this library has few changes from the original library, for effects of this work.
FATFileSystem/ChaN/diskio.h
- Committer:
- FannyCalle
- Date:
- 2018-05-21
- Revision:
- 0:8214896432e0
File content as of revision 0:8214896432e0:
/*-----------------------------------------------------------------------/ / Low level disk interface modlue include file (C)ChaN, 2014 / /-----------------------------------------------------------------------*/ #ifndef _DISKIO_DEFINED #define _DISKIO_DEFINED #ifdef __cplusplus extern "C" { #endif #define _USE_WRITE 1 /* 1: Enable disk_write function */ #define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */ #include "integer.h" /* Status of Disk Functions */ typedef BYTE DSTATUS; /* Results of Disk Functions */ typedef enum { RES_OK = 0, /* 0: Successful */ RES_ERROR, /* 1: R/W Error */ RES_WRPRT, /* 2: Write Protected */ RES_NOTRDY, /* 3: Not Ready */ RES_PARERR /* 4: Invalid Parameter */ } DRESULT; /*---------------------------------------*/ /* Prototypes for disk control functions */ DSTATUS disk_initialize (BYTE pdrv); DSTATUS disk_status (BYTE pdrv); DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count); DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count); DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff); /* Disk Status Bits (DSTATUS) */ #define STA_NOINIT 0x01 /* Drive not initialized */ #define STA_NODISK 0x02 /* No medium in the drive */ #define STA_PROTECT 0x04 /* Write protected */ /* Command code for disk_ioctrl fucntion */ /* Generic command (Used by FatFs) */ #define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */ #define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */ #define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */ #define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */ #define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */ /* Generic command (Not used by FatFs) */ #define CTRL_POWER 5 /* Get/Set power status */ #define CTRL_LOCK 6 /* Lock/Unlock media removal */ #define CTRL_EJECT 7 /* Eject media */ #define CTRL_FORMAT 8 /* Create physical format on the media */ /* MMC/SDC specific ioctl command */ #define MMC_GET_TYPE 10 /* Get card type */ #define MMC_GET_CSD 11 /* Get CSD */ #define MMC_GET_CID 12 /* Get CID */ #define MMC_GET_OCR 13 /* Get OCR */ #define MMC_GET_SDSTAT 14 /* Get SD status */ /* ATA/CF specific ioctl command */ #define ATA_GET_REV 20 /* Get F/W revision */ #define ATA_GET_MODEL 21 /* Get model name */ #define ATA_GET_SN 22 /* Get serial number */ #ifdef __cplusplus } #endif #endif