Hal Drivers for L4

Dependents:   BSP OneHopeOnePrayer FINAL_AUDIO_RECORD AudioDemo

Fork of STM32L4xx_HAL_Driver by Senior Design: Sound Monitor

Revision:
0:80ee8f3b695e
diff -r 000000000000 -r 80ee8f3b695e Inc/stm32l4xx_ll_dma.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Inc/stm32l4xx_ll_dma.h	Mon Nov 02 19:37:23 2015 +0000
@@ -0,0 +1,1902 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_ll_dma.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    16-September-2015
+  * @brief   Header file of DMA LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_DMA_H
+#define __STM32L4xx_LL_DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+  * @{
+  */
+
+#if defined (DMA1) || defined (DMA2)
+
+/** @defgroup DMA_LL DMA
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Variables DMA Private Variables
+  * @{
+  */
+/* Array used to get the DMA channel register offset versus channel index LL_DMA_CHANNEL_x */
+static const uint8_t CHANNEL_OFFSET_TAB[] =
+{
+  (uint8_t)(DMA1_Channel1_BASE - DMA1_BASE),
+  (uint8_t)(DMA1_Channel2_BASE - DMA1_BASE),
+  (uint8_t)(DMA1_Channel3_BASE - DMA1_BASE),
+  (uint8_t)(DMA1_Channel4_BASE - DMA1_BASE),
+  (uint8_t)(DMA1_Channel5_BASE - DMA1_BASE),
+  (uint8_t)(DMA1_Channel6_BASE - DMA1_BASE),
+  (uint8_t)(DMA1_Channel7_BASE - DMA1_BASE)
+};
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA_LL_Private_Constants DMA Private Constants
+  * @{
+  */
+/* Define used to get CSELR register offset */
+#define DMA_CSELR_OFFSET                  (uint32_t)(DMA1_CSELR_BASE - DMA1_BASE)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Constants DMA Exported Constants
+  * @{
+  */
+/** @defgroup DMA_LL_EC_CLEAR_FLAG Clear Flags Defines
+  * @brief    Flags defines which can be used with LL_DMA_WriteReg function
+  * @{
+  */
+#define LL_DMA_IFCR_CGIF1                 DMA_IFCR_CGIF1
+#define LL_DMA_IFCR_CTCIF1                DMA_IFCR_CTCIF1
+#define LL_DMA_IFCR_CHTIF1                DMA_IFCR_CHTIF1
+#define LL_DMA_IFCR_CTEIF1                DMA_IFCR_CTEIF1
+#define LL_DMA_IFCR_CGIF2                 DMA_IFCR_CGIF2
+#define LL_DMA_IFCR_CTCIF2                DMA_IFCR_CTCIF2
+#define LL_DMA_IFCR_CHTIF2                DMA_IFCR_CHTIF2
+#define LL_DMA_IFCR_CTEIF2                DMA_IFCR_CTEIF2
+#define LL_DMA_IFCR_CGIF3                 DMA_IFCR_CGIF3
+#define LL_DMA_IFCR_CTCIF3                DMA_IFCR_CTCIF3
+#define LL_DMA_IFCR_CHTIF3                DMA_IFCR_CHTIF3
+#define LL_DMA_IFCR_CTEIF3                DMA_IFCR_CTEIF3
+#define LL_DMA_IFCR_CGIF4                 DMA_IFCR_CGIF4
+#define LL_DMA_IFCR_CTCIF4                DMA_IFCR_CTCIF4
+#define LL_DMA_IFCR_CHTIF4                DMA_IFCR_CHTIF4
+#define LL_DMA_IFCR_CTEIF4                DMA_IFCR_CTEIF4
+#define LL_DMA_IFCR_CGIF5                 DMA_IFCR_CGIF5
+#define LL_DMA_IFCR_CTCIF5                DMA_IFCR_CTCIF5
+#define LL_DMA_IFCR_CHTIF5                DMA_IFCR_CHTIF5
+#define LL_DMA_IFCR_CTEIF5                DMA_IFCR_CTEIF5
+#define LL_DMA_IFCR_CGIF6                 DMA_IFCR_CGIF6
+#define LL_DMA_IFCR_CTCIF6                DMA_IFCR_CTCIF6
+#define LL_DMA_IFCR_CHTIF6                DMA_IFCR_CHTIF6
+#define LL_DMA_IFCR_CTEIF6                DMA_IFCR_CTEIF6
+#define LL_DMA_IFCR_CGIF7                 DMA_IFCR_CGIF7
+#define LL_DMA_IFCR_CTCIF7                DMA_IFCR_CTCIF7
+#define LL_DMA_IFCR_CHTIF7                DMA_IFCR_CHTIF7
+#define LL_DMA_IFCR_CTEIF7                DMA_IFCR_CTEIF7
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_GET_FLAG Get Flags Defines
+  * @brief    Flags defines which can be used with LL_DMA_ReadReg function
+  * @{
+  */
+#define LL_DMA_ISR_GIF1                   DMA_ISR_GIF1
+#define LL_DMA_ISR_GIF2                   DMA_ISR_GIF2
+#define LL_DMA_ISR_GIF3                   DMA_ISR_GIF3
+#define LL_DMA_ISR_GIF4                   DMA_ISR_GIF4
+#define LL_DMA_ISR_GIF5                   DMA_ISR_GIF5
+#define LL_DMA_ISR_GIF6                   DMA_ISR_GIF6
+#define LL_DMA_ISR_GIF7                   DMA_ISR_GIF7
+#define LL_DMA_ISR_TCIF1                  DMA_ISR_TCIF1
+#define LL_DMA_ISR_TCIF2                  DMA_ISR_TCIF2
+#define LL_DMA_ISR_TCIF3                  DMA_ISR_TCIF3
+#define LL_DMA_ISR_TCIF4                  DMA_ISR_TCIF4
+#define LL_DMA_ISR_TCIF5                  DMA_ISR_TCIF5
+#define LL_DMA_ISR_TCIF6                  DMA_ISR_TCIF6
+#define LL_DMA_ISR_TCIF7                  DMA_ISR_TCIF7
+#define LL_DMA_ISR_HTIF1                  DMA_ISR_HTIF1
+#define LL_DMA_ISR_HTIF2                  DMA_ISR_HTIF2
+#define LL_DMA_ISR_HTIF3                  DMA_ISR_HTIF3
+#define LL_DMA_ISR_HTIF4                  DMA_ISR_HTIF4
