Hal Drivers for L4

Dependents:   BSP OneHopeOnePrayer FINAL_AUDIO_RECORD AudioDemo

Fork of STM32L4xx_HAL_Driver by Senior Design: Sound Monitor

Committer:
EricLew
Date:
Wed Nov 25 17:30:43 2015 +0000
Revision:
2:7aef7655b0a8
Parent:
0:80ee8f3b695e
commit;

Who changed what in which revision?

UserRevisionLine numberNew contents of line
EricLew 0:80ee8f3b695e 1 /**
EricLew 0:80ee8f3b695e 2 ******************************************************************************
EricLew 0:80ee8f3b695e 3 * @file stm32l4xx_hal_uart_ex.c
EricLew 0:80ee8f3b695e 4 * @author MCD Application Team
EricLew 0:80ee8f3b695e 5 * @version V1.1.0
EricLew 0:80ee8f3b695e 6 * @date 16-September-2015
EricLew 0:80ee8f3b695e 7 * @brief Extended UART HAL module driver.
EricLew 0:80ee8f3b695e 8 * This file provides firmware functions to manage the following extended
EricLew 0:80ee8f3b695e 9 * functionalities of the Universal Asynchronous Receiver Transmitter Peripheral (UART).
EricLew 0:80ee8f3b695e 10 * + Initialization and de-initialization functions
EricLew 0:80ee8f3b695e 11 * + Peripheral Control functions
EricLew 0:80ee8f3b695e 12 *
EricLew 0:80ee8f3b695e 13 *
EricLew 0:80ee8f3b695e 14 @verbatim
EricLew 0:80ee8f3b695e 15 ==============================================================================
EricLew 0:80ee8f3b695e 16 ##### UART peripheral extended features #####
EricLew 0:80ee8f3b695e 17 ==============================================================================
EricLew 0:80ee8f3b695e 18
EricLew 0:80ee8f3b695e 19 (#) Declare a UART_HandleTypeDef handle structure.
EricLew 0:80ee8f3b695e 20
EricLew 0:80ee8f3b695e 21 (#) For the UART RS485 Driver Enable mode, initialize the UART registers
EricLew 0:80ee8f3b695e 22 by calling the HAL_RS485Ex_Init() API.
EricLew 0:80ee8f3b695e 23
EricLew 0:80ee8f3b695e 24
EricLew 0:80ee8f3b695e 25 @endverbatim
EricLew 0:80ee8f3b695e 26 ******************************************************************************
EricLew 0:80ee8f3b695e 27 * @attention
EricLew 0:80ee8f3b695e 28 *
EricLew 0:80ee8f3b695e 29 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
EricLew 0:80ee8f3b695e 30 *
EricLew 0:80ee8f3b695e 31 * Redistribution and use in source and binary forms, with or without modification,
EricLew 0:80ee8f3b695e 32 * are permitted provided that the following conditions are met:
EricLew 0:80ee8f3b695e 33 * 1. Redistributions of source code must retain the above copyright notice,
EricLew 0:80ee8f3b695e 34 * this list of conditions and the following disclaimer.
EricLew 0:80ee8f3b695e 35 * 2. Redistributions in binary form must reproduce the above copyright notice,
EricLew 0:80ee8f3b695e 36 * this list of conditions and the following disclaimer in the documentation
EricLew 0:80ee8f3b695e 37 * and/or other materials provided with the distribution.
EricLew 0:80ee8f3b695e 38 * 3. Neither the name of STMicroelectronics nor the names of its contributors
EricLew 0:80ee8f3b695e 39 * may be used to endorse or promote products derived from this software
EricLew 0:80ee8f3b695e 40 * without specific prior written permission.
