Output channel configuration
[TIM Exported Functions]

Configure an output channel.

Note:

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1M LL_TIM_OC_ConfigOutput
CCMR1 CC1S LL_TIM_OC_ConfigOutput
CCMR1 OC2M LL_TIM_OC_ConfigOutput
CCMR1 CC2S LL_TIM_OC_ConfigOutput
CCMR2 OC3M LL_TIM_OC_ConfigOutput
CCMR2 CC3S LL_TIM_OC_ConfigOutput
CCMR2 OC4M LL_TIM_OC_ConfigOutput
CCMR2 CC4S LL_TIM_OC_ConfigOutput
CCMR3 OC5M LL_TIM_OC_ConfigOutput
CCMR3 CC5S LL_TIM_OC_ConfigOutput
CCMR3 OC6M LL_TIM_OC_ConfigOutput
CCMR3 CC6S LL_TIM_OC_ConfigOutput
CCER OC1P LL_TIM_OC_ConfigOutput
CCER OC2P LL_TIM_OC_ConfigOutput
CCER OC3P LL_TIM_OC_ConfigOutput
CCER OC4P LL_TIM_OC_ConfigOutput
CCER OC5P LL_TIM_OC_ConfigOutput
CCER OC6P LL_TIM_OC_ConfigOutput
CR2 OIS1 LL_TIM_OC_ConfigOutput
CR2 OIS2 LL_TIM_OC_ConfigOutput
CR2 OIS3 LL_TIM_OC_ConfigOutput
CR2 OIS4 LL_TIM_OC_ConfigOutput
CR2 OIS5 LL_TIM_OC_ConfigOutput
CR2 OIS6 LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
Configuration	This parameter must be a combination of all the following values: LL_TIM_OCMODE_FROZEN or ... or LL_TIM_OCMODE_ASSYMETRIC_PWM2 LL_TIM_OCPOLARITY_HIGH or LL_TIM_OCPOLARITY_LOW LL_TIM_OCIDLESTATE_LOW or LL_TIM_OCIDLESTATE_HIGH

Return values:

None

Definition at line 1625 of file stm32l4xx_ll_tim.h.

Configure a complementary output channel.

Note:

Macro IS_TIM_CCXN_INSTANCE(TIMx, Channel) can be used to check whether or not a complementary channel is supported by the a timer instance. CCER CC1NP LL_TIM_OC_ConfigOutputN
CCER CC2NP LL_TIM_OC_ConfigOutputN
CCER CC3NP LL_TIM_OC_ConfigOutputN
CR2 OIS1N LL_TIM_OC_ConfigOutputN
CR2 OIS2N LL_TIM_OC_ConfigOutputN
CR2 OIS3N LL_TIM_OC_ConfigOutputN

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3N
Polarity	This parameter can be one of the following values: LL_TIM_OCPOLARITY_HIGH LL_TIM_OCPOLARITY_LOW
IdleState	This parameter can be one of the following values: LL_TIM_OCIDLESTATE_LOW LL_TIM_OCIDLESTATE_HIGH

Return values:

None

Definition at line 1657 of file stm32l4xx_ll_tim.h.

Disable clearing the output channel on an external event.

Note:

Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether or not a timer instance can clear the OCxREF signal on an external event.

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1CE LL_TIM_OC_ConfigOutput
CCMR1 OC2CE LL_TIM_OC_ConfigOutput
CCMR2 OC3CE LL_TIM_OC_ConfigOutput
CCMR2 OC4CE LL_TIM_OC_ConfigOutput
CCMR3 OC5CE LL_TIM_OC_ConfigOutput
CCMR3 OC6CE LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2053 of file stm32l4xx_ll_tim.h.

Disable fast mode for the output channel.

Note:

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1FE LL_TIM_OC_ConfigOutput
CCMR1 OC2FE LL_TIM_OC_ConfigOutput
CCMR2 OC3FE LL_TIM_OC_ConfigOutput
CCMR2 OC4FE LL_TIM_OC_ConfigOutput
CCMR3 OC5FE LL_TIM_OC_ConfigOutput
CCMR3 OC6FE LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 1938 of file stm32l4xx_ll_tim.h.

Disable compare register (TIMx_CCRx) preload for the output channel.

Note:

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1PE LL_TIM_OC_ConfigOutput
CCMR1 OC2PE LL_TIM_OC_ConfigOutput
CCMR2 OC3PE LL_TIM_OC_ConfigOutput
CCMR2 OC4PE LL_TIM_OC_ConfigOutput
CCMR3 OC5PE LL_TIM_OC_ConfigOutput
CCMR3 OC6PE LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 1993 of file stm32l4xx_ll_tim.h.

