no comment
Dependents: MAX30100_FirstTry MAX30100_V04
Fork of MAX30100 by
Diff: MAX30100.cpp
- Revision:
- 0:c8da8e2afe09
- Child:
- 1:e96604eb8062
diff -r 000000000000 -r c8da8e2afe09 MAX30100.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MAX30100.cpp Mon Mar 27 23:21:28 2017 +0000 @@ -0,0 +1,128 @@ +/* + Library for the Maxim MAX30100 pulse oximetry system + Connor Huffine/Kontakt + February 2016 +*/ + +#include "mbed.h" +#include "MAX30100.h" +#include "I2C_Driver.h" +#include "wire.h" + +//TwoWire wire1 = TwoWire(NRF_TWI0); + +MAX30100::MAX30100(){ + +} + +void MAX30100::setLEDs(pulseWidth pw, ledCurrent red, ledCurrent ir){ + uint8_t reg = I2CreadByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG); + reg = reg & 0xFC; // Set LED_PW to 00 + I2CwriteByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG, reg | pw); // Mask LED_PW + I2CwriteByte(MAX30100_ADDRESS, MAX30100_LED_CONFIG, (red<<4) | ir); // write LED configs +} + +void MAX30100::setSPO2(sampleRate sr){ + uint8_t reg = I2CreadByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG); + reg = reg & 0xE3; // Set SPO2_SR to 000 + I2CwriteByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG, reg | (sr<<2)); // Mask SPO2_SR + reg = I2CreadByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG); + reg = reg & 0xf8; // Set Mode to 000 + I2CwriteByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG, reg | 0x03); // Mask MODE +} + +int MAX30100::getNumSamp(void){ + uint8_t wrPtr = I2CreadByte(MAX30100_ADDRESS, MAX30100_FIFO_WR_PTR); + uint8_t rdPtr = I2CreadByte(MAX30100_ADDRESS, MAX30100_FIFO_RD_PTR); + return (abs( 16 + wrPtr - rdPtr ) % 16); +} + +void MAX30100::readSensor(void){ + uint8_t temp[4] = {0}; // Temporary buffer for read values + I2CreadBytes(MAX30100_ADDRESS, MAX30100_FIFO_DATA, &temp[0], 4); // Read four times from the FIFO + IR = (temp[0]<<8) | temp[1]; // Combine values to get the actual number + RED = (temp[2]<<8) | temp[3]; // Combine values to get the actual number +} + +void MAX30100::shutdown(void){ + uint8_t reg = I2CreadByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG); // Get the current register + I2CwriteByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG, reg | 0x80); // mask the SHDN bit +} + +void MAX30100::reset(void){ + uint8_t reg = I2CreadByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG); // Get the current register + I2CwriteByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG, reg | 0x40); // mask the RESET bit +} + +void MAX30100::startup(void){ + uint8_t reg = I2CreadByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG); // Get the current register + I2CwriteByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG, reg & 0x7F); // mask the SHDN bit +} + +int MAX30100::getRevID(void){ + return I2CreadByte(MAX30100_ADDRESS, MAX30100_REV_ID); +} + +int MAX30100::getPartID(void){ + return I2CreadByte(MAX30100_ADDRESS, MAX30100_PART_ID); +} + +void MAX30100::begin(pulseWidth pw, ledCurrent ir, sampleRate sr){ + I2CwriteByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG, 0x03); // Heart rate only + I2CwriteByte(MAX30100_ADDRESS, MAX30100_LED_CONFIG, 0XFF); + I2CwriteByte(MAX30100_ADDRESS, MAX30100_LED_CONFIG, ir<<4|0x0f); + I2CwriteByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG, (sr<<2)|pw); +} + +//void MAX30100::printRegisters(void){ +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_INT_STATUS), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_INT_ENABLE), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_FIFO_WR_PTR), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_OVRFLOW_CTR), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_FIFO_RD_PTR), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_FIFO_DATA), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_MODE_CONFIG), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_SPO2_CONFIG), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_LED_CONFIG), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_TEMP_INTG), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_TEMP_FRAC), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_REV_ID), BIN); +// Serial.println(I2CreadByte(MAX30100_ADDRESS, MAX30100_PART_ID), BIN); +//} + +// Wire.h read and write protocols +void MAX30100::I2CwriteByte(uint8_t address, uint8_t subAddress, uint8_t data) +{ + //wire1.beginTransmission(address); // Initialize the Tx buffer + //wire1.write(subAddress); // Put slave register address in Tx buffer + //wire1.write(data); // Put data in Tx buffer + //wire1.endTransmission(); // Send the Tx buffer + write_i2c(subAddress, &data, 1, 0xAE); +} + +uint8_t MAX30100::I2CreadByte(uint8_t address, uint8_t subAddress) +{ + uint8_t data; // `data` will store the register data + //wire.beginTransmission(address); // Initialize the Tx buffer + //wire.write(subAddress); // Put slave register address in Tx buffer + //wire.endTransmission(false); // Send the Tx buffer, but send a restart to keep connection alive + //wire.requestFrom(address, (uint8_t) 1); // Read one byte from slave register address + //data = Wire.read(); // Fill Rx buffer with result + read_i2c(subAddress, &data, 1, 0xAE); + return data; // Return data read from slave register +} + +void MAX30100::I2CreadBytes(uint8_t address, uint8_t subAddress, uint8_t * dest, uint8_t count) +{ + //Wire.beginTransmission(address); // Initialize the Tx buffer + // Next send the register to be read. OR with 0x80 to indicate multi-read. + //Wire.write(subAddress); // Put slave register address in Tx buffer + //Wire.endTransmission(false); // Send the Tx buffer, but send a restart to keep connection alive + //uint8_t i = 0; + //Wire.requestFrom(address, count); // Read bytes from slave register address + //while (Wire.available()) + //{ + // dest[i++] = Wire.read(); // Put read results in the Rx buffer + //} + read_i2c(subAddress, dest, count, 0xAE); +} \ No newline at end of file