Esteban Lage
Reloj con programacion de alarmas con control remoto
Dependencies: Debounced Pulse1 QEI RTC-DS1307 TextLCD mbed
Revision 0:60db34a2735c, committed 2018-06-02
- Comitter:
- EstebanLage
- Date:
- Sat Jun 02 15:54:16 2018 +0000
- Commit message:
- Tarea3
Changed in this revision
diff -r 000000000000 -r 60db34a2735c 2main.cpp
diff -r 000000000000 -r 60db34a2735c Debounced.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Debounced.lib Sat Jun 02 15:54:16 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/WarwickRacing/code/Debounced/#8992c13bbb9b
diff -r 000000000000 -r 60db34a2735c Main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Main.cpp Sat Jun 02 15:54:16 2018 +0000
@@ -0,0 +1,561 @@
+#include "mbed.h"
+#include "DebouncedIn.h"
+#include "TextLCD.h"
+#include "QEI.h"
+#include "Rtc_Ds1307.h"
+#include <Pulse1.h>
+
+TextLCD lcd(PTB0, PTB1, PTB2, PTB3, PTC2, PTC1); // rs, e, d4, d5, d6, d7
+Rtc_Ds1307 rtc(PTE0, PTE1);
+QEI wheel (PTD7, PTD6, NC, 30);
+DebouncedIn button_enco(PTC5);
+Serial pc(USBTX, USBRX);
+PwmOut Sonido(PTD1);
+PulseInOut irda(PTD5);// en este puerto se pone el sensor infrarrojo
+
+
+float periodo;
+float Frecuencia = 4000;
+int C1 = 0x0C;
+int m = 0, flag = 0;
+uint8_t pot[7] = {1, 2, 4, 8, 16, 32, 64};
+uint8_t pot1[7] = {254, 253, 251, 248, 239, 223, 191};
+int Lugar = 0; // Definen el punto en el cual va el programa
+int i = 0, j = 0;
+int pos = 0; // Reloj:0, Alarma1:1, Alarma2:2, ... , Alarma7:7
+uint8_t state_alarms = 0, pos_alarm = 0, alarma = 0;
+
+//irda
+int header = 0; //tiempo de cabecera pulso abajo
+const int head_H = 4550; //+20% medida con osciloscopio en microsegundos
+const int head_L = 4410;//-20% medida con osciloscopio
+int g = 0, h = 0, count = 0, mostrar = 0;
+const int T_alto = 1600;//ponga su tiempo de la prueba
+const int T_bajo = 485;//ponga su tiempo de la prueba
+const int num_bits = 32;//ponga su numero de bits
+int num[num_bits];//cadena para almacenar todos los tiempos que conforman los bits de datos
+int sec[num_bits];//cadena para almacenar la cadena codificada en binario
+int dato; // tiempo de cada dato que se lee
+int boton_sel = 10;
+int boton[10][32]= {{1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,1,1,1,0,1,0,0,0,0,0,0,1,0,1,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,0,0,0,0,0,1,0,0,1,1,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,0,1,0,0,0,0,1,0,1,0,1,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,1,0,0,0,0,1,0,0,0,1,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,0,0,1,0,0,0,1,0,1,1,0,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,0,1,0,0,0,1,0,0,1,0,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,0,1,1,0,0,0,1,0,1,0,0,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,1,1,0,0,0,1,0,0,0,0,1,1,1,0,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,1,1,1,1,1,0,0,0,0,0,0,0,0,1,0},
+ {1,1,0,0,0,0,1,0,1,1,0,0,1,0,1,0,1,1,1,0,1,1,0,0,0,0,0,1,0,0,1,0}};
+
+
+int main()
+{
+ Rtc_Ds1307::Time_rtc tm = {};
+ Rtc_Ds1307::Time_rtc Alarm[7] = {};
+ lcd.cls();
+ lcd.writeCommand(C1);//escribimos un comando segun el manual del modulo LCD