Enable clearing the output channel on an external event.

Note:

This function can only be used in Output compare and PWM modes. It does not work in Forced mode.

Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether or not a timer instance can clear the OCxREF signal on an external event.

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1CE LL_TIM_OC_ConfigOutput
CCMR1 OC2CE LL_TIM_OC_ConfigOutput
CCMR2 OC3CE LL_TIM_OC_ConfigOutput
CCMR2 OC4CE LL_TIM_OC_ConfigOutput
CCMR3 OC5CE LL_TIM_OC_ConfigOutput
CCMR3 OC6CE LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 2024 of file stm32l4xx_ll_tim.h.

Enable fast mode for the output channel.

Note:

Acts only if the channel is configured in PWM1 or PWM2 mode.

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1FE LL_TIM_OC_ConfigOutput
CCMR1 OC2FE LL_TIM_OC_ConfigOutput
CCMR2 OC3FE LL_TIM_OC_ConfigOutput
CCMR2 OC4FE LL_TIM_OC_ConfigOutput
CCMR3 OC5FE LL_TIM_OC_ConfigOutput
CCMR3 OC6FE LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 1910 of file stm32l4xx_ll_tim.h.

Enable compare register (TIMx_CCRx) preload for the output channel.

Note:

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1PE LL_TIM_OC_ConfigOutput
CCMR1 OC2PE LL_TIM_OC_ConfigOutput
CCMR2 OC3PE LL_TIM_OC_ConfigOutput
CCMR2 OC4PE LL_TIM_OC_ConfigOutput
CCMR3 OC5PE LL_TIM_OC_ConfigOutput
CCMR3 OC6PE LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

None

Definition at line 1966 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR1) set for output channel 1.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not output channel 1 is supported by a timer instance. CCR1 CCR1 LL_TIM_OC_GetCompareCH1

Parameters:

TIMx	Timer instance

Return values:

CompareValue

Definition at line 2181 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR2) set for output channel 2.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not output channel 2 is supported by a timer instance. CCR2 CCR2 LL_TIM_OC_GetCompareCH2

Parameters:

TIMx	Timer instance

Return values:

CompareValue

Definition at line 2197 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR3) set for output channel 3.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not output channel 3 is supported by a timer instance. CCR3 CCR3 LL_TIM_OC_GetCompareCH3

Parameters:

TIMx	Timer instance

Return values:

CompareValue

Definition at line 2213 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR4) set for output channel 4.

Note:

In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not output channel 4 is supported by a timer instance. CCR4 CCR4 LL_TIM_OC_GetCompareCH4

Parameters:

TIMx	Timer instance

Return values:

CompareValue

Definition at line 2229 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR5) set for output channel 5.

Note:

Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not output channel 5 is supported by a timer instance. CCR5 CCR5 LL_TIM_OC_GetCompareCH5

Parameters:

TIMx	Timer instance

Return values:

CompareValue

Definition at line 2242 of file stm32l4xx_ll_tim.h.

Get compare value (TIMx_CCR6) set for output channel 6.

Note:

Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not output channel 6 is supported by a timer instance. CCR6 CCR6 LL_TIM_OC_GetCompareCH6

Parameters:

TIMx	Timer instance

Return values:

CompareValue

Definition at line 2255 of file stm32l4xx_ll_tim.h.

Get the IDLE state of an output channel.

Note:

Macros IS_TIM_CCX_INSTANCE(TIMx, Channel) or IS_TIM_CCXN_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CR2 OIS1 LL_TIM_CC_EnableChannel
CR2 OIS2N LL_TIM_CC_EnableChannel
CR2 OIS2 LL_TIM_CC_EnableChannel
CR2 OIS2N LL_TIM_CC_EnableChannel
CR2 OIS3 LL_TIM_CC_EnableChannel
CR2 OIS3N LL_TIM_CC_EnableChannel
CR2 OIS4 LL_TIM_CC_EnableChannel
CR2 OIS5 LL_TIM_CC_EnableChannel
CR2 OIS6 LL_TIM_CC_EnableChannel

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

Returned

value can be one of the following values: LL_TIM_OCIDLESTATE_LOW LL_TIM_OCIDLESTATE_HIGH

Definition at line 1883 of file stm32l4xx_ll_tim.h.

Get the output compare mode of an output channel.

