FOURNET Olivier / Mbed 2 deprecated HTTP_SDCard_File_Server_WIZwiki-W7500

HTTP_SDCard_File_Server_WIZwiki-W7500 avec gestion des extensions MIME

Dependencies:   SDFileSystem WIZnetInterface mbed STATIC_COLORS

Fork of HTTP_SDCard_File_Server_WIZwiki-W7500 by WIZnet

WIZnet WIZwiki-W7500

/media/uploads/Fo170/wizwiki-w7500_usb_connected.jpg

/media/uploads/Fo170/wiznet_logo_110x37.png http://www.wiznet.co.kr/product-item/w7500/

Windows serial configuration https://developer.mbed.org/handbook/Windows-serial-configuration https://developer.mbed.org/media/downloads/drivers/mbedWinSerial_16466.exe

How to write the firmware into WIZwiki-W7500 https://developer.mbed.org/teams/WIZnet/wiki/How-to-write-the-firmware-into-WIZwiki-W

Data Output using Serial Port https://blog.wiznettechnology.com/2015/08/14/wiznet-wizwiki-w7500-tutorial-exercise-2-data-output-using-serial-port/ http://wizwiki.net/wiki/doku.php?id=products:w7500:peripherals:uart

SDFileSystem Instanciation

SDFileSystem sd(PB_3, PB_2, PB_1, PB_0, "sd"); WIZwiki-W7500

/media/uploads/Fo170/wizwiki_w7500_spi_sch.png

Ethernet Initialization

eth.init () uses the eth.init (MAC) If you use DHCP instead, and when using a Static IP uses eth.init ((uint8_t *) MAC, IP, MASK, GATEWAY). This section uses a static IP.

  1. define MAC "\x\x\x\x\x\x" Should be Replaced with your MAC
  2. define IP "192.168.77.100" Should belong with your lan.
  3. define MASK "255.255.255.0"
  4. define GATEWAY "192.168.77.1"

eth.init((uint8_t*)MAC); Use DHCP for WIZnetInterface eth.init((uint8_t*)MAC,IP,MASK,GATEWAY); IP,mask,Gateway

Also watch its pages, the initial contributor to the project For Import the example https://developer.mbed.org/teams/WIZnet/code/HTTP_SDCard_File_Server_WIZwiki-W7500/

Wiki on ARMmbed https://developer.mbed.org/teams/WIZnet/code/HTTP_SDCard_File_Server_WIZwiki-W7500/wiki/HTTP_SDCard_File_Server_WIZwiki-W7500

/media/uploads/Fo170/wp_20160508_008.jpg

WIZwiki_W7500 LED RGB :

/media/uploads/Fo170/wizwiki_w7500_led_rgb.png

LED1 = LED_RED = LEDR = PC_8

LED2 = LED_GREEN = LEDG = PC_9

LED3 = LED_BLUE = LEDB = PC_5

LED4 = LED_BLUE

Diff: main.cpp

Revision:
5:27b09a0f3fb6
Parent:
3:4f71a37a1ed2
Child:
6:ca17ce165ebc
--- a/main.cpp	Sat May 10 02:25:42 2014 +0000
+++ b/main.cpp	Wed Aug 06 03:35:59 2014 +0000
@@ -12,8 +12,8 @@
 
 Serial uart(USBTX, USBRX);
 
-//SDFileSystem sd(p5, p6, p7, p8, "sd"); // LPC1768 MBD2PMD
-SDFileSystem sd(P0_18, P0_17, P0_15, P0_16, "sd"); // Seeeduino Arch Pro SPI2SD
+SDFileSystem sd(p5, p6, p7, p8, "sd"); // LPC1768 MBD2PMD
+//SDFileSystem sd(P0_18, P0_17, P0_15, P0_16, "sd"); // Seeeduino Arch Pro SPI2SD
 
 EthernetInterface eth;
 TCPSocketServer server;
@@ -84,9 +84,10 @@
 {
 //    Serial Interface eth;
     uart.baud(115200);
-    uart.printf("RAPM Serial Started\n");
+    uart.printf("Initializing\n");
 
 //    Check File System
+    uart.printf("Checking File System\n");
     DIR *d = opendir("/sd/");
     if (d != NULL) {
         uart.printf("SD Card Present\n");
@@ -95,14 +96,16 @@
     }
 
 //    EthernetInterface eth;
+    uart.printf("Initializing Ethernet\n");
     eth.init(); //Use DHCP
+    uart.printf("Connecting\n");
     eth.connect();
     uart.printf("IP Address is %s\n", eth.getIPAddress());
 
 //    TCPSocketServer server;
     server.bind(HTTPD_SERVER_PORT);
     server.listen();
-    uart.printf("RAPM Server Listening\n");
+    uart.printf("Server Listening\n");
 
     while (true) {
         uart.printf("\nWait for new connection...\r\n");