+ lcd.locate(0,0);
+ periodo=(1/Frecuencia);
+ Sonido.period(periodo);
+ rtc.getTime(tm); //lee el tiempo del DS1307
+ Sonido.write(255);
+
+
+ while(1)
+ {
+ switch (Lugar)
+ {
+ case 0:
+
+ rtc.getTime(tm);
+ m = wheel.getPulses();
+ if(m != 0)
+ {
+ wheel.reset();
+ pos = pos + m;
+ m = 0;
+ lcd.cls();
+ }
+ if(pos > 7)
+ {
+ pos = -1;
+ }
+ if(pos < -1)
+ {
+ pos = 7;
+ }
+ if(pos == 0)
+ {
+ lcd.locate(0,0);
+ lcd.printf("Time: ");
+ lcd.locate(8,0);
+ lcd.printf("%02d:",tm.hour);
+ lcd.printf("%02d:",tm.min);
+ lcd.printf("%02d",tm.sec);
+ lcd.locate(0,1);
+ lcd.printf("%02d/",tm.mon);
+ lcd.printf("%02d/",tm.date);
+ lcd.printf("%02d",tm.year);
+ if (mostrar != 0){
+ lcd.printf("% d",mostrar);
+ }
+
+ wait(0.1);
+ }
+
+ if(pos == -1)
+ {
+ lcd.locate(0,0);
+ lcd.printf("Alarm Setup IRDA");
+ wait(0.1);
+ }
+
+
+ if(pos > 0)
+ {
+ lcd.locate(0,0);
+ lcd.printf("Alarm %d", pos);
+ lcd.locate(8,0);
+ lcd.printf("%02d:",Alarm[pos - 1].hour);
+ lcd.printf("%02d:",Alarm[pos - 1].min);
+ lcd.printf("%02d",Alarm[pos - 1].sec);
+ lcd.locate(0,1);
+ lcd.printf("%02d/",Alarm[pos - 1].mon);
+ lcd.printf("%02d/",Alarm[pos - 1].date);
+ lcd.printf("%02d",Alarm[pos - 1].year);
+ lcd.locate(13,1);
+ if((state_alarms&(pot[pos - 1])) == pot[pos - 1])
+ {
+ lcd.printf("On ");
+ }
+ else
+ {
+ lcd.printf("Off");
+ }
+
+ wait(0.1);
+ }
+ for(j=0;j<7;j++)
+ {
+ if( (tm.date==Alarm[j].date)&&(tm.mon==Alarm[j].mon)&&(tm.year==Alarm[j].year)&&(tm.hour==Alarm[j].hour)&&(tm.min==Alarm[j].min)&&(tm.sec==Alarm[j].sec)&&((state_alarms&(pot[j])) == pot[j]))
+ {
+ Lugar = 2;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Active Alarm%d!!!",(j+1));
+ lcd.locate(0,1);
+ lcd.printf("->Disable ");
+ lcd.locate(10,1);
+ lcd.printf("--5min");
+ pos_alarm = j;
+ }
+ }
+
+ if (button_enco.falling()) //si se pulsa boton encoder
+ {
+ if(pos == -1)
+ {Lugar = 3;
+ lcd.cls();}
+ else
+ {Lugar = 1;}
+
+ }
+
+ break;
+
+ case 1:
+ switch(i)
+ {
+ case 0:
+ if(pos == 0)
+ {
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Time Setup");
+ }
+
+ if(pos > 0)
+ {
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Alarm %d Setup", pos);
+ }
+ wait(1);
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Day: ");
+ break;
+
+ case 1:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ tm.date = tm.date + m;
+ if(tm.date > 31)
+ {
+ tm.date = 1;
+ }
+ if(tm.date < 1)
+ {
+ tm.date = 31;
+ }
+ wheel.reset();
+ m = 0;
+ }
+ lcd.locate(5,0);
+ lcd.printf("%02d",tm.date);
+
+ if (button_enco.falling())
+ {
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Month: ");
+ }
+ break;
+
+ case 2:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ tm.mon = tm.mon + m;
+ if(tm.mon > 12)
+ {
+ tm.mon = 1;
+ }
+ if(tm.mon < 1)
+ {
+ tm.mon = 12;
+ }
+ wheel.reset();
+ m = 0;
+ }
+ lcd.locate(7,0);
+ lcd.printf("%02d",tm.mon);
+
+ if (button_enco.falling())
+ {
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Year: ");
+ }
+ break;
+
+ case 3:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ tm.year = tm.year + m;
+ if(tm.year < 2000)
+ {
+ tm.year = 2000;
+ }
+ wheel.reset();
+ m = 0;
