Eric Lewiston
Hal Drivers for L4
Dependents: BSP OneHopeOnePrayer FINAL_AUDIO_RECORD AudioDemo
Fork of
STM32L4xx_HAL_Driver
by 
Senior Design: Sound Monitor
Diff: Inc/stm32l4xx_ll_fmc.h
- Revision:
- 0:80ee8f3b695e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Inc/stm32l4xx_ll_fmc.h Mon Nov 02 19:37:23 2015 +0000
@@ -0,0 +1,906 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 16-September-2015
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_FMC_H
+#define __STM32L4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC_LL FMC Low Layer
+ * @{
+ */
+
+/** @addtogroup FMC_LL_Private_Macros FMC Low Layer Private Macros
+ * @{
+ */
+#define IS_FMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FMC_NORSRAM_BANK1) || \
+ ((__BANK__) == FMC_NORSRAM_BANK2) || \
+ ((__BANK__) == FMC_NORSRAM_BANK3) || \
+ ((__BANK__) == FMC_NORSRAM_BANK4))
+
+
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+
+
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_128) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_256) || \
+ ((__SIZE__) == FMC_PAGE_SIZE_1024))
+
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+
+#define IS_FMC_CONTINOUS_CLOCK(__CCLOCK__) (((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((__CCLOCK__) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \
+ ((__FIFO__) == FMC_WRITE_FIFO_ENABLE))
+
+
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FMC_ACCESS_MODE_D))
+
+
+#define IS_FMC_NAND_BANK(__BANK__) ((__BANK__) == FMC_NAND_BANK3)
+
+#define IS_FMC_WAIT_FEATURE(__FEATURE__) (((__FEATURE__) == FMC_NAND_WAIT_FEATURE_DISABLE) || \
+ ((__FEATURE__) == FMC_NAND_WAIT_FEATURE_ENABLE))
+
+#define IS_FMC_NAND_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NAND_MEM_BUS_WIDTH_16))
+
+#define IS_FMC_ECC_STATE(__STATE__) (((__STATE__) == FMC_NAND_ECC_DISABLE) || \
+ ((__STATE__) == FMC_NAND_ECC_ENABLE))
+
+
+#define IS_FMC_ECCPAGE_SIZE(__SIZE__) (((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((__SIZE__) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+
+/** @defgroup FMC_NORSRAM_Device_Instance FMC NOR/SRAM Device Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance FMC NOR/SRAM EXTENDED Device Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Device_Instance FMC NAND Device Instance
+ * @{
+ */
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+/**
+ * @}
+ */
+
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+
+
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+/** @defgroup FMC_Address_Setup_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Hold_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Setup_Time
+ * @{
+ */
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Bus_Turn_around_Duration
+ * @{
+ */
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_CLK_Division
+ * @{
+ */
+#define IS_FMC_CLK_DIV(__DIV__) (((__DIV__) > 1) && ((__DIV__) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Latency
+ * @{
+ */
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TCLR_Setup_Time FMC TCLR Setup Time
+ * @{
+ */
+#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TAR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TAR_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Setup_Time
+ * @{
+ */
+#define IS_FMC_SETUP_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Setup_Time
+ * @{
+ */
+#define IS_FMC_WAIT_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Hold_Setup_Time
+ * @{
+ */
+#define IS_FMC_HOLD_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_HiZ_Setup_Time
+ * @{
+ */
+#define IS_FMC_HIZ_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @addtogroup FMC_LL_Exported_Typedef FMC Low Layer Exported Typedef
+ * @{
+ */
+#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+#define FMC_NAND_TypeDef FMC_Bank3_TypeDef
+
+#define FMC_NORSRAM_DEVICE FMC_Bank1_R
+#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E_R
+#define FMC_NAND_DEVICE FMC_Bank3_R
+
+/**
+ * @brief FMC_NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC_NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC_NAND Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants
+ * @{
+ */
+
+/** @defgroup FMC_NOR_SRAM_Exported_constants FMC NOR/SRAM Exported constants
+ * @{
+ */
+
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)FMC_BCRx_MUXEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)FMC_BCRx_MTYP_0)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)FMC_BCRx_MTYP_1)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)FMC_BCRx_MWID_0)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)FMC_BCRx_MWID_1)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NORSRAM Flash Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)FMC_BCRx_FACCEN)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)FMC_BCRx_BURSTEN)