EricLew 0:80ee8f3b695e 41 *
EricLew 0:80ee8f3b695e 42 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
EricLew 0:80ee8f3b695e 43 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
EricLew 0:80ee8f3b695e 44 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
EricLew 0:80ee8f3b695e 45 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
EricLew 0:80ee8f3b695e 46 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
EricLew 0:80ee8f3b695e 47 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
EricLew 0:80ee8f3b695e 48 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
EricLew 0:80ee8f3b695e 49 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
EricLew 0:80ee8f3b695e 50 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
EricLew 0:80ee8f3b695e 51 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
EricLew 0:80ee8f3b695e 52 *
EricLew 0:80ee8f3b695e 53 ******************************************************************************
EricLew 0:80ee8f3b695e 54 */
EricLew 0:80ee8f3b695e 55
EricLew 0:80ee8f3b695e 56 /* Includes ------------------------------------------------------------------*/
EricLew 0:80ee8f3b695e 57 #include "stm32l4xx_hal.h"
EricLew 0:80ee8f3b695e 58
EricLew 0:80ee8f3b695e 59 /** @addtogroup STM32L4xx_HAL_Driver
EricLew 0:80ee8f3b695e 60 * @{
EricLew 0:80ee8f3b695e 61 */
EricLew 0:80ee8f3b695e 62
EricLew 0:80ee8f3b695e 63 /** @defgroup UARTEx UARTEx
EricLew 0:80ee8f3b695e 64 * @brief UART Extended HAL module driver
EricLew 0:80ee8f3b695e 65 * @{
EricLew 0:80ee8f3b695e 66 */
EricLew 0:80ee8f3b695e 67
EricLew 0:80ee8f3b695e 68 #ifdef HAL_UART_MODULE_ENABLED
EricLew 0:80ee8f3b695e 69
EricLew 0:80ee8f3b695e 70 /* Private typedef -----------------------------------------------------------*/
EricLew 0:80ee8f3b695e 71 /* Private define ------------------------------------------------------------*/
EricLew 0:80ee8f3b695e 72 /* Private macros ------------------------------------------------------------*/
EricLew 0:80ee8f3b695e 73 /* Private variables ---------------------------------------------------------*/
EricLew 0:80ee8f3b695e 74 /* Private function prototypes -----------------------------------------------*/
EricLew 0:80ee8f3b695e 75 /** @defgroup UARTEx_Private_Functions UARTEx Private Functions
EricLew 0:80ee8f3b695e 76 * @{
EricLew 0:80ee8f3b695e 77 */
EricLew 0:80ee8f3b695e 78 static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
EricLew 0:80ee8f3b695e 79 /**
EricLew 0:80ee8f3b695e 80 * @}
EricLew 0:80ee8f3b695e 81 */
EricLew 0:80ee8f3b695e 82
EricLew 0:80ee8f3b695e 83 /* Exported functions --------------------------------------------------------*/
EricLew 0:80ee8f3b695e 84
EricLew 0:80ee8f3b695e 85 /** @defgroup UARTEx_Exported_Functions UARTEx Exported Functions
EricLew 0:80ee8f3b695e 86 * @{
EricLew 0:80ee8f3b695e 87 */
EricLew 0:80ee8f3b695e 88
EricLew 0:80ee8f3b695e 89 /** @defgroup UARTEx_Exported_Functions_Group1 Initialization and de-initialization functions
EricLew 0:80ee8f3b695e 90 * @brief Extended Initialization and Configuration Functions
EricLew 0:80ee8f3b695e 91 *
EricLew 0:80ee8f3b695e 92 @verbatim
EricLew 0:80ee8f3b695e 93 ===============================================================================
EricLew 0:80ee8f3b695e 94 ##### Initialization and Configuration functions #####
EricLew 0:80ee8f3b695e 95 ===============================================================================
EricLew 0:80ee8f3b695e 96 [..]
EricLew 0:80ee8f3b695e 97 This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
EricLew 0:80ee8f3b695e 98 in asynchronous mode.
EricLew 0:80ee8f3b695e 99 (+) For the asynchronous mode the parameters below can be configured:
EricLew 0:80ee8f3b695e 100 (++) Baud Rate
EricLew 0:80ee8f3b695e 101 (++) Word Length
EricLew 0:80ee8f3b695e 102 (++) Stop Bit
EricLew 0:80ee8f3b695e 103 (++) Parity: If the parity is enabled, then the MSB bit of the data written
EricLew 0:80ee8f3b695e 104 in the data register is transmitted but is changed by the parity bit.
EricLew 0:80ee8f3b695e 105 Depending on the frame length defined by the M1 and M0 bits (7-bit,
EricLew 0:80ee8f3b695e 106 8-bit or 9-bit),
EricLew 0:80ee8f3b695e 107 the possible UART frame formats are as listed in the following table:
EricLew 0:80ee8f3b695e 108
EricLew 0:80ee8f3b695e 109 (+++) Table 1. UART frame format.