Note:

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1M LL_TIM_OC_ConfigOutput
CCMR1 OC2M LL_TIM_OC_ConfigOutput
CCMR2 OC3M LL_TIM_OC_ConfigOutput
CCMR2 OC4M LL_TIM_OC_ConfigOutput
CCMR3 OC5M LL_TIM_OC_ConfigOutput
CCMR3 OC6M LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

Returned

value can be one of the following values: LL_TIM_OCMODE_FROZEN LL_TIM_OCMODE_ACTIVE LL_TIM_OCMODE_INACTIVE LL_TIM_OCMODE_TOGGLE LL_TIM_OCMODE_FORCED_INACTIVE LL_TIM_OCMODE_FORCED_ACTIVE LL_TIM_OCMODE_PWM1 LL_TIM_OCMODE_PWM2 LL_TIM_OCMODE_RETRIG_OPM1 LL_TIM_OCMODE_RETRIG_OPM2 LL_TIM_OCMODE_COMBINED_PWM1 LL_TIM_OCMODE_COMBINED_PWM2 LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASSYMETRIC_PWM2

Definition at line 1740 of file stm32l4xx_ll_tim.h.

Get the polarity of an output channel.

Note:

Macros IS_TIM_CCX_INSTANCE(TIMx, Channel) or IS_TIM_CCXN_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCER CC1P LL_TIM_CC_EnableChannel
CCER CC1NP LL_TIM_CC_EnableChannel
CCER CC2P LL_TIM_CC_EnableChannel
CCER CC2NP LL_TIM_CC_EnableChannel
CCER CC3P LL_TIM_CC_EnableChannel
CCER CC3NP LL_TIM_CC_EnableChannel
CCER CC4P LL_TIM_CC_EnableChannel
CCER CC5P LL_TIM_CC_EnableChannel
CCER CC6P LL_TIM_CC_EnableChannel

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6

Return values:

Returned

value can be one of the following values: LL_TIM_OCPOLARITY_HIGH LL_TIM_OCPOLARITY_LOW

Definition at line 1812 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 1 (TIMx_CCR1)

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not output channel 1 is supported by a timer instance. CCR1 CCR1 LL_TIM_OC_SetCompareCH1

Parameters:

TIMx	Timer instance
CompareValue	Between 0 and 65535

Return values:

None

Definition at line 2086 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 2 (TIMx_CCR2)

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not output channel 2 is supported by a timer instance. CCR2 CCR2 LL_TIM_OC_SetCompareCH2

Parameters:

TIMx	Timer instance
CompareValue	Between 0 and 65535

Return values:

None

Definition at line 2103 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 3 (TIMx_CCR3)

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not output channel is supported by a timer instance. CCR3 CCR3 LL_TIM_OC_SetCompareCH3

Parameters:

TIMx	Timer instance
CompareValue	Between 0 and 65535

Return values:

None

Definition at line 2120 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 4 (TIMx_CCR4)

Note:

In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF.

Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check whether or not a timer instance supports a 32 bits counter.

Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not output channel 4 is supported by a timer instance. CCR4 CCR4 LL_TIM_OC_SetCompareCH4

Parameters:

TIMx	Timer instance
CompareValue	Between 0 and 65535

Return values:

None

Definition at line 2137 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 5 (TIMx_CCR5)

Note:

Macro IS_TIM_CC5_INSTANCE(TIMx) can be used to check whether or not output channel 5 is supported by a timer instance. CCR5 CCR5 LL_TIM_OC_SetCompareCH5

Parameters:

TIMx	Timer instance
CompareValue	Between 0 and 65535

Return values:

None

Definition at line 2151 of file stm32l4xx_ll_tim.h.

Set compare value for output channel 6 (TIMx_CCR6)

Note:

Macro IS_TIM_CC6_INSTANCE(TIMx) can be used to check whether or not output channel 6 is supported by a timer instance. CCR6 CCR6 LL_TIM_OC_SetCompareCH6

Parameters:

TIMx	Timer instance
CompareValue	Between 0 and 65535

Return values:

None

Definition at line 2165 of file stm32l4xx_ll_tim.h.

Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge if the Ocx and OCxN signals).

Note:

Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not dead-time insertion feature is supported by a timer instance. BDTR DTG LL_TIM_OC_SetDeadTime

Parameters:

TIMx	Timer instance
DeadTime	Between 0 and 255

Return values:

None

Definition at line 2069 of file stm32l4xx_ll_tim.h.

Set the IDLE state of an output channel.

