 | /* PHY Identifier 2 bitmap definitions */ |
| emilmont | 1:0c9d93e2f51c | 552 | #define EMAC_PHY_IDR2(n) (n & 0xFFFF) /**< PHY ID2 Number */ |
| emilmont | 1:0c9d93e2f51c | 553 | |
| emilmont | 1:0c9d93e2f51c | 554 | /*********************************************************************//** |
| emilmont | 1:0c9d93e2f51c | 555 | * Macro defines for Auto-Negotiation Advertisement |
| emilmont | 1:0c9d93e2f51c | 556 | **********************************************************************/ |
| emilmont | 1:0c9d93e2f51c | 557 | #define EMAC_PHY_AN_NEXTPAGE (1<<15) /**< Next page capable */ |
| emilmont | 1:0c9d93e2f51c | 558 | #define EMAC_PHY_AN_REMOTE_FAULT (1<<13) /**< Remote Fault support */ |
| emilmont | 1:0c9d93e2f51c | 559 | #define EMAC_PHY_AN_PAUSE (1<<10) /**< Pause support */ |
| emilmont | 1:0c9d93e2f51c | 560 | #define EMAC_PHY_AN_100BASE_T4 (1<<9) /**< T4 capable */ |
| emilmont | 1:0c9d93e2f51c | 561 | #define EMAC_PHY_AN_100BASE_TX_FD (1<<8) /**< TX with Full-duplex capable */ |
| emilmont | 1:0c9d93e2f51c | 562 | #define EMAC_PHY_AN_100BASE_TX (1<<7) /**< TX capable */ |
| emilmont | 1:0c9d93e2f51c | 563 | #define EMAC_PHY_AN_10BASE_T_FD (1<<6) /**< 10Mbps with full-duplex capable */ |
| emilmont | 1:0c9d93e2f51c | 564 | #define EMAC_PHY_AN_10BASE_T (1<<5) /**< 10Mbps capable */ |
| emilmont | 1:0c9d93e2f51c | 565 | #define EMAC_PHY_AN_FIELD(n) (n & 0x1F) /**< Selector Field */ |
| emilmont | 1:0c9d93e2f51c | 566 | |
| emilmont | 1:0c9d93e2f51c | 567 | #define EMAC_PHY_FULLD_100M 0x2100 /**< Full Duplex 100Mbit */ |
| emilmont | 1:0c9d93e2f51c | 568 | #define EMAC_PHY_HALFD_100M 0x2000 /**< Half Duplex 100Mbit */ |
| emilmont | 1:0c9d93e2f51c | 569 | #define EMAC_PHY_FULLD_10M 0x0100 /**< Full Duplex 10Mbit */ |
| emilmont | 1:0c9d93e2f51c | 570 | #define EMAC_PHY_HALFD_10M 0x0000 /**< Half Duplex 10MBit */ |
| emilmont | 1:0c9d93e2f51c | 571 | #define EMAC_PHY_AUTO_NEG 0x3000 /**< Select Auto Negotiation */ |
| emilmont | 1:0c9d93e2f51c | 572 | |
| emilmont | 1:0c9d93e2f51c | 573 | #define EMAC_PHY_SR_100_SPEED ((1<<14)|(1<<13)) |
| emilmont | 1:0c9d93e2f51c | 574 | #define EMAC_PHY_SR_FULL_DUP ((1<<14)|(1<<12)) |
| emilmont | 1:0c9d93e2f51c | 575 | |
| emilmont | 1:0c9d93e2f51c | 576 | #define EMAC_DEF_ADR (0x01<<8) /**< Default PHY device address */ |
| emilmont | 1:0c9d93e2f51c | 577 | #define EMAC_KSZ8721BL_ID ((0x22 << 16) | 0x1619 ) /**< PHY Identifier */ |
| emilmont | 1:0c9d93e2f51c | 578 | #endif |
| emilmont | 1:0c9d93e2f51c | 579 | |
| emilmont | 1:0c9d93e2f51c | 580 | /** |
| emilmont | 1:0c9d93e2f51c | 581 | * @} |
| emilmont | 1:0c9d93e2f51c | 582 | */ |
| emilmont | 1:0c9d93e2f51c | 583 | |
| emilmont | 1:0c9d93e2f51c | 584 | |
| emilmont | 1:0c9d93e2f51c | 585 | /* Public Types --------------------------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 586 | /** @defgroup EMAC_Public_Types EMAC Public Types |
| emilmont | 1:0c9d93e2f51c | 587 | * @{ |
| emilmont | 1:0c9d93e2f51c | 588 | */ |
| emilmont | 1:0c9d93e2f51c | 589 | |
| emilmont | 1:0c9d93e2f51c | 590 | /* Descriptor and status formats ---------------------------------------------- */ |
| emilmont | 1:0c9d93e2f51c | 591 | |
| emilmont | 1:0c9d93e2f51c | 592 | /** |
| emilmont | 1:0c9d93e2f51c | 593 | * @brief RX Descriptor structure type definition |
| emilmont | 1:0c9d93e2f51c | 594 | */ |
| emilmont | 1:0c9d93e2f51c | 595 | typedef struct { |
| emilmont | 1:0c9d93e2f51c | 596 | uint32_t Packet; /**< Receive Packet Descriptor */ |
| emilmont | 1:0c9d93e2f51c | 597 | uint32_t Ctrl; /**< Receive Control Descriptor */ |
| emilmont | 1:0c9d93e2f51c | 598 | } RX_Desc; |
| emilmont | 1:0c9d93e2f51c | 599 | |
| emilmont | 1:0c9d93e2f51c | 600 | /** |