+#define LL_DMA_ISR_HTIF5                  DMA_ISR_HTIF5
+#define LL_DMA_ISR_HTIF6                  DMA_ISR_HTIF6
+#define LL_DMA_ISR_HTIF7                  DMA_ISR_HTIF7
+#define LL_DMA_ISR_TEIF1                  DMA_ISR_TEIF1
+#define LL_DMA_ISR_TEIF2                  DMA_ISR_TEIF2
+#define LL_DMA_ISR_TEIF3                  DMA_ISR_TEIF3
+#define LL_DMA_ISR_TEIF4                  DMA_ISR_TEIF4
+#define LL_DMA_ISR_TEIF5                  DMA_ISR_TEIF5
+#define LL_DMA_ISR_TEIF6                  DMA_ISR_TEIF6
+#define LL_DMA_ISR_TEIF7                  DMA_ISR_TEIF7
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_IT IT Defines
+  * @brief    IT defines which can be used with LL_DMA_ReadReg and  LL_DMA_WriteReg functions
+  * @{
+  */
+#define LL_DMA_CCR_TCIE                   DMA_CCR_TCIE
+#define LL_DMA_CCR_HTIE                   DMA_CCR_HTIE
+#define LL_DMA_CCR_TEIE                   DMA_CCR_TEIE
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_CHANNEL CHANNEL
+  * @{
+  */
+#define LL_DMA_CHANNEL_1                  ((uint32_t)0x00000001)
+#define LL_DMA_CHANNEL_2                  ((uint32_t)0x00000002)
+#define LL_DMA_CHANNEL_3                  ((uint32_t)0x00000003)
+#define LL_DMA_CHANNEL_4                  ((uint32_t)0x00000004)
+#define LL_DMA_CHANNEL_5                  ((uint32_t)0x00000005)
+#define LL_DMA_CHANNEL_6                  ((uint32_t)0x00000006)
+#define LL_DMA_CHANNEL_7                  ((uint32_t)0x00000007)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_DIRECTION DIRECTION
+  * @{
+  */
+#define LL_DMA_DIRECTION_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_CCR_DIR            /*!< Memory to peripheral direction */
+#define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_CCR_MEM2MEM        /*!< Memory to memory direction     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_MODE MODE
+  * @{
+  */
+#define LL_DMA_MODE_NORMAL                ((uint32_t)0x00000000) /*!< Normal Mode                  */
+#define LL_DMA_MODE_CIRCULAR              DMA_CCR_CIRC           /*!< Circular Mode                */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_PERIPH PERIPH
+  * @{
+  */
+#define LL_DMA_PERIPH_INCREMENT           DMA_CCR_PINC           /*!< Peripheral increment mode Enable */
+#define LL_DMA_PERIPH_NOINCREMENT         ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_MEMORY MEMORY
+  * @{
+  */
+#define LL_DMA_MEMORY_INCREMENT           DMA_CCR_MINC           /*!< Memory increment mode Enable  */
+#define LL_DMA_MEMORY_NOINCREMENT         ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN
+  * @{
+  */
+#define LL_DMA_PDATAALIGN_BYTE            ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte     */
+#define LL_DMA_PDATAALIGN_HALFWORD        DMA_CCR_PSIZE_0        /*!< Peripheral data alignment : HalfWord */
+#define LL_DMA_PDATAALIGN_WORD            DMA_CCR_PSIZE_1        /*!< Peripheral data alignment : Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN
+  * @{
+  */
+#define LL_DMA_MDATAALIGN_BYTE            ((uint32_t)0x00000000) /*!< Memory data alignment : Byte     */
+#define LL_DMA_MDATAALIGN_HALFWORD        DMA_CCR_MSIZE_0        /*!< Memory data alignment : HalfWord */
+#define LL_DMA_MDATAALIGN_WORD            DMA_CCR_MSIZE_1        /*!< Memory data alignment : Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_PRIORITY PRIORITY
+  * @{
+  */
+#define LL_DMA_PRIORITY_LOW               ((uint32_t)0x00000000) /*!< Priority level : Low       */
+#define LL_DMA_PRIORITY_MEDIUM            DMA_CCR_PL_0           /*!< Priority level : Medium    */
+#define LL_DMA_PRIORITY_HIGH              DMA_CCR_PL_1           /*!< Priority level : High      */
+#define LL_DMA_PRIORITY_VERYHIGH          DMA_CCR_PL             /*!< Priority level : Very_High */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EC_REQUEST REQUEST
+  * @{
+  */
+#define LL_DMA_REQUEST_0                  ((uint32_t)0x00000000)
+#define LL_DMA_REQUEST_1                  ((uint32_t)0x00000001)
+#define LL_DMA_REQUEST_2                  ((uint32_t)0x00000002)
+#define LL_DMA_REQUEST_3                  ((uint32_t)0x00000003)
+#define LL_DMA_REQUEST_4                  ((uint32_t)0x00000004)
+#define LL_DMA_REQUEST_5                  ((uint32_t)0x00000005)
+#define LL_DMA_REQUEST_6                  ((uint32_t)0x00000006)
+#define LL_DMA_REQUEST_7                  ((uint32_t)0x00000007)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Macros DMA Exported Macros
+  * @{
+  */
+
+/** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros
+  * @{
+  */
+/**
+  * @brief  Write a value in DMA register
+  * @param  __INSTANCE__ DMA Instance
