Diff: main.cpp

Revision:

3:e4783c57bcc0

Parent:

2:0bc5af6c7ebf

Child:

4:f5a78245f2d0

diff -r 0bc5af6c7ebf -r e4783c57bcc0 main.cpp
--- a/main.cpp	Wed Aug 17 09:58:13 2016 +0000
+++ b/main.cpp	Mon Aug 21 02:40:56 2017 +0000
@@ -1,17 +1,68 @@
-#include "mbed.h"
+#include "ADXL345_I2C.h"
 
-DigitalOut red(LED1);
-DigitalOut blue(LED2);
-DigitalOut green(LED3);
-int i;
+ ADXL345_I2C accelerometer(I2C_SDA, I2C_SCL);
+ Serial pc(USBTX, USBRX);
 
-int main() {
-    while(1) {
-        for (i=1; i<7; i++) {
-            red = i & 1;
-            blue = i & 2;
-            green = i & 4;
-            wait(0.2);
-        }
-    }
-}
+ int main() {
+     pc.baud(115200);
+     int readings[3] = {0, 0, 0};
+     
+     pc.printf("Starting ADXL345 test...\r\n");
+     wait(.001);
+     pc.printf("Device ID is: 0x%02x\r\n", accelerometer.getDeviceID());
+    wait(.001);
+    
+    restart:
+    
+     // These are here to test whether any of the initialization fails. It will print the failure
+    if (accelerometer.setPowerControl(0x00)){
+         pc.printf("didn't intitialize power control\r\n"); 
+         return 0;  }
+     wait(.001);
+     
+     //Full resolution, +/-16g, 4mg/LSB.
+     if(accelerometer.setDataFormatControl(0x0B)){
+     //Full resolution, +/-2g, 4mg/LSB.
+     //if(accelerometer.setDataFormatControl(0x08)){
+        pc.printf("didn't set data format\r\n");
+        return 0;  }
+     wait(.001);
+     
+     //3.2kHz data rate.
+     if(accelerometer.setDataRate(ADXL345_3200HZ)){
+        pc.printf("didn't set data rate\r\n");
+        return 0;    }
+     wait(.001);
+     
+     //Measurement mode.
+     
+     if(accelerometer.setPowerControl(MeasurementMode)) {
+        pc.printf("didn't set the power control to measurement\r\n"); 
+        return 0;   } 
+
+     pc.printf("x-axis, y-axis, z-axis\r\n");    
+ 
+     while (1) {
+         int error_count=0;
+     
+         wait(0.01);
+         
+         accelerometer.getOutput(readings);
+         if (( 17601 == readings[0] ) ||  ( 17601 == readings[1] ) || ( 17601 == readings[2] ))
+            {
+            error_count++;
+            if (error_count>10)
+                {
+                accelerometer.setPowerControl(0);
+                pc.printf("Sensor Halt!\r\n"); 
+                goto restart;
+                }
+            }
+        else
+            {
+            error_count = 0;                 
+            pc.printf("%i, %i, %i\r\n", (int16_t)readings[0], (int16_t)readings[1], (int16_t)readings[2]);
+            }
+     }
+ 
+ }