EricLew 0:80ee8f3b695e 110 (+++) +-----------------------------------------------------------------------+
EricLew 0:80ee8f3b695e 111 (+++) | M1 bit | M0 bit | PCE bit | UART frame |
EricLew 0:80ee8f3b695e 112 (+++) |---------|---------|-----------|---------------------------------------|
EricLew 0:80ee8f3b695e 113 (+++) | 0 | 0 | 0 | | SB | 8 bit data | STB | |
EricLew 0:80ee8f3b695e 114 (+++) |---------|---------|-----------|---------------------------------------|
EricLew 0:80ee8f3b695e 115 (+++) | 0 | 0 | 1 | | SB | 7 bit data | PB | STB | |
EricLew 0:80ee8f3b695e 116 (+++) |---------|---------|-----------|---------------------------------------|
EricLew 0:80ee8f3b695e 117 (+++) | 0 | 1 | 0 | | SB | 9 bit data | STB | |
EricLew 0:80ee8f3b695e 118 (+++) |---------|---------|-----------|---------------------------------------|
EricLew 0:80ee8f3b695e 119 (+++) | 0 | 1 | 1 | | SB | 8 bit data | PB | STB | |
EricLew 0:80ee8f3b695e 120 (+++) |---------|---------|-----------|---------------------------------------|
EricLew 0:80ee8f3b695e 121 (+++) | 1 | 0 | 0 | | SB | 7 bit data | STB | |
EricLew 0:80ee8f3b695e 122 (+++) |---------|---------|-----------|---------------------------------------|
EricLew 0:80ee8f3b695e 123 (+++) | 1 | 0 | 1 | | SB | 6 bit data | PB | STB | |
EricLew 0:80ee8f3b695e 124 (+++) +-----------------------------------------------------------------------+
EricLew 0:80ee8f3b695e 125 (++) Hardware flow control
EricLew 0:80ee8f3b695e 126 (++) Receiver/transmitter modes
EricLew 0:80ee8f3b695e 127 (++) Over Sampling Method
EricLew 0:80ee8f3b695e 128 (++) One-Bit Sampling Method
EricLew 0:80ee8f3b695e 129 (+) For the asynchronous mode, the following advanced features can be configured as well:
EricLew 0:80ee8f3b695e 130 (++) TX and/or RX pin level inversion
EricLew 0:80ee8f3b695e 131 (++) data logical level inversion
EricLew 0:80ee8f3b695e 132 (++) RX and TX pins swap
EricLew 0:80ee8f3b695e 133 (++) RX overrun detection disabling
EricLew 0:80ee8f3b695e 134 (++) DMA disabling on RX error
EricLew 0:80ee8f3b695e 135 (++) MSB first on communication line
EricLew 0:80ee8f3b695e 136 (++) auto Baud rate detection
EricLew 0:80ee8f3b695e 137 [..]
EricLew 0:80ee8f3b695e 138 The HAL_RS485Ex_Init() API follows the UART RS485 mode configuration
EricLew 0:80ee8f3b695e 139 procedures (details for the procedures are available in reference manual).
EricLew 0:80ee8f3b695e 140
EricLew 0:80ee8f3b695e 141 @endverbatim
EricLew 0:80ee8f3b695e 142 * @{
EricLew 0:80ee8f3b695e 143 */
EricLew 0:80ee8f3b695e 144
EricLew 0:80ee8f3b695e 145 /**
EricLew 0:80ee8f3b695e 146 * @brief Initialize the RS485 Driver enable feature according to the specified
EricLew 0:80ee8f3b695e 147 * parameters in the UART_InitTypeDef and creates the associated handle.
EricLew 0:80ee8f3b695e 148 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 149 * @param Polarity: select the driver enable polarity.
EricLew 0:80ee8f3b695e 150 * This parameter can be one of the following values:
EricLew 0:80ee8f3b695e 151 * @arg UART_DE_POLARITY_HIGH: DE signal is active high
EricLew 0:80ee8f3b695e 152 * @arg UART_DE_POLARITY_LOW: DE signal is active low
EricLew 0:80ee8f3b695e 153 * @param AssertionTime: Driver Enable assertion time:
EricLew 0:80ee8f3b695e 154 * 5-bit value defining the time between the activation of the DE (Driver Enable)
EricLew 0:80ee8f3b695e 155 * signal and the beginning of the start bit. It is expressed in sample time
EricLew 0:80ee8f3b695e 156 * units (1/8 or 1/16 bit time, depending on the oversampling rate)
EricLew 0:80ee8f3b695e 157 * @param DeassertionTime: Driver Enable deassertion time:
EricLew 0:80ee8f3b695e 158 * 5-bit value defining the time between the end of the last stop bit, in a
EricLew 0:80ee8f3b695e 159 * transmitted message, and the de-activation of the DE (Driver Enable) signal.
EricLew 0:80ee8f3b695e 160 * It is expressed in sample time units (1/8 or 1/16 bit time, depending on the
EricLew 0:80ee8f3b695e 161 * oversampling rate).
EricLew 0:80ee8f3b695e 162 * @retval HAL status
EricLew 0:80ee8f3b695e 163 */
EricLew 0:80ee8f3b695e 164 HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime)
EricLew 0:80ee8f3b695e 165 {
EricLew 0:80ee8f3b695e 166 uint32_t temp = 0x0;
EricLew 0:80ee8f3b695e 167
EricLew 0:80ee8f3b695e 168 /* Check the UART handle allocation */
EricLew 0:80ee8f3b695e 169 if(huart == NULL)
EricLew 0:80ee8f3b695e 170 {
EricLew 0:80ee8f3b695e 171 return HAL_ERROR;
EricLew 0:80ee8f3b695e 172 }
EricLew 0:80ee8f3b695e 173 /* Check the Driver Enable UART instance */
EricLew 0:80ee8f3b695e 174 assert_param(IS_UART_DRIVER_ENABLE_INSTANCE(huart->Instance));
EricLew 0:80ee8f3b695e 175
EricLew 0:80ee8f3b695e 176 /* Check the Driver Enable polarity */
EricLew 0:80ee8f3b695e 177 assert_param(IS_UART_DE_POLARITY(Polarity));
EricLew 0:80ee8f3b695e 178
EricLew 0:80ee8f3b695e 179 /* Check the Driver Enable assertion time */
EricLew 0:80ee8f3b695e 180 assert_param(IS_UART_ASSERTIONTIME(AssertionTime));
EricLew 0:80ee8f3b695e 181
EricLew 0:80ee8f3b695e 182 /* Check the Driver Enable deassertion time */
EricLew 0:80ee8f3b695e 183 assert_param(IS_UART_DEASSERTIONTIME(DeassertionTime));
EricLew 0:80ee8f3b695e 184
EricLew 0:80ee8f3b695e 185 if(huart->State == HAL_UART_STATE_RESET)
EricLew 0:80ee8f3b695e 186 {
EricLew 0:80ee8f3b695e 187 /* Allocate lock resource and initialize it */
EricLew 0:80ee8f3b695e 188 huart->Lock = HAL_UNLOCKED;
EricLew 0:80ee8f3b695e 189
EricLew 0:80ee8f3b695e 190 /* Init the low level hardware : GPIO, CLOCK, CORTEX */
EricLew 0:80ee8f3b695e 191 HAL_UART_MspInit(huart);
EricLew 0:80ee8f3b695e 192 }
EricLew 0:80ee8f3b695e 193
EricLew 0:80ee8f3b695e 194 huart->State = HAL_UART_STATE_BUSY;
EricLew 0:80ee8f3b695e 195
EricLew 0:80ee8f3b695e 196 /* Disable the Peripheral */
EricLew 0:80ee8f3b695e 197 __HAL_UART_DISABLE(huart);
EricLew 0:80ee8f3b695e 198
EricLew 0:80ee8f3b695e 199 /* Set the UART Communication parameters */
EricLew 0:80ee8f3b695e 200 if (UART_SetConfig(huart) == HAL_ERROR)
EricLew 0:80ee8f3b695e 201 {
EricLew 0:80ee8f3b695e 202 return HAL_ERROR;
EricLew 0:80ee8f3b695e 203 }
EricLew 0:80ee8f3b695e 204
EricLew 0:80ee8f3b695e 205 if(huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
EricLew 0:80ee8f3b695e 206 {
EricLew 0:80ee8f3b695e 207 UART_AdvFeatureConfig(huart);
EricLew 0:80ee8f3b695e 208 }
EricLew 0:80ee8f3b695e 209
EricLew 0:80ee8f3b695e 210 /* Enable the Driver Enable mode by setting the DEM bit in the CR3 register */
EricLew 0:80ee8f3b695e 211 SET_BIT(huart->Instance->CR3, USART_CR3_DEM);
EricLew 0:80ee8f3b695e 212
EricLew 0:80ee8f3b695e 213 /* Set the Driver Enable polarity */
EricLew 0:80ee8f3b695e 214 MODIFY_REG(huart->Instance->CR3, USART_CR3_DEP, Polarity);
EricLew 0:80ee8f3b695e 215
EricLew 0:80ee8f3b695e 216 /* Set the Driver Enable assertion and deassertion times */
EricLew 0:80ee8f3b695e 217 temp = (AssertionTime << UART_CR1_DEAT_ADDRESS_LSB_POS);