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in DMA register
+  * @param  __INSTANCE__ DMA Instance
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxChannely
+  * @{
+  */
+/**
+  * @brief  Convert DMAx_Channely into DMAx
+  * @param  __CHANNEL_INSTANCE__ DMAx_Channely
+  * @retval DMAx
+  */
+#define __LL_DMA_GET_INSTANCE(__CHANNEL_INSTANCE__)   \
+(((uint32_t)(__CHANNEL_INSTANCE__) > ((uint32_t)DMA1_Channel7)) ?  DMA2 : DMA1)
+
+/**
+  * @brief  Convert DMAx_Channely into LL_DMA_CHANNEL_y
+  * @param  __CHANNEL_INSTANCE__ DMAx_Channely
+  * @retval LL_DMA_CHANNEL_y
+  */
+#define __LL_DMA_GET_CHANNEL(__CHANNEL_INSTANCE__)   \
+(((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel1)) ? LL_DMA_CHANNEL_1 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel2)) ? LL_DMA_CHANNEL_2 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel3)) ? LL_DMA_CHANNEL_3 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel4)) ? LL_DMA_CHANNEL_4 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel5)) ? LL_DMA_CHANNEL_5 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA1_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ ((uint32_t)(__CHANNEL_INSTANCE__) == ((uint32_t)DMA2_Channel6)) ? LL_DMA_CHANNEL_6 : \
+ LL_DMA_CHANNEL_7)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA_LL_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @defgroup DMA_LL_EF_Configuration Configuration
+  * @{
+  */
+/**
+  * @brief  Enable DMA channel.
+  * @rmtoll CCR          EN            LL_DMA_EnableChannel
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_EnableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_EN);
+}
+
+/**
+  * @brief  Disable DMA channel.
+  * @rmtoll CCR          EN            LL_DMA_DisableChannel
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_DisableChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_EN);
+}
+
+/**
+  * @brief  Check if DMA channel is enabled or disabled.
+  * @rmtoll CCR          EN            LL_DMA_IsEnabledChannel
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledChannel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_EN) == (DMA_CCR_EN));
+}
+
+/**
+  * @brief  Configure all parameters link to DMA transfer.
+  * @rmtoll CCR          DIR           LL_DMA_ConfigTransfer\n
+  *         CCR          MEM2MEM       LL_DMA_ConfigTransfer\n
+  *         CCR          CIRC          LL_DMA_ConfigTransfer\n
+  *         CCR          PINC          LL_DMA_ConfigTransfer\n
+  *         CCR          MINC          LL_DMA_ConfigTransfer\n
+  *         CCR          PSIZE         LL_DMA_ConfigTransfer\n
+  *         CCR          MSIZE         LL_DMA_ConfigTransfer\n
+  *         CCR          PL            LL_DMA_ConfigTransfer
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Configuration This parameter must be a combination of all the following values:
+  *         @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+  *         @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR
+  *         @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT
+  *         @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT
+  *         @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD
+  *         @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD
+  *         @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef* DMAx, uint32_t Channel, uint32_t Configuration)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_DIR | DMA_CCR_MEM2MEM | DMA_CCR_CIRC | DMA_CCR_PINC | DMA_CCR_MINC | DMA_CCR_PSIZE | DMA_CCR_MSIZE | DMA_CCR_PL, Configuration);
+}
+
+/**
+  * @brief  Set Data transfer direction (read from peripheral or from memory).
+  * @rmtoll CCR          DIR           LL_DMA_SetDataTransferDirection\n
+  *         CCR          MEM2MEM       LL_DMA_SetDataTransferDirection
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Direction This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+  *         @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+  *         @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t  Direction)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_DIR | DMA_CCR_MEM2MEM, Direction);
+}
+
+/**
+  * @brief  Get Data transfer direction (read from peripheral or from memory).
+  * @rmtoll CCR          DIR           LL_DMA_GetDataTransferDirection\n
+  *         CCR          MEM2MEM       LL_DMA_GetDataTransferDirection
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+  *         @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+  *         @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_DIR | DMA_CCR_MEM2MEM));
+}
+
+/**
+  * @brief  Set DMA mode circular or normal.
+  * @note The circular buffer mode cannot be used if the memory-to-memory
+  * data transfer is configured on the selected Channel.
+  * @rmtoll CCR          CIRC          LL_DMA_SetMode
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Mode This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_MODE_NORMAL
+  *         @arg @ref LL_DMA_MODE_CIRCULAR
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Mode)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_CIRC, Mode);
+}
+
+/**
+  * @brief  Get DMA mode circular or normal.
+  * @rmtoll CCR          CIRC          LL_DMA_GetMode
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_MODE_NORMAL
+  *         @arg @ref LL_DMA_MODE_CIRCULAR
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_CIRC));
+}
+
+/**
+  * @brief  Set Peripheral increment mode.
+  * @rmtoll CCR          PINC          LL_DMA_SetPeriphIncMode
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  IncrementMode This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_PERIPH_INCREMENT
+  *         @arg @ref LL_DMA_PERIPH_NOINCREMENT
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t IncrementMode)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_PINC, IncrementMode);
+}
+
+/**
+  * @brief  Get Peripheral increment mode.
+  * @rmtoll CCR          PINC          LL_DMA_GetPeriphIncMode
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_PERIPH_INCREMENT
+  *         @arg @ref LL_DMA_PERIPH_NOINCREMENT
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_PINC));
+}
+
+/**
+  * @brief  Set Memory increment mode.
+  * @rmtoll CCR          MINC          LL_DMA_SetMemoryIncMode
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  IncrementMode This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_MEMORY_INCREMENT
+  *         @arg @ref LL_DMA_MEMORY_NOINCREMENT
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t IncrementMode)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_MINC, IncrementMode);
+}
+
+/**
+  * @brief  Get Memory increment mode.
+  * @rmtoll CCR          MINC          LL_DMA_GetMemoryIncMode
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_MEMORY_INCREMENT
+  *         @arg @ref LL_DMA_MEMORY_NOINCREMENT
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_MINC));
+}
+
+/**
+  * @brief  Set Peripheral size.
+  * @rmtoll CCR          PSIZE         LL_DMA_SetPeriphSize
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Size This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_PDATAALIGN_BYTE
+  *         @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+  *         @arg @ref LL_DMA_PDATAALIGN_WORD
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t  Size)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_PSIZE, Size);
+}
+
+/**
+  * @brief  Get Peripheral size.
+  * @rmtoll CCR          PSIZE         LL_DMA_GetPeriphSize
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_PDATAALIGN_BYTE
+  *         @arg @ref LL_DMA_PDATAALIGN_HALFWORD
+  *         @arg @ref LL_DMA_PDATAALIGN_WORD
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_PSIZE));
+}
+
+/**
+  * @brief  Set Memory size.
+  * @rmtoll CCR          MSIZE         LL_DMA_SetMemorySize
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Size This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_MDATAALIGN_BYTE
+  *         @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+  *         @arg @ref LL_DMA_MDATAALIGN_WORD
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t  Size)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_MSIZE, Size);
+}
+
+/**
+  * @brief  Get Memory size.
+  * @rmtoll CCR          MSIZE         LL_DMA_GetMemorySize
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_MDATAALIGN_BYTE
+  *         @arg @ref LL_DMA_MDATAALIGN_HALFWORD
+  *         @arg @ref LL_DMA_MDATAALIGN_WORD
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_MSIZE));
+}
+
+/**
+  * @brief  Set Channel priority level.
+  * @rmtoll CCR          PL            LL_DMA_SetChannelPriorityLevel
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Priority This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_PRIORITY_LOW
+  *         @arg @ref LL_DMA_PRIORITY_MEDIUM
+  *         @arg @ref LL_DMA_PRIORITY_HIGH
+  *         @arg @ref LL_DMA_PRIORITY_VERYHIGH
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t  Priority)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_PL, Priority);
+}
+
+/**
+  * @brief  Get Channel priority level.
+  * @rmtoll CCR          PL            LL_DMA_GetChannelPriorityLevel
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_PRIORITY_LOW
+  *         @arg @ref LL_DMA_PRIORITY_MEDIUM
+  *         @arg @ref LL_DMA_PRIORITY_HIGH
+  *         @arg @ref LL_DMA_PRIORITY_VERYHIGH
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetChannelPriorityLevel(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_PL));
+}
+
+/**
+  * @brief  Set Number of data to transfer.
+  * @note   This action has no effect if
+  *         channel is enabled.
+  * @rmtoll CNDTR        NDT           LL_DMA_SetDataLength
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  NbData Between 0 to 0xFFFFFFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t NbData)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CNDTR, DMA_CNDTR_NDT, NbData);
+}
+
+/**
+  * @brief  Get Number of data to transfer.
+  * @note   Once the channel is enabled, the return value indicate the
+  *         remaining bytes to be transmitted.
+  * @rmtoll CNDTR        NDT           LL_DMA_GetDataLength
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Between 0 to 0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CNDTR, DMA_CNDTR_NDT));
+}
+
+/**
+  * @brief  Configure the Source and Destination addresses.
+  * @note   Each IP using DMA provides an API to get directly the register adress (LL_PPP_DMA_GetRegAddr)
+  * @rmtoll CPAR         PA            LL_DMA_ConfigAddresses\n
+  *         CMAR         MA            LL_DMA_ConfigAddresses
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  SrcAddress Between 0 to 0xFFFFFFFF
+  * @param  DstAddress Between 0 to 0xFFFFFFFF
+  * @param  Direction This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY
+  *         @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH
+  *         @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Channel, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction)
+{
+  /* Direction Memory to Periph */
+  if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH)
+  {
+    MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CMAR, DMA_CMAR_MA, SrcAddress);
+    MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CPAR, DMA_CPAR_PA, DstAddress);
+  }
+  /* Direction Periph to Memory and Memory to Memory */
+  else
+  {
+    MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CPAR, DMA_CPAR_PA, SrcAddress);
+    MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CMAR, DMA_CMAR_MA, DstAddress);
+  }
+}
+
+/**
+  * @brief  Set the Memory address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+  * @rmtoll CMAR         MA            LL_DMA_SetMemoryAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  MemoryAddress Between 0 to 0xFFFFFFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CMAR, DMA_CMAR_MA, MemoryAddress);
+}
+
+/**
+  * @brief  Set the Peripheral address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+  * @rmtoll CPAR         PA            LL_DMA_SetPeriphAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  PeriphAddress Between 0 to 0xFFFFFFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Channel, uint32_t PeriphAddress)
+  {
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CPAR, DMA_CPAR_PA, PeriphAddress);
+  }
+
+/**
+  * @brief  Get Memory address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+  * @rmtoll CMAR         MA            LL_DMA_GetMemoryAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Between 0 to 0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Channel)
+  {
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CMAR, DMA_CMAR_MA));
+  }
+
+/**
+  * @brief  Get Peripheral address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only.
+  * @rmtoll CPAR         PA            LL_DMA_GetPeriphAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Between 0 to 0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CPAR, DMA_CPAR_PA));
+}
+
+/**
+  * @brief  Set the Memory to Memory Source address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+  * @rmtoll CPAR         PA            LL_DMA_SetM2MSrcAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  MemoryAddress Between 0 to 0xFFFFFFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Channel, uint32_t MemoryAddress)
+{
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CPAR, DMA_CPAR_PA, MemoryAddress);
+}
+
+/**
+  * @brief  Set the Memory to Memory Destination address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+  * @rmtoll CMAR         MA            LL_DMA_SetM2MDstAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  MemoryAddress Between 0 to 0xFFFFFFFF
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Channel, uint32_t MemoryAddress)
+  {
+  MODIFY_REG(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CMAR, DMA_CMAR_MA, MemoryAddress);
+  }
+
+/**
+  * @brief  Get the Memory to Memory Source address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+  * @rmtoll CPAR         PA            LL_DMA_GetM2MSrcAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Between 0 to 0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Channel)
+  {
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CPAR, DMA_CPAR_PA));
+  }
+
+/**
+  * @brief  Get the Memory to Memory Destination address.
+  * @note   Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only.
+  * @rmtoll CMAR         MA            LL_DMA_GetM2MDstAddress
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Between 0 to 0xFFFFFFFF
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CMAR, DMA_CMAR_MA));
+}
+
+/**
+  * @brief  Set DMA request for DMA instance on Channel x.
+  * @note   Please refer to Reference Manual to get the available mapping of Request value link to Channel Selection.
+  * @rmtoll CSELR        C1S           LL_DMA_SetPeriphRequest\n
+  *         CSELR        C2S           LL_DMA_SetPeriphRequest\n
+  *         CSELR        C3S           LL_DMA_SetPeriphRequest\n
+  *         CSELR        C4S           LL_DMA_SetPeriphRequest\n
+  *         CSELR        C5S           LL_DMA_SetPeriphRequest\n
+  *         CSELR        C6S           LL_DMA_SetPeriphRequest\n
+  *         CSELR        C7S           LL_DMA_SetPeriphRequest
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @param  Request This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_REQUEST_0
+  *         @arg @ref LL_DMA_REQUEST_1
+  *         @arg @ref LL_DMA_REQUEST_2
+  *         @arg @ref LL_DMA_REQUEST_3
+  *         @arg @ref LL_DMA_REQUEST_4
+  *         @arg @ref LL_DMA_REQUEST_5
+  *         @arg @ref LL_DMA_REQUEST_6
+  *         @arg @ref LL_DMA_REQUEST_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_SetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel, uint32_t Request)
+{
+  MODIFY_REG(((DMA_request_TypeDef*)((uint32_t)((uint32_t)DMAx + DMA_CSELR_OFFSET)))->CSELR, DMA_CSELR_C1S << ((Channel-1)*4), Request << POSITION_VAL(DMA_CSELR_C1S << ((Channel-1)*4)));
+}
+
+/**
+  * @brief  Get DMA request for DMA instance on Channel x.
