File content as of revision 3:05a06b7c6e45:

Evaluation Boards/Products Supported
------------------------------------ 
EVAL-TempSense-ARDZ 
     Sensors:
        ADT7410 (I2C)
        ADT7420 (I2C)
        ADT7310 (SPI)
        ADT7320 (SPI)

Overview
--------
These code files provide drivers to interface with TempSense family of devices using both SPI and I2C
listed above and communicate with EVAL-TempSense-ARDZ board. This code was developed and 
tested on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. 

Product details: https://www.analog.com/en/products/adt7422.html#product-overview
Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-TempSense.html
User Guide for this code: https://wiki.analog.com/resources/tools-software/product-support-software/tempsense-mbed


Hardware Setup
--------------
Required: SDP-K1 ( or alternative MBED enabled controller board with Arduino form factor), EVAL-TempSense-ARDZ (with remote sensors if desired), 
USB cable.
Plug in the EVAL-TempSense-ARDZ board on SDP-K1 board (or any other Mbed enabled 
controller board) using the SDP connector and screws.
Connect SDP-K1 board to the PC using the USB cable.


How to Get Started
------------------
Open Mbed online compiler. https://ide.mbed.com/compiler
Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD568x-AD569x/
instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed 
instructions here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
Open CoolTerm (or alternative), select 115200 baud rate, and the applicable COM 
port to see the list of options. See User Guide for further details.


Notes
-----
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.


License
-------
Copyright (c) 2019 Analog Devices, Inc.  All rights reserved.
 
Redistribution and use in source and binary forms, with or without modification, 
are permitted provided that the following conditions are met:
  - Redistributions of source code must retain the above copyright notice, 
  this list of conditions and the following disclaimer.
  - Redistributions in binary form must reproduce the above copyright notