Revision 3:05a06b7c6e45, committed 2019-08-30

Comitter:

EndaKilgarriff

Date:

Fri Aug 30 09:32:20 2019 +0000

Parent:

2:bada41b6439b

Commit message:

Adjustments to README.txt file

Changed in this revision

diff -r bada41b6439b -r 05a06b7c6e45 README.txt
--- a/README.txt	Wed Aug 28 15:41:42 2019 +0000
+++ b/README.txt	Fri Aug 30 09:32:20 2019 +0000
@@ -2,14 +2,14 @@
 ------------------------------------ 
 EVAL-TempSense-ARDZ 
      Sensors:
-        ADT7410
-        ADT7420 
-        ADT7310 
-        ADT7320
+        ADT7410 (I2C)
+        ADT7420 (I2C)
+        ADT7310 (SPI)
+        ADT7320 (SPI)
 
 Overview
 --------
-These code files provide drivers to interface with TempSense family of devices 
+These code files provide drivers to interface with TempSense family of devices using both SPI and I2C
 listed above and communicate with EVAL-TempSense-ARDZ board. This code was developed and 
 tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. 
 
@@ -20,7 +20,7 @@
 
 Hardware Setup
 --------------
-Required: SDP-K1 (or alternative MBED enabled controller board), EVAL-TempSense-ARDZ (with remote sensors if desired), 
+Required: SDP-K1 ( or alternative MBED enabled controller board with Arduino form factor), EVAL-TempSense-ARDZ (with remote sensors if desired), 
 USB cable.
 Plug in the EVAL-TempSense-ARDZ board on SDP-K1 board (or any other Mbed enabled 
 controller board) using the SDP connector and screws.