| emilmont | 1:0c9d93e2f51c | 601 | * @brief RX Status structure type definition |
| emilmont | 1:0c9d93e2f51c | 602 | */ |
| emilmont | 1:0c9d93e2f51c | 603 | typedef struct { |
| emilmont | 1:0c9d93e2f51c | 604 | uint32_t Info; /**< Receive Information Status */ |
| emilmont | 1:0c9d93e2f51c | 605 | uint32_t HashCRC; /**< Receive Hash CRC Status */ |
| emilmont | 1:0c9d93e2f51c | 606 | } RX_Stat; |
| emilmont | 1:0c9d93e2f51c | 607 | |
| emilmont | 1:0c9d93e2f51c | 608 | /** |
| emilmont | 1:0c9d93e2f51c | 609 | * @brief TX Descriptor structure type definition |
| emilmont | 1:0c9d93e2f51c | 610 | */ |
| emilmont | 1:0c9d93e2f51c | 611 | typedef struct { |
| emilmont | 1:0c9d93e2f51c | 612 | uint32_t Packet; /**< Transmit Packet Descriptor */ |
| emilmont | 1:0c9d93e2f51c | 613 | uint32_t Ctrl; /**< Transmit Control Descriptor */ |
| emilmont | 1:0c9d93e2f51c | 614 | } TX_Desc; |
| emilmont | 1:0c9d93e2f51c | 615 | |
| emilmont | 1:0c9d93e2f51c | 616 | /** |
| emilmont | 1:0c9d93e2f51c | 617 | * @brief TX Status structure type definition |
| emilmont | 1:0c9d93e2f51c | 618 | */ |
| emilmont | 1:0c9d93e2f51c | 619 | typedef struct { |
| emilmont | 1:0c9d93e2f51c | 620 | uint32_t Info; /**< Transmit Information Status */ |
| emilmont | 1:0c9d93e2f51c | 621 | } TX_Stat; |
| emilmont | 1:0c9d93e2f51c | 622 | |
| emilmont | 1:0c9d93e2f51c | 623 | |
| emilmont | 1:0c9d93e2f51c | 624 | /** |
| emilmont | 1:0c9d93e2f51c | 625 | * @brief TX Data Buffer structure definition |
| emilmont | 1:0c9d93e2f51c | 626 | */ |
| emilmont | 1:0c9d93e2f51c | 627 | typedef struct { |
| emilmont | 1:0c9d93e2f51c | 628 | uint32_t ulDataLen; /**< Data length */ |
| emilmont | 1:0c9d93e2f51c | 629 | uint32_t *pbDataBuf; /**< A word-align data pointer to data buffer */ |
| emilmont | 1:0c9d93e2f51c | 630 | } EMAC_PACKETBUF_Type; |
| emilmont | 1:0c9d93e2f51c | 631 | |
| emilmont | 1:0c9d93e2f51c | 632 | /** |
| emilmont | 1:0c9d93e2f51c | 633 | * @brief EMAC configuration structure definition |
| emilmont | 1:0c9d93e2f51c | 634 | */ |
| emilmont | 1:0c9d93e2f51c | 635 | typedef struct { |
| emilmont | 1:0c9d93e2f51c | 636 | uint32_t Mode; /**< Supported EMAC PHY device speed, should be one of the following: |
| emilmont | 1:0c9d93e2f51c | 637 | - EMAC_MODE_AUTO |
| emilmont | 1:0c9d93e2f51c | 638 | - EMAC_MODE_10M_FULL |
| emilmont | 1:0c9d93e2f51c | 639 | - EMAC_MODE_10M_HALF |
| emilmont | 1:0c9d93e2f51c | 640 | - EMAC_MODE_100M_FULL |
| emilmont | 1:0c9d93e2f51c | 641 | - EMAC_MODE_100M_HALF |
| emilmont | 1:0c9d93e2f51c | 642 | */ |
| emilmont | 1:0c9d93e2f51c | 643 | uint8_t *pbEMAC_Addr; /**< Pointer to EMAC Station address that contains 6-bytes |
| emilmont | 1:0c9d93e2f51c | 644 | of MAC address, it must be sorted in order (bEMAC_Addr[0]..[5]) |
| emilmont | 1:0c9d93e2f51c | 645 | */ |
| emilmont | 1:0c9d93e2f51c | 646 | } EMAC_CFG_Type; |
| emilmont | 1:0c9d93e2f51c | 647 | |
| emilmont | 1:0c9d93e2f51c | 648 | /** Ethernet block power/clock control bit*/ |
| emilmont | 1:0c9d93e2f51c | 649 | #define CLKPWR_PCONP_PCENET ((uint32_t)(1<<30)) |
| emilmont | 1:0c9d93e2f51c | 650 | |
| emilmont | 1:0c9d93e2f51c | 651 | #ifdef __cplusplus |
| emilmont | 1:0c9d93e2f51c | 652 | } |
| emilmont | 1:0c9d93e2f51c | 653 | #endif |
| emilmont | 1:0c9d93e2f51c | 654 | |
| emilmont | 1:0c9d93e2f51c | 655 | #endif /* LPC17XX_EMAC_H_ */ |
| emilmont | 1:0c9d93e2f51c | 656 | |
| emilmont | 1:0c9d93e2f51c | 657 | /** |
| emilmont | 1:0c9d93e2f51c | 658 | * @} |
| emilmont | 1:0c9d93e2f51c | 659 | */ |
| emilmont | 1:0c9d93e2f51c | 660 | |
| emilmont | 1:0c9d93e2f51c | 661 | /* --------------------------------- End Of File ------------------------------ */ |