+ }
+ lcd.locate(6,0);
+ lcd.printf("%02d",tm.year);
+
+ if (button_enco.falling())
+ {
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Hours: ");
+ }
+ break;
+
+ case 4:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ tm.hour = tm.hour + m;
+ if(tm.hour > 23)
+ {
+ tm.hour = 0;
+ }
+ if(tm.hour < 0)
+ {
+ tm.hour = 23;
+ }
+ wheel.reset();
+ m = 0;
+ }
+ lcd.locate(7,0);
+ lcd.printf("%02d",tm.hour);
+
+ if (button_enco.falling())
+ {
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Minutes: ");
+ }
+
+ break;
+
+ case 5:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ tm.min = tm.min + m;
+ if(tm.min > 59)
+ {
+ tm.min = 0;
+ }
+ if(tm.min < 0)
+ {
+ tm.min = 59;
+ }
+
+ wheel.reset();
+ m = 0;
+ }
+ lcd.locate(9,0);
+ lcd.printf("%02d",tm.min);
+
+ if (button_enco.falling())
+ {
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Seconds: ");
+ }
+ break;
+
+
+ case 6:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ tm.sec = tm.sec + m;
+ if(tm.sec > 59)
+ {
+ tm.sec = 0;
+ }
+ if(tm.sec < 0)
+ {
+ tm.sec = 59;
+ }
+ wheel.reset();
+ m = 0;
+ }
+ lcd.locate(9,0);
+ lcd.printf("%02d",tm.sec);
+
+ if (button_enco.falling())
+ {
+ if(pos==0)
+ {
+ rtc.setTime(tm, false, false);
+ rtc.startClock();
+ lcd.cls();
+ lcd.locate(0, 0);
+ lcd.printf("Time Set");
+ wait(1);
+ i = 0;
+ Lugar = 0;
+ lcd.cls();
+ }
+ if(pos > 0)
+ {
+ i++;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Enable: Off");
+ }
+ }
+ break;
+
+ case 7:
+ m = wheel.getPulses();
+ if (m != 0)
+ {
+ if(flag == 0)
+ {
+ lcd.locate(8,0);
+ lcd.printf("On ");
+ flag = 1; //se activa la alarma
+ }
+ else
+ if(flag == 1)
+ {
+ lcd.locate(8,0);
+ lcd.printf("Off");
+ flag = 0; //se desactiva la alarma
+ }
+ wheel.reset();
+ m = 0;
+ }
+
+ if (button_enco.falling())
+ {
+ if(flag == 1)
+ {
+ state_alarms = state_alarms | pot[(pos - 1)];
+ }
+ if(flag == 0)
+ {
+ state_alarms = state_alarms & pot1[(pos - 1)];
+ }
+ Alarm[pos - 1] = tm;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Alarm %d Set", pos);
+ wait(1);
+ i = 0;
+ Lugar = 0;
+ flag = 0;
+ lcd.cls();
+ }
+ break;
+ }
+ break;
+
+ case 2:
+ Sonido.write(0.5);
+ wait(0.2);
+ Sonido.write(255);
+ wait(0.2);
+ Sonido.write(0.5);
+ wait(0.2);
+ Sonido.write(255);
+ wait(0.2);
+
+ m = wheel.getPulses();
+
+ if(alarma == 0) //pos_alarm
+ {
+ if(m != 0)
+ {
+ alarma = 1;
+ wheel.reset();
+ m = 0;
+ lcd.locate(1,1);
+ lcd.printf("-");
+ lcd.locate(11,1);
+ lcd.printf(">");
+ }
+ }
+
+ if(alarma == 1)
+ {
+ if(m != 0)
+ {
+ alarma = 0;
+ wheel.reset();
+ m = 0;
+ lcd.locate(1,1);
+ lcd.printf(">");
+ lcd.locate(11,1);
+ lcd.printf("-");
+ }
+ }
+
+ if (button_enco.falling())
+ {
+ if(alarma == 0)
+ {
+ wheel.reset();
+ m=0;
+ Sonido.write(255);
+ lcd.cls();
+ wait(0.5);
+
+ }
+ if(alarma==1)
+ {
+ rtc.getTime(tm);
+ if(tm.min >= 55)
+ {
+ Alarm[pos_alarm].min = (tm.min + 5) - 60;
+ Alarm[pos_alarm].hour = tm.hour + 1;
+ }
+ else
+ {
+ Alarm[pos_alarm].min = tm.min + 5;
+ }
+ lcd.cls();
+ alarma=0;
+
+ }
+ Lugar = 0;
+ }
+ break;
+
+ case 3:
+ lcd.locate(0,0);
+ lcd.printf("Waiting IRDA");
+ header = 0;
