Diff: examples/src/peer_to_peer_example.cpp

Revision:

11:d2e31743433a

Child:

12:ec9768677cea

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/examples/src/peer_to_peer_example.cpp	Tue Oct 11 11:49:56 2016 -0500
@@ -0,0 +1,211 @@
+#include "dot_util.h"
+#include "mDotEvent.h"
+ 
+#if ACTIVE_EXAMPLE == PEER_TO_PEER_EXAMPLE
+
+/////////////////////////////////////////////////////////////
+// * these options must match between the two devices in   //
+//   order for communication to be successful
+/////////////////////////////////////////////////////////////
+static uint8_t network_address[] = { 0x01, 0x02, 0x03, 0x04 };
+static uint8_t network_session_key[] = { 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04 };
+static uint8_t data_session_key[] = { 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04, 0x01, 0x02, 0x03, 0x04 };
+
+mDot* dot = NULL;
+
+Serial pc(USBTX, USBRX);
+
+#if defined(TARGET_XDOT_L151CC)
+I2C i2c(I2C_SDA, I2C_SCL);
+ISL29011 lux(i2c);
+#else
+AnalogIn lux(XBEE_AD0);
+#endif
+
+// Custom event handler for receiving Class C packets
+class RadioEvent : public mDotEvent
+{
+ 
+public:
+    RadioEvent() {}
+ 
+    virtual ~RadioEvent() {}
+ 
+    /*!
+     * MAC layer event callback prototype.
+     *
+     * \param [IN] flags Bit field indicating the MAC events occurred
+     * \param [IN] info  Details about MAC events occurred
+     */
+    virtual void MacEvent(LoRaMacEventFlags* flags, LoRaMacEventInfo* info) {
+ 
+        if (mts::MTSLog::getLogLevel() == mts::MTSLog::TRACE_LEVEL) {
+            std::string msg = "OK";
+            switch (info->Status) {
+                case LORAMAC_EVENT_INFO_STATUS_ERROR:
+                    msg = "ERROR";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_TX_TIMEOUT:
+                    msg = "TX_TIMEOUT";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_RX_TIMEOUT:
+                    msg = "RX_TIMEOUT";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_RX_ERROR:
+                    msg = "RX_ERROR";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_JOIN_FAIL:
+                    msg = "JOIN_FAIL";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_DOWNLINK_FAIL:
+                    msg = "DOWNLINK_FAIL";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_ADDRESS_FAIL:
+                    msg = "ADDRESS_FAIL";
+                    break;
+                case LORAMAC_EVENT_INFO_STATUS_MIC_FAIL:
+                    msg = "MIC_FAIL";
+                    break;
+                default:
+                    break;
+            }
+            logTrace("Event: %s", msg.c_str());
+ 
+            logTrace("Flags Tx: %d Rx: %d RxData: %d RxSlot: %d LinkCheck: %d JoinAccept: %d",
+                     flags->Bits.Tx, flags->Bits.Rx, flags->Bits.RxData, flags->Bits.RxSlot, flags->Bits.LinkCheck, flags->Bits.JoinAccept);
+            logTrace("Info: Status: %d ACK: %d Retries: %d TxDR: %d RxPort: %d RxSize: %d RSSI: %d SNR: %d Energy: %d Margin: %d Gateways: %d",
+                     info->Status, info->TxAckReceived, info->TxNbRetries, info->TxDatarate, info->RxPort, info->RxBufferSize,
+                     info->RxRssi, info->RxSnr, info->Energy, info->DemodMargin, info->NbGateways);
+        }
+ 
+        if (flags->Bits.Rx) {
+            
+            logDebug("Rx %d bytes", info->RxBufferSize);
+            if (info->RxBufferSize > 0) {
+                // print RX data as hexadecimal
+                printf("Rx data: %s\r\n", mts::Text::bin2hexString(info->RxBuffer, info->RxBufferSize).c_str());
+
+                // print RX data as string
+                /*
+                pc.printf("Rx data: ");
+                for (int i = 0; i < info->RxBufferSize; i++) {
+                    pc.putc(info->RxBuffer[i]);
+                }