EricLew 0:80ee8f3b695e 218 temp |= (DeassertionTime << UART_CR1_DEDT_ADDRESS_LSB_POS);
EricLew 0:80ee8f3b695e 219 MODIFY_REG(huart->Instance->CR1, (USART_CR1_DEDT|USART_CR1_DEAT), temp);
EricLew 0:80ee8f3b695e 220
EricLew 0:80ee8f3b695e 221 /* Enable the Peripheral */
EricLew 0:80ee8f3b695e 222 __HAL_UART_ENABLE(huart);
EricLew 0:80ee8f3b695e 223
EricLew 0:80ee8f3b695e 224 /* TEACK and/or REACK to check before moving huart->State to Ready */
EricLew 0:80ee8f3b695e 225 return (UART_CheckIdleState(huart));
EricLew 0:80ee8f3b695e 226 }
EricLew 0:80ee8f3b695e 227
EricLew 0:80ee8f3b695e 228
EricLew 0:80ee8f3b695e 229 /**
EricLew 0:80ee8f3b695e 230 * @}
EricLew 0:80ee8f3b695e 231 */
EricLew 0:80ee8f3b695e 232
EricLew 0:80ee8f3b695e 233 /** @defgroup UARTEx_Exported_Functions_Group3 Peripheral Control functions
EricLew 0:80ee8f3b695e 234 * @brief Extended Peripheral Control functions
EricLew 0:80ee8f3b695e 235 *
EricLew 0:80ee8f3b695e 236 @verbatim
EricLew 0:80ee8f3b695e 237 ===============================================================================
EricLew 0:80ee8f3b695e 238 ##### Peripheral Control functions #####
EricLew 0:80ee8f3b695e 239 ===============================================================================
EricLew 0:80ee8f3b695e 240 [..] This section provides the following functions:
EricLew 0:80ee8f3b695e 241 (+) HAL_UARTEx_EnableClockStopMode() API enables the UART clock (HSI or LSE only) during stop mode
EricLew 0:80ee8f3b695e 242 (+) HAL_UARTEx_DisableClockStopMode() API disables the above functionality
EricLew 0:80ee8f3b695e 243 (+) HAL_MultiProcessorEx_AddressLength_Set() API optionally sets the UART node address
EricLew 0:80ee8f3b695e 244 detection length to more than 4 bits for multiprocessor address mark wake up.
EricLew 0:80ee8f3b695e 245 (+) HAL_UARTEx_StopModeWakeUpSourceConfig() API defines the wake-up from stop mode
EricLew 0:80ee8f3b695e 246 trigger: address match, Start Bit detection or RXNE bit status.
EricLew 0:80ee8f3b695e 247 (+) HAL_UARTEx_EnableStopMode() API enables the UART to wake up the MCU from stop mode
EricLew 0:80ee8f3b695e 248 (+) HAL_UARTEx_DisableStopMode() API disables the above functionality
EricLew 0:80ee8f3b695e 249 (+) HAL_UARTEx_WakeupCallback() called upon UART wakeup interrupt
EricLew 0:80ee8f3b695e 250
EricLew 0:80ee8f3b695e 251
EricLew 0:80ee8f3b695e 252 @endverbatim
EricLew 0:80ee8f3b695e 253 * @{
EricLew 0:80ee8f3b695e 254 */
EricLew 0:80ee8f3b695e 255
EricLew 0:80ee8f3b695e 256
EricLew 0:80ee8f3b695e 257
EricLew 0:80ee8f3b695e 258
EricLew 0:80ee8f3b695e 259 /**
EricLew 0:80ee8f3b695e 260 * @brief By default in multiprocessor mode, when the wake up method is set
EricLew 0:80ee8f3b695e 261 * to address mark, the UART handles only 4-bit long addresses detection;
EricLew 0:80ee8f3b695e 262 * this API allows to enable longer addresses detection (6-, 7- or 8-bit
EricLew 0:80ee8f3b695e 263 * long).
EricLew 0:80ee8f3b695e 264 * @note Addresses detection lengths are: 6-bit address detection in 7-bit data mode,
EricLew 0:80ee8f3b695e 265 * 7-bit address detection in 8-bit data mode, 8-bit address detection in 9-bit data mode.
