Extended Peripheral Control functions
[RCCEx Exported Functions]

Get the RCC_ClkInitStruct according to the internal RCC configuration registers.

Parameters:

PeriphClkInit

pointer to an RCC_PeriphCLKInitTypeDef structure that returns the configuration information for the Extended Peripherals clocks(SAI1, SAI2, LPTIM1, LPTIM2, I2C1, I2C2, I2C3, LPUART, USART1, USART2, USART3, UART4, UART5, RTC, ADCx, DFSDMx, SWPMI1, USB, SDMMC1 and RNG).

Return values:

None

Definition at line 574 of file stm32l4xx_hal_rcc_ex.c.

Return the peripheral clock frequency for peripherals with clock source from PLLSAIs.

Note:

Return 0 if peripheral clock identifier not managed by this API

Parameters:

PeriphClk

Peripheral clock identifier This parameter can be one of the following values: RCC_PERIPHCLK_RTC RTC peripheral clock RCC_PERIPHCLK_ADC ADC peripheral clock RCC_PERIPHCLK_DFSDM DFSDM peripheral clock RCC_PERIPHCLK_I2C1 I2C1 peripheral clock RCC_PERIPHCLK_I2C2 I2C2 peripheral clock RCC_PERIPHCLK_I2C3 I2C3 peripheral clock RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock RCC_PERIPHCLK_RNG RNG peripheral clock RCC_PERIPHCLK_SAI1 SAI1 peripheral clock RCC_PERIPHCLK_SAI2 SAI2 peripheral clock RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock RCC_PERIPHCLK_USART1 USART1 peripheral clock RCC_PERIPHCLK_USART2 USART1 peripheral clock RCC_PERIPHCLK_USART3 USART1 peripheral clock RCC_PERIPHCLK_UART4 USART1 peripheral clock RCC_PERIPHCLK_UART5 USART1 peripheral clock RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB)

Return values:

Frequency

in Hz

Definition at line 677 of file stm32l4xx_hal_rcc_ex.c.

Initialize the RCC extended peripherals clocks according to the specified parameters in the RCC_PeriphCLKInitTypeDef.

Parameters:

PeriphClkInit

pointer to an RCC_PeriphCLKInitTypeDef structure that contains a field PeriphClockSelection which can be a combination of the following values: RCC_PERIPHCLK_RTC RTC peripheral clock RCC_PERIPHCLK_ADC ADC peripheral clock RCC_PERIPHCLK_DFSDM DFSDM peripheral clock RCC_PERIPHCLK_I2C1 I2C1 peripheral clock RCC_PERIPHCLK_I2C2 I2C2 peripheral clock RCC_PERIPHCLK_I2C3 I2C3 peripheral clock RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock RCC_PERIPHCLK_RNG RNG peripheral clock RCC_PERIPHCLK_SAI1 SAI1 peripheral clock RCC_PERIPHCLK_SAI2 SAI2 peripheral clock RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock RCC_PERIPHCLK_USART1 USART1 peripheral clock RCC_PERIPHCLK_USART2 USART1 peripheral clock RCC_PERIPHCLK_USART3 USART1 peripheral clock RCC_PERIPHCLK_UART4 USART1 peripheral clock RCC_PERIPHCLK_UART5 USART1 peripheral clock RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB)

Note:

Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select the RTC clock source: in this case the access to Backup domain is enabled.

Return values:

HAL

status

Definition at line 143 of file stm32l4xx_hal_rcc_ex.c.