+                pc.printf("\r\n");
+                */
+            }
+        }
+    }
+};
+
+int main() {
+    RadioEvent events;
+    uint32_t tx_frequency;
+    uint8_t tx_datarate;
+    uint8_t tx_power;
+    uint8_t frequency_band;
+
+    pc.baud(115200);
+
+    mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL);
+    
+    dot = mDot::getInstance();
+
+    // make sure library logging is turned on
+    dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
+
+    // attach the custom events handler
+    dot->setEvents(&events);
+
+    // update configuration if necessary
+    if (dot->getJoinMode() != mDot::PEER_TO_PEER) {
+        logInfo("changing network join mode to PEER_TO_PEER");
+        if (dot->setJoinMode(mDot::PEER_TO_PEER) != mDot::MDOT_OK) {
+            logError("failed to set network join mode to PEER_TO_PEER");
+        }
+    }
+    frequency_band = dot->getFrequencyBand();
+    switch (frequency_band) {
+        case mDot::FB_EU868:
+            // 250kHz channels achieve higher throughput
+            // DR6 : SF7 @ 250kHz
+            // DR0 - DR5 (125kHz channels) available but much slower
+            tx_frequency = 869850000;
+            tx_datarate = mDot::DR6;
+            // the 869850000 frequency is 100% duty cycle if the total power is under 7 dBm - tx power 4 + antenna gain 3 = 7
+            tx_power = 4;
+            break;
+        case mDot::FB_US915:
+        case mDot::FB_AU915:
+        default:
+            // 500kHz channels achieve highest throughput
+            // DR8 : SF12 @ 500kHz
+            // DR9 : SF11 @ 500kHz
+            // DR10 : SF10 @ 500kHz
+            // DR11 : SF9 @ 500kHz
+            // DR12 : SF8 @ 500kHz
+            // DR13 : SF7 @ 500kHz
+            // DR0 - DR3 (125kHz channels) available but much slower
+            tx_frequency = 915500000;
+            tx_datarate = mDot::DR13;
+            // 915 bands have no duty cycle restrictions, set tx power to max
+            tx_power = 20;
+            break;
+    }
+    // in PEER_TO_PEER mode there is no join request/response transaction
+    // as long as both Dots are configured correctly, they should be able to communicate
+    update_peer_to_peer_config(network_address, network_session_key, data_session_key, tx_frequency, tx_datarate, tx_power);
+
+    // save changes to configuration
+    logInfo("saving configuration");
+    if (!dot->saveConfig()) {
+        logError("failed to save configuration");
+    }
+
+    // display configuration
+    display_config();
+
+#if defined(TARGET_XDOT_L151CC)
+    // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range
+    lux.setMode(ISL29011::ALS_CONT);
+    lux.setResolution(ISL29011::ADC_16BIT);
+    lux.setRange(ISL29011::RNG_64000);
+#endif
+
+    while (true) {
+        uint16_t light;
+        std::vector<uint8_t> tx_data;
+
+        // join network if not joined
+        if (!dot->getNetworkJoinStatus()) {
+            join_network();
+        }
+
+#if defined(TARGET_XDOT_L151CC)
+        // get the latest light sample and send it to the gateway
+        light = lux.getData();
+        tx_data.push_back((light >> 8) & 0xFF);
+        tx_data.push_back(light & 0xFF);
+        logInfo("light: %lu [0x%04X]", light, light);
+        send_data(tx_data);
+#else 
+        // get some dummy data and send it to the gateway
+        light = lux.read_u16();
+        tx_data.push_back((light >> 8) & 0xFF);
+        tx_data.push_back(light & 0xFF);
+        logInfo("light: %lu [0x%04X]", light, light);
+        send_data(tx_data);
+#endif
+
+        // the Dot can't sleep in PEER_TO_PEER mode
+        // it must be waiting for data from the other Dot
+        // send data every 5 seconds
+        logInfo("waiting for 5s");
+        wait(5);
+    }
+ 
+    return 0;
+}
+
+#endif
+