EricLew 0:80ee8f3b695e 266 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 267 * @param AddressLength: this parameter can be one of the following values:
EricLew 0:80ee8f3b695e 268 * @arg UART_ADDRESS_DETECT_4B: 4-bit long address
EricLew 0:80ee8f3b695e 269 * @arg UART_ADDRESS_DETECT_7B: 6-, 7- or 8-bit long address
EricLew 0:80ee8f3b695e 270 * @retval HAL status
EricLew 0:80ee8f3b695e 271 */
EricLew 0:80ee8f3b695e 272 HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength)
EricLew 0:80ee8f3b695e 273 {
EricLew 0:80ee8f3b695e 274 /* Check the UART handle allocation */
EricLew 0:80ee8f3b695e 275 if(huart == NULL)
EricLew 0:80ee8f3b695e 276 {
EricLew 0:80ee8f3b695e 277 return HAL_ERROR;
EricLew 0:80ee8f3b695e 278 }
EricLew 0:80ee8f3b695e 279
EricLew 0:80ee8f3b695e 280 /* Check the address length parameter */
EricLew 0:80ee8f3b695e 281 assert_param(IS_UART_ADDRESSLENGTH_DETECT(AddressLength));
EricLew 0:80ee8f3b695e 282
EricLew 0:80ee8f3b695e 283 huart->State = HAL_UART_STATE_BUSY;
EricLew 0:80ee8f3b695e 284
EricLew 0:80ee8f3b695e 285 /* Disable the Peripheral */
EricLew 0:80ee8f3b695e 286 __HAL_UART_DISABLE(huart);
EricLew 0:80ee8f3b695e 287
EricLew 0:80ee8f3b695e 288 /* Set the address length */
EricLew 0:80ee8f3b695e 289 MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, AddressLength);
EricLew 0:80ee8f3b695e 290
EricLew 0:80ee8f3b695e 291 /* Enable the Peripheral */
EricLew 0:80ee8f3b695e 292 __HAL_UART_ENABLE(huart);
EricLew 0:80ee8f3b695e 293
EricLew 0:80ee8f3b695e 294 /* TEACK and/or REACK to check before moving huart->State to Ready */
EricLew 0:80ee8f3b695e 295 return (UART_CheckIdleState(huart));
EricLew 0:80ee8f3b695e 296 }
EricLew 0:80ee8f3b695e 297
EricLew 0:80ee8f3b695e 298
EricLew 0:80ee8f3b695e 299 /**
EricLew 0:80ee8f3b695e 300 * @brief Set Wakeup from Stop mode interrupt flag selection.
EricLew 0:80ee8f3b695e 301 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 302 * @param WakeUpSelection: address match, Start Bit detection or RXNE bit status.
EricLew 0:80ee8f3b695e 303 * This parameter can be one of the following values:
EricLew 0:80ee8f3b695e 304 * @arg UART_WAKEUP_ON_ADDRESS
EricLew 0:80ee8f3b695e 305 * @arg UART_WAKEUP_ON_STARTBIT
EricLew 0:80ee8f3b695e 306 * @arg UART_WAKEUP_ON_READDATA_NONEMPTY
EricLew 0:80ee8f3b695e 307 * @retval HAL status
EricLew 0:80ee8f3b695e 308 */
EricLew 0:80ee8f3b695e 309 HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
EricLew 0:80ee8f3b695e 310 {
EricLew 0:80ee8f3b695e 311 HAL_StatusTypeDef status = HAL_OK;
EricLew 0:80ee8f3b695e 312
EricLew 0:80ee8f3b695e 313 /* check the wake-up from stop mode UART instance */
EricLew 0:80ee8f3b695e 314 assert_param(IS_UART_WAKEUP_FROMSTOP_INSTANCE(huart->Instance));
EricLew 0:80ee8f3b695e 315 /* check the wake-up selection parameter */
EricLew 0:80ee8f3b695e 316 assert_param(IS_UART_WAKEUP_SELECTION(WakeUpSelection.WakeUpEvent));
EricLew 0:80ee8f3b695e 317
EricLew 0:80ee8f3b695e 318 /* Process Locked */
EricLew 0:80ee8f3b695e 319 __HAL_LOCK(huart);
EricLew 0:80ee8f3b695e 320
EricLew 0:80ee8f3b695e 321 huart->State = HAL_UART_STATE_BUSY;
EricLew 0:80ee8f3b695e 322
EricLew 0:80ee8f3b695e 323 /* Disable the Peripheral */
EricLew 0:80ee8f3b695e 324 __HAL_UART_DISABLE(huart);
EricLew 0:80ee8f3b695e 325
EricLew 0:80ee8f3b695e 326 /* Set the wake-up selection scheme */
EricLew 0:80ee8f3b695e 327 MODIFY_REG(huart->Instance->CR3, USART_CR3_WUS, WakeUpSelection.WakeUpEvent);
EricLew 0:80ee8f3b695e 328
EricLew 0:80ee8f3b695e 329 if (WakeUpSelection.WakeUpEvent == UART_WAKEUP_ON_ADDRESS)
EricLew 0:80ee8f3b695e 330 {
EricLew 0:80ee8f3b695e 331 UARTEx_Wakeup_AddressConfig(huart, WakeUpSelection);
EricLew 0:80ee8f3b695e 332 }
EricLew 0:80ee8f3b695e 333
EricLew 0:80ee8f3b695e 334 /* Enable the Peripheral */
EricLew 0:80ee8f3b695e 335 __HAL_UART_ENABLE(huart);
EricLew 0:80ee8f3b695e 336
EricLew 0:80ee8f3b695e 337 /* Wait until REACK flag is set */
EricLew 0:80ee8f3b695e 338 if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
EricLew 0:80ee8f3b695e 339 {
EricLew 0:80ee8f3b695e 340 status = HAL_TIMEOUT;
EricLew 0:80ee8f3b695e 341 }
EricLew 0:80ee8f3b695e 342 else
EricLew 0:80ee8f3b695e 343 {
EricLew 0:80ee8f3b695e 344 /* Initialize the UART State */
EricLew 0:80ee8f3b695e 345 huart->State = HAL_UART_STATE_READY;
EricLew 0:80ee8f3b695e 346 }
EricLew 0:80ee8f3b695e 347
EricLew 0:80ee8f3b695e 348 /* Process Unlocked */
EricLew 0:80ee8f3b695e 349 __HAL_UNLOCK(huart);
EricLew 0:80ee8f3b695e 350
EricLew 0:80ee8f3b695e 351 return status;
EricLew 0:80ee8f3b695e 352 }
EricLew 0:80ee8f3b695e 353
EricLew 0:80ee8f3b695e 354
EricLew 0:80ee8f3b695e 355 /**
EricLew 0:80ee8f3b695e 356 * @brief Enable UART Stop Mode.
EricLew 0:80ee8f3b695e 357 * @note The UART is able to wake up the MCU from Stop 1 mode as long as UART clock is HSI or LSE.
EricLew 0:80ee8f3b695e 358 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 359 * @retval HAL status
EricLew 0:80ee8f3b695e 360 */
EricLew 0:80ee8f3b695e 361 HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart)
EricLew 0:80ee8f3b695e 362 {
EricLew 0:80ee8f3b695e 363 /* Process Locked */
EricLew 0:80ee8f3b695e 364 __HAL_LOCK(huart);
EricLew 0:80ee8f3b695e 365
EricLew 0:80ee8f3b695e 366 huart->State = HAL_UART_STATE_BUSY;
EricLew 0:80ee8f3b695e 367
EricLew 0:80ee8f3b695e 368 /* Set UESM bit */
EricLew 0:80ee8f3b695e 369 SET_BIT(huart->Instance->CR1, USART_CR1_UESM);
EricLew 0:80ee8f3b695e 370
EricLew 0:80ee8f3b695e 371 huart->State = HAL_UART_STATE_READY;
EricLew 0:80ee8f3b695e 372
EricLew 0:80ee8f3b695e 373 /* Process Unlocked */
EricLew 0:80ee8f3b695e 374 __HAL_UNLOCK(huart);
EricLew 0:80ee8f3b695e 375
EricLew 0:80ee8f3b695e 376 return HAL_OK;
EricLew 0:80ee8f3b695e 377 }
EricLew 0:80ee8f3b695e 378
EricLew 0:80ee8f3b695e 379 /**
EricLew 0:80ee8f3b695e 380 * @brief Disable UART Stop Mode.