+ header = irda.read_low_us(); //funcion para leer un pulso de caida o bajo
+ if (header > head_L && header < head_H)//verificar que este en la tolerancia +-20%
+ {
+ //leo los datos de la trama y se meten a un arreglo
+ wait_us(2000);
+ for(g = 0; g<(num_bits-1); g++) // POR OSCILOSCOPIO se determina que llegan (num_bits),datos
+ {
+ dato = irda.read_high_us(); //leer un bit de datos que es pulso arriba en este control
+ num[g]=dato;
+ wait_us(332);
+ }
+ for(g = 0; g<num_bits; g++) // guardo la secuancia en binario
+ {
+ if(num[g] > ((T_alto+T_bajo)/2)){sec[g]=1;}
+ else {sec[g]=0;}
+ pc.printf("%d", sec[g]);
+ }
+ pc.printf("\n");
+ for(h = 0; h < 8; h++)
+ {
+ for(g = 0; g < 32; g++)
+ {
+ if(sec[g]==boton[h][g]) //en caso de que un bit no coincida se descarta el boton 1
+ {
+ count++;
+ if(count==32)
+ {
+ boton_sel = h - 1;
+ lcd.cls();
+ lcd.locate(0,0);
+ lcd.printf("Alarm %d: ",(boton_sel+1));
+ if(boton_sel >= 0)
+ {
+ if((state_alarms&(pot[boton_sel])) == pot[boton_sel])
+ {
+ state_alarms = state_alarms & pot1[boton_sel];
+ lcd.locate(10,0);
+ lcd.printf("Off");
+ wait(1.5);
+ lcd.cls();
+ }
+ else
+ {
+ state_alarms = state_alarms | pot[boton_sel];
+ lcd.locate(10,0);
+ lcd.printf("On ");
+ wait(1.5);
+ lcd.cls();
+ mostrar = boton_sel+1;
+ }
+ }
+ else
+ {
+ Lugar = 0;
+ pos = 0;
+ lcd.cls();
+ }
+ }
+ }
+ }
+ count = 0;
+ }
+ }
+
+
+ break;
+ }
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r 60db34a2735c Pulse1.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Pulse1.lib Sat Jun 02 15:54:16 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/tony63/code/Pulse1/#48651f86a80c
diff -r 000000000000 -r 60db34a2735c QEI.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/QEI.lib Sat Jun 02 15:54:16 2018 +0000 @@ -0,0 +1,1 @@ +https://mbed.org/users/aberk/code/QEI/#5c2ad81551aa
diff -r 000000000000 -r 60db34a2735c RTC-DS1307.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/RTC-DS1307.lib Sat Jun 02 15:54:16 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/leihen/code/RTC-DS1307/#5627b407e097
diff -r 000000000000 -r 60db34a2735c TextLCD.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TextLCD.lib Sat Jun 02 15:54:16 2018 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/amarincan/code/TextLCD/#d692719a4c59
diff -r 000000000000 -r 60db34a2735c debug.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/debug.h Sat Jun 02 15:54:16 2018 +0000
@@ -0,0 +1,16 @@
+#ifndef __DEBUG_H__
+#define __DEBUG_H__
+
+
+#ifdef DEBUG
+#define INFO(x, ...) std::printf("[INFO: %s:%d]"x"\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#define WARN(x, ...) std::printf("[WARN: %s:%d]"x"\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#define ERR(x, ...) std::printf("[ERR: %s:%d]"x"\r\n", __FILE__, __LINE__, ##__VA_ARGS__);
+#else
+#define INFO(x, ...)
+#define WARN(x, ...)
+#define ERR(x, ...)
+#endif
+
+
+#endif
\ No newline at end of file
diff -r 000000000000 -r 60db34a2735c mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sat Jun 02 15:54:16 2018 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/5aab5a7997ee \ No newline at end of file