+  * @rmtoll CSELR        C1S           LL_DMA_GetPeriphRequest\n
+  *         CSELR        C2S           LL_DMA_GetPeriphRequest\n
+  *         CSELR        C3S           LL_DMA_GetPeriphRequest\n
+  *         CSELR        C4S           LL_DMA_GetPeriphRequest\n
+  *         CSELR        C5S           LL_DMA_GetPeriphRequest\n
+  *         CSELR        C6S           LL_DMA_GetPeriphRequest\n
+  *         CSELR        C7S           LL_DMA_GetPeriphRequest
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_DMA_REQUEST_0
+  *         @arg @ref LL_DMA_REQUEST_1
+  *         @arg @ref LL_DMA_REQUEST_2
+  *         @arg @ref LL_DMA_REQUEST_3
+  *         @arg @ref LL_DMA_REQUEST_4
+  *         @arg @ref LL_DMA_REQUEST_5
+  *         @arg @ref LL_DMA_REQUEST_6
+  *         @arg @ref LL_DMA_REQUEST_7
+  */
+__STATIC_INLINE uint32_t LL_DMA_GetPeriphRequest(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_request_TypeDef*)((uint32_t)((uint32_t)DMAx + DMA_CSELR_OFFSET)))->CSELR, DMA_CSELR_C1S << ((Channel-1)*4)) >> POSITION_VAL(DMA_CSELR_C1S << ((Channel-1)*4)));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+
+/**
+  * @brief  Get Channel 1 global interrupt flag.
+  * @rmtoll ISR          GIF1          LL_DMA_IsActiveFlag_GI1
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI1(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF1) == (DMA_ISR_GIF1));
+}
+
+/**
+  * @brief  Get Channel 2 global interrupt flag.
+  * @rmtoll ISR          GIF2          LL_DMA_IsActiveFlag_GI2
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI2(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF2) == (DMA_ISR_GIF2));
+}
+
+/**
+  * @brief  Get Channel 3 global interrupt flag.
+  * @rmtoll ISR          GIF3          LL_DMA_IsActiveFlag_GI3
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI3(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF3) == (DMA_ISR_GIF3));
+}
+
+/**
+  * @brief  Get Channel 4 global interrupt flag.
+  * @rmtoll ISR          GIF4          LL_DMA_IsActiveFlag_GI4
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI4(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF4) == (DMA_ISR_GIF4));
+}
+
+/**
+  * @brief  Get Channel 5 global interrupt flag.
+  * @rmtoll ISR          GIF5          LL_DMA_IsActiveFlag_GI5
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI5(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF5) == (DMA_ISR_GIF5));
+}
+
+/**
+  * @brief  Get Channel 6 global interrupt flag.
+  * @rmtoll ISR          GIF6          LL_DMA_IsActiveFlag_GI6
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI6(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF6) == (DMA_ISR_GIF6));
+}
+
+/**
+  * @brief  Get Channel 7 global interrupt flag.
+  * @rmtoll ISR          GIF7          LL_DMA_IsActiveFlag_GI7
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_GI7(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_GIF7) == (DMA_ISR_GIF7));
+}
+
+/**
+  * @brief  Get Channel 1 transfer complete flag.
+  * @rmtoll ISR          TCIF1         LL_DMA_IsActiveFlag_TC1
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF1) == (DMA_ISR_TCIF1));
+}
+
+/**
+  * @brief  Get Channel 2 transfer complete flag.
+  * @rmtoll ISR          TCIF2         LL_DMA_IsActiveFlag_TC2
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF2) == (DMA_ISR_TCIF2));
+}
+
+/**
+  * @brief  Get Channel 3 transfer complete flag.
+  * @rmtoll ISR          TCIF3         LL_DMA_IsActiveFlag_TC3
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF3) == (DMA_ISR_TCIF3));
+}
+
+/**
+  * @brief  Get Channel 4 transfer complete flag.
+  * @rmtoll ISR          TCIF4         LL_DMA_IsActiveFlag_TC4
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF4) == (DMA_ISR_TCIF4));
+}
+
+/**
+  * @brief  Get Channel 5 transfer complete flag.
+  * @rmtoll ISR          TCIF5         LL_DMA_IsActiveFlag_TC5
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF5) == (DMA_ISR_TCIF5));
+}
+
+/**
+  * @brief  Get Channel 6 transfer complete flag.
+  * @rmtoll ISR          TCIF6         LL_DMA_IsActiveFlag_TC6
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF6) == (DMA_ISR_TCIF6));
+}
+
+/**
+  * @brief  Get Channel 7 transfer complete flag.
+  * @rmtoll ISR          TCIF7         LL_DMA_IsActiveFlag_TC7
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TCIF7) == (DMA_ISR_TCIF7));
+}
+
+/**
+  * @brief  Get Channel 1 half transfer flag.
+  * @rmtoll ISR          HTIF1         LL_DMA_IsActiveFlag_HT1
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF1) == (DMA_ISR_HTIF1));
+}
+
+/**
+  * @brief  Get Channel 2 half transfer flag.
+  * @rmtoll ISR          HTIF2         LL_DMA_IsActiveFlag_HT2
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF2) == (DMA_ISR_HTIF2));
+}
+
+/**
+  * @brief  Get Channel 3 half transfer flag.
+  * @rmtoll ISR          HTIF3         LL_DMA_IsActiveFlag_HT3
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF3) == (DMA_ISR_HTIF3));
+}
+
+/**
+  * @brief  Get Channel 4 half transfer flag.
+  * @rmtoll ISR          HTIF4         LL_DMA_IsActiveFlag_HT4
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF4) == (DMA_ISR_HTIF4));
+}
+
+/**
+  * @brief  Get Channel 5 half transfer flag.
+  * @rmtoll ISR          HTIF5         LL_DMA_IsActiveFlag_HT5
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF5) == (DMA_ISR_HTIF5));
+}
+
+/**
+  * @brief  Get Channel 6 half transfer flag.