EricLew 0:80ee8f3b695e 381 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 382 * @retval HAL status
EricLew 0:80ee8f3b695e 383 */
EricLew 0:80ee8f3b695e 384 HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart)
EricLew 0:80ee8f3b695e 385 {
EricLew 0:80ee8f3b695e 386 /* Process Locked */
EricLew 0:80ee8f3b695e 387 __HAL_LOCK(huart);
EricLew 0:80ee8f3b695e 388
EricLew 0:80ee8f3b695e 389 huart->State = HAL_UART_STATE_BUSY;
EricLew 0:80ee8f3b695e 390
EricLew 0:80ee8f3b695e 391 /* Clear UESM bit */
EricLew 0:80ee8f3b695e 392 CLEAR_BIT(huart->Instance->CR1, USART_CR1_UESM);
EricLew 0:80ee8f3b695e 393
EricLew 0:80ee8f3b695e 394 huart->State = HAL_UART_STATE_READY;
EricLew 0:80ee8f3b695e 395
EricLew 0:80ee8f3b695e 396 /* Process Unlocked */
EricLew 0:80ee8f3b695e 397 __HAL_UNLOCK(huart);
EricLew 0:80ee8f3b695e 398
EricLew 0:80ee8f3b695e 399 return HAL_OK;
EricLew 0:80ee8f3b695e 400 }
EricLew 0:80ee8f3b695e 401
EricLew 0:80ee8f3b695e 402 /**
EricLew 0:80ee8f3b695e 403 * @brief UART wakeup from Stop mode callback.
EricLew 0:80ee8f3b695e 404 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 405 * @retval None
EricLew 0:80ee8f3b695e 406 */
EricLew 0:80ee8f3b695e 407 __weak void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart)
EricLew 0:80ee8f3b695e 408 {
EricLew 0:80ee8f3b695e 409 /* NOTE : This function should not be modified, when the callback is needed,
EricLew 0:80ee8f3b695e 410 the HAL_UARTEx_WakeupCallback can be implemented in the user file.
EricLew 0:80ee8f3b695e 411 */
EricLew 0:80ee8f3b695e 412 }
EricLew 0:80ee8f3b695e 413
EricLew 0:80ee8f3b695e 414 /**
EricLew 0:80ee8f3b695e 415 * @}
EricLew 0:80ee8f3b695e 416 */
EricLew 0:80ee8f3b695e 417
EricLew 0:80ee8f3b695e 418 /**
EricLew 0:80ee8f3b695e 419 * @}
EricLew 0:80ee8f3b695e 420 */
EricLew 0:80ee8f3b695e 421
EricLew 0:80ee8f3b695e 422 /** @addtogroup UARTEx_Private_Functions
EricLew 0:80ee8f3b695e 423 * @{
EricLew 0:80ee8f3b695e 424 */
EricLew 0:80ee8f3b695e 425
EricLew 0:80ee8f3b695e 426 /**
EricLew 0:80ee8f3b695e 427 * @brief Initialize the UART wake-up from stop mode parameters when triggered by address detection.
EricLew 0:80ee8f3b695e 428 * @param huart: UART handle.
EricLew 0:80ee8f3b695e 429 * @param WakeUpSelection: UART wake up from stop mode parameters.
EricLew 0:80ee8f3b695e 430 * @retval None
EricLew 0:80ee8f3b695e 431 */
EricLew 0:80ee8f3b695e 432 static void UARTEx_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection)
EricLew 0:80ee8f3b695e 433 {
EricLew 0:80ee8f3b695e 434 assert_param(IS_UART_ADDRESSLENGTH_DETECT(WakeUpSelection.AddressLength));
EricLew 0:80ee8f3b695e 435
EricLew 0:80ee8f3b695e 436 /* Set the USART address length */
EricLew 0:80ee8f3b695e 437 MODIFY_REG(huart->Instance->CR2, USART_CR2_ADDM7, WakeUpSelection.AddressLength);
EricLew 0:80ee8f3b695e 438
EricLew 0:80ee8f3b695e 439 /* Set the USART address node */
EricLew 0:80ee8f3b695e 440 MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)WakeUpSelection.Address << UART_CR2_ADDRESS_LSB_POS));
EricLew 0:80ee8f3b695e 441 }
EricLew 0:80ee8f3b695e 442
EricLew 0:80ee8f3b695e 443 /**
EricLew 0:80ee8f3b695e 444 * @}
EricLew 0:80ee8f3b695e 445 */
EricLew 0:80ee8f3b695e 446
EricLew 0:80ee8f3b695e 447 #endif /* HAL_UART_MODULE_ENABLED */
EricLew 0:80ee8f3b695e 448
EricLew 0:80ee8f3b695e 449 /**
EricLew 0:80ee8f3b695e 450 * @}
EricLew 0:80ee8f3b695e 451 */
EricLew 0:80ee8f3b695e 452
EricLew 0:80ee8f3b695e 453 /**
EricLew 0:80ee8f3b695e 454 * @}
EricLew 0:80ee8f3b695e 455 */
EricLew 0:80ee8f3b695e 456
EricLew 0:80ee8f3b695e 457 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
EricLew 0:80ee8f3b695e 458