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)FMC_BCRx_WAITPOL)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)FMC_BCRx_WAITCFG)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)FMC_BCRx_WREN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)FMC_BCRx_WAITEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)FMC_BCRx_EXTMOD)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)FMC_BCRx_ASYNCWAIT)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Page_Size FMC Page Size
+ * @{
+ */
+#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000)
+#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCRx_CPSIZE_0)
+#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCRx_CPSIZE_1)
+#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCRx_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)FMC_BCRx_CBURSTRW)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock FMC Continous Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)FMC_BCR1_CCLKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO
+ * @{
+ */
+#define FMC_WRITE_FIFO_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_FIFO_ENABLE ((uint32_t)FMC_BCR1_WFDIS)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode FMC Access Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B ((uint32_t)FMC_BTRx_ACCMOD_0)
+#define FMC_ACCESS_MODE_C ((uint32_t)FMC_BTRx_ACCMOD_1)
+#define FMC_ACCESS_MODE_D ((uint32_t)(FMC_BTRx_ACCMOD_0|FMC_BTRx_ACCMOD_1))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Controller FMC NAND Exported constants
+ * @{
+ */
+
+/** @defgroup FMC_NAND_Bank FMC NAND Bank
+ * @{
+ */
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+ * @{
+ */
+#define FMC_NAND_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_WAIT_FEATURE_ENABLE ((uint32_t)FMC_PCR_PWAITEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)FMC_PCR_PTYP)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
+ * @{
+ */
+#define FMC_NAND_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NAND_MEM_BUS_WIDTH_16 ((uint32_t)FMC_PCR_PWID_0)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC FMC NAND ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)FMC_PCR_ECCEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size FMC NAND ECC Page Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)FMC_PCR_ECCPS_0)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)FMC_PCR_ECCPS_1)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)FMC_PCR_ECCPS_0|FMC_PCR_ECCPS_1)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)FMC_PCR_ECCPS_2)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)FMC_PCR_ECCPS_0|FMC_PCR_ECCPS_2)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt_definition FMC Interrupt definition
+ * @brief FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)FMC_SR_IREN)
+#define FMC_IT_LEVEL ((uint32_t)FMC_SR_ILEN)
+#define FMC_IT_FALLING_EDGE ((uint32_t)FMC_SR_IFEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Flag_definition FMC Flag definition
+ * @brief FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)FMC_SR_IRS)
+#define FMC_FLAG_LEVEL ((uint32_t)FMC_SR_ILS)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)FMC_SR_IFS)
+#define FMC_FLAG_FEMPT ((uint32_t)FMC_SR_FEMPT)
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FMC_Exported_Macros FMC Low Layer Exported Macros
+ * @{
+ */
+
+/** @defgroup FMC_NOR_Macros FMC NOR/SRAM Exported Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) SET_BIT((__INSTANCE__)->BTCR[(__BANK__)], FMC_BCRx_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->BTCR[(__BANK__)], FMC_BCRx_MBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Macros FMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval none
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) SET_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN)
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) CLEAR_BIT((__INSTANCE__)->PCR, FMC_PCR_PBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt FMC Interrupt
+ * @brief macros to handle FMC interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) SET_BIT((__INSTANCE__)->SR, (__INTERRUPT__))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) CLEAR_BIT((__INSTANCE__)->SR, (__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) CLEAR_BIT((__INSTANCE__)->SR, (__FLAG__))
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions
+ * @{
+ */
+
+/* FMC_LL_NORSRAM Controller functions *******************************************/
+/** @addgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @addtogroup FMC_LL_NORSRAM_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* FMC_NORSRAM Control functions */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/* FMC_NAND Controller functions **********************************************/
+/** @addtogroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Exported_Functions_Group2 FMC Low Layer Peripheral Control functions
+ * @{
+ */
+/* FMC_NAND Control functions */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+