+  * @rmtoll ISR          HTIF6         LL_DMA_IsActiveFlag_HT6
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF6) == (DMA_ISR_HTIF6));
+}
+
+/**
+  * @brief  Get Channel 7 half transfer flag.
+  * @rmtoll ISR          HTIF7         LL_DMA_IsActiveFlag_HT7
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_HTIF7) == (DMA_ISR_HTIF7));
+}
+
+/**
+  * @brief  Get Channel 1 transfer error flag.
+  * @rmtoll ISR          TEIF1         LL_DMA_IsActiveFlag_TE1
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF1) == (DMA_ISR_TEIF1));
+}
+
+/**
+  * @brief  Get Channel 2 transfer error flag.
+  * @rmtoll ISR          TEIF2         LL_DMA_IsActiveFlag_TE2
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF2) == (DMA_ISR_TEIF2));
+}
+
+/**
+  * @brief  Get Channel 3 transfer error flag.
+  * @rmtoll ISR          TEIF3         LL_DMA_IsActiveFlag_TE3
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF3) == (DMA_ISR_TEIF3));
+}
+
+/**
+  * @brief  Get Channel 4 transfer error flag.
+  * @rmtoll ISR          TEIF4         LL_DMA_IsActiveFlag_TE4
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF4) == (DMA_ISR_TEIF4));
+}
+
+/**
+  * @brief  Get Channel 5 transfer error flag.
+  * @rmtoll ISR          TEIF5         LL_DMA_IsActiveFlag_TE5
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF5) == (DMA_ISR_TEIF5));
+}
+
+/**
+  * @brief  Get Channel 6 transfer error flag.
+  * @rmtoll ISR          TEIF6         LL_DMA_IsActiveFlag_TE6
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF6) == (DMA_ISR_TEIF6));
+}
+
+/**
+  * @brief  Get Channel 7 transfer error flag.
+  * @rmtoll ISR          TEIF7         LL_DMA_IsActiveFlag_TE7
+  * @param  DMAx DMAx Instance
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef* DMAx)
+{
+  return (READ_BIT(DMAx->ISR, DMA_ISR_TEIF7) == (DMA_ISR_TEIF7));
+}
+
+/**
+  * @brief  Clear Channel 1 global interrupt flag.
+  * @rmtoll IFCR         CGIF1         LL_DMA_ClearFlag_GI1
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI1(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF1);
+}
+
+/**
+  * @brief  Clear Channel 2 global interrupt flag.
+  * @rmtoll IFCR         CGIF2         LL_DMA_ClearFlag_GI2
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI2(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF2);
+}
+
+/**
+  * @brief  Clear Channel 3 global interrupt flag.
+  * @rmtoll IFCR         CGIF3         LL_DMA_ClearFlag_GI3
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI3(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF3);
+}
+
+/**
+  * @brief  Clear Channel 4 global interrupt flag.
+  * @rmtoll IFCR         CGIF4         LL_DMA_ClearFlag_GI4
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI4(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF4);
+}
+
+/**
+  * @brief  Clear Channel 5 global interrupt flag.
+  * @rmtoll IFCR         CGIF5         LL_DMA_ClearFlag_GI5
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI5(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF5);
+}
+
+/**
+  * @brief  Clear Channel 6 global interrupt flag.
+  * @rmtoll IFCR         CGIF6         LL_DMA_ClearFlag_GI6
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI6(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF6);
+}
+
+/**
+  * @brief  Clear Channel 7 global interrupt flag.
+  * @rmtoll IFCR         CGIF7         LL_DMA_ClearFlag_GI7
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_GI7(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CGIF7);
+}
+
+/**
+  * @brief  Clear Channel 1  transfer complete flag.
+  * @rmtoll IFCR         CTCIF1        LL_DMA_ClearFlag_TC1
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF1);
+}
+
+/**
+  * @brief  Clear Channel 2  transfer complete flag.
+  * @rmtoll IFCR         CTCIF2        LL_DMA_ClearFlag_TC2
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF2);
+}
+
+/**
+  * @brief  Clear Channel 3  transfer complete flag.
+  * @rmtoll IFCR         CTCIF3        LL_DMA_ClearFlag_TC3
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF3);
+}
+
+/**
+  * @brief  Clear Channel 4  transfer complete flag.
+  * @rmtoll IFCR         CTCIF4        LL_DMA_ClearFlag_TC4
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF4);
+}
+
+/**
+  * @brief  Clear Channel 5  transfer complete flag.
+  * @rmtoll IFCR         CTCIF5        LL_DMA_ClearFlag_TC5
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF5);
+}
+
+/**
+  * @brief  Clear Channel 6  transfer complete flag.
+  * @rmtoll IFCR         CTCIF6        LL_DMA_ClearFlag_TC6
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF6);
+}
+
+/**
+  * @brief  Clear Channel 7  transfer complete flag.
+  * @rmtoll IFCR         CTCIF7        LL_DMA_ClearFlag_TC7
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTCIF7);
+}
+
+/**
+  * @brief  Clear Channel 1  half transfer flag.
+  * @rmtoll IFCR         CHTIF1        LL_DMA_ClearFlag_HT1
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF1);
+}
+
+/**
+  * @brief  Clear Channel 2  half transfer flag.