Note:

Macros IS_TIM_CCX_INSTANCE(TIMx, Channel) or IS_TIM_CCXN_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CR2 OIS1 LL_TIM_CC_EnableChannel
CR2 OIS2N LL_TIM_CC_EnableChannel
CR2 OIS2 LL_TIM_CC_EnableChannel
CR2 OIS2N LL_TIM_CC_EnableChannel
CR2 OIS3 LL_TIM_CC_EnableChannel
CR2 OIS3N LL_TIM_CC_EnableChannel
CR2 OIS4 LL_TIM_CC_EnableChannel
CR2 OIS5 LL_TIM_CC_EnableChannel
CR2 OIS6 LL_TIM_CC_EnableChannel

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
IdleState	This parameter can be one of the following values: LL_TIM_OCIDLESTATE_LOW LL_TIM_OCIDLESTATE_HIGH

Return values:

None

Definition at line 1848 of file stm32l4xx_ll_tim.h.

Set the output compare mode of an output channel.

Note:

Macro IS_TIM_CCX_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCMR1 OC1M LL_TIM_OC_ConfigOutput
CCMR1 OC2M LL_TIM_OC_ConfigOutput
CCMR2 OC3M LL_TIM_OC_ConfigOutput
CCMR2 OC4M LL_TIM_OC_ConfigOutput
CCMR3 OC5M LL_TIM_OC_ConfigOutput
CCMR3 OC6M LL_TIM_OC_ConfigOutput

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
Mode	This parameter can be one of the following values: LL_TIM_OCMODE_FROZEN LL_TIM_OCMODE_ACTIVE LL_TIM_OCMODE_INACTIVE LL_TIM_OCMODE_TOGGLE LL_TIM_OCMODE_FORCED_INACTIVE LL_TIM_OCMODE_FORCED_ACTIVE LL_TIM_OCMODE_PWM1 LL_TIM_OCMODE_PWM2 LL_TIM_OCMODE_RETRIG_OPM1 LL_TIM_OCMODE_RETRIG_OPM2 LL_TIM_OCMODE_COMBINED_PWM1 LL_TIM_OCMODE_COMBINED_PWM2 LL_TIM_OCMODE_ASSYMETRIC_PWM1 LL_TIM_OCMODE_ASSYMETRIC_PWM2

Return values:

None

Definition at line 1699 of file stm32l4xx_ll_tim.h.

Set the polarity of an output channel.

Note:

Macros IS_TIM_CCX_INSTANCE(TIMx, Channel) or IS_TIM_CCXN_INSTANCE(TIMx, Channel) can be used to check whether or not a channel is supported by the a timer instance. CCER CC1P LL_TIM_CC_EnableChannel
CCER CC1NP LL_TIM_CC_EnableChannel
CCER CC2P LL_TIM_CC_EnableChannel
CCER CC2NP LL_TIM_CC_EnableChannel
CCER CC3P LL_TIM_CC_EnableChannel
CCER CC3NP LL_TIM_CC_EnableChannel
CCER CC4P LL_TIM_CC_EnableChannel
CCER CC5P LL_TIM_CC_EnableChannel
CCER CC6P LL_TIM_CC_EnableChannel

Parameters:

TIMx	Timer instance
Channel	This parameter can be one of the following values: LL_TIM_CHANNEL_CH1 LL_TIM_CHANNEL_CH1N LL_TIM_CHANNEL_CH2 LL_TIM_CHANNEL_CH2N LL_TIM_CHANNEL_CH3 LL_TIM_CHANNEL_CH3N LL_TIM_CHANNEL_CH4 LL_TIM_CHANNEL_CH5 LL_TIM_CHANNEL_CH6
Polarity	This parameter can be one of the following values: LL_TIM_OCPOLARITY_HIGH LL_TIM_OCPOLARITY_LOW

Return values:

None

Definition at line 1777 of file stm32l4xx_ll_tim.h.

Select on which reference signal the OC5REF is combined to.

Note:

Macro IS_TIM_COMBINED3PHASEPWM_INSTANCE(TIMx) can be used to check whether or not a timer instance supports the combined 3-phase PWM mode. CCR5 GC5C3 LL_TIM_SetCH5CombinedChannels
CCR5 GC5C2 LL_TIM_SetCH5CombinedChannels
CCR5 GC5C1 LL_TIM_SetCH5CombinedChannels

Parameters:

TIMx	Timer instance
GroupCH5	This parameter can be one of the following values: LL_TIM_GROUPCH5_NONE LL_TIM_GROUPCH5_OC1REFC LL_TIM_GROUPCH5_OC2REFC LL_TIM_GROUPCH5_OC3REFC

Return values:

None

Definition at line 2275 of file stm32l4xx_ll_tim.h.