+  * @rmtoll IFCR         CHTIF2        LL_DMA_ClearFlag_HT2
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF2);
+}
+
+/**
+  * @brief  Clear Channel 3  half transfer flag.
+  * @rmtoll IFCR         CHTIF3        LL_DMA_ClearFlag_HT3
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF3);
+}
+
+/**
+  * @brief  Clear Channel 4  half transfer flag.
+  * @rmtoll IFCR         CHTIF4        LL_DMA_ClearFlag_HT4
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF4);
+}
+
+/**
+  * @brief  Clear Channel 5  half transfer flag.
+  * @rmtoll IFCR         CHTIF5        LL_DMA_ClearFlag_HT5
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF5);
+}
+
+/**
+  * @brief  Clear Channel 6  half transfer flag.
+  * @rmtoll IFCR         CHTIF6        LL_DMA_ClearFlag_HT6
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF6);
+}
+
+/**
+  * @brief  Clear Channel 7  half transfer flag.
+  * @rmtoll IFCR         CHTIF7        LL_DMA_ClearFlag_HT7
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CHTIF7);
+}
+
+/**
+  * @brief  Clear Channel 1 transfer error flag.
+  * @rmtoll IFCR         CTEIF1        LL_DMA_ClearFlag_TE1
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF1);
+}
+
+/**
+  * @brief  Clear Channel 2 transfer error flag.
+  * @rmtoll IFCR         CTEIF2        LL_DMA_ClearFlag_TE2
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF2);
+}
+
+/**
+  * @brief  Clear Channel 3 transfer error flag.
+  * @rmtoll IFCR         CTEIF3        LL_DMA_ClearFlag_TE3
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF3);
+}
+
+/**
+  * @brief  Clear Channel 4 transfer error flag.
+  * @rmtoll IFCR         CTEIF4        LL_DMA_ClearFlag_TE4
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF4);
+}
+
+/**
+  * @brief  Clear Channel 5 transfer error flag.
+  * @rmtoll IFCR         CTEIF5        LL_DMA_ClearFlag_TE5
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF5);
+}
+
+/**
+  * @brief  Clear Channel 6 transfer error flag.
+  * @rmtoll IFCR         CTEIF6        LL_DMA_ClearFlag_TE6
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF6);
+}
+
+/**
+  * @brief  Clear Channel 7 transfer error flag.
+  * @rmtoll IFCR         CTEIF7        LL_DMA_ClearFlag_TE7
+  * @param  DMAx DMAx Instance
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef* DMAx)
+{
+  SET_BIT(DMAx->IFCR, DMA_IFCR_CTEIF7);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_LL_EF_IT_Management IT_Management
+  * @{
+  */
+/**
+  * @brief  Enable Transfer complete interrupt.
+  * @rmtoll CCR          TCIE          LL_DMA_EnableIT_TC
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+  * @brief  Enable Half transfer interrupt.
+  * @rmtoll CCR          HTIE          LL_DMA_EnableIT_HT
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+  * @brief  Enable Transfer error interrupt.
+  * @rmtoll CCR          TEIE          LL_DMA_EnableIT_TE
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  SET_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+  * @brief  Disable Transfer complete interrupt.
+  * @rmtoll CCR          TCIE          LL_DMA_DisableIT_TC
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_TCIE);
+}
+
+/**
+  * @brief  Disable Half transfer interrupt.
+  * @rmtoll CCR          HTIE          LL_DMA_DisableIT_HT
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_HTIE);
+}
+
+/**
+  * @brief  Disable Transfer error interrupt.
+  * @rmtoll CCR          TEIE          LL_DMA_DisableIT_TE
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  CLEAR_BIT(((DMA_Channel_TypeDef *)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel - 1])))->CCR, DMA_CCR_TEIE);
+}
+
+/**
+  * @brief  Check if Transfer complete Interrup is enabled.
+  * @rmtoll CCR          TCIE          LL_DMA_IsEnabledIT_TC
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_TCIE) == (DMA_CCR_TCIE));
+}
+
+/**
+  * @brief  Check if Half transfer Interrup is enabled.
+  * @rmtoll CCR          HTIE          LL_DMA_IsEnabledIT_HT
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_HTIE) == (DMA_CCR_HTIE));
+}
+
+/**
+  * @brief  Check if Transfer error Interrup is enabled.
+  * @rmtoll CCR          TEIE          LL_DMA_IsEnabledIT_TE
+  * @param  DMAx DMAx Instance
+  * @param  Channel This parameter can be one of the following values:
+  *         @arg @ref LL_DMA_CHANNEL_1
+  *         @arg @ref LL_DMA_CHANNEL_2
+  *         @arg @ref LL_DMA_CHANNEL_3
+  *         @arg @ref LL_DMA_CHANNEL_4
+  *         @arg @ref LL_DMA_CHANNEL_5
+  *         @arg @ref LL_DMA_CHANNEL_6
+  *         @arg @ref LL_DMA_CHANNEL_7
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Channel)
+{
+  return (READ_BIT(((DMA_Channel_TypeDef*)((uint32_t)((uint32_t)DMAx + CHANNEL_OFFSET_TAB[Channel-1])))->CCR, DMA_CCR_TEIE) == (DMA_CCR_TEIE));
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* DMA1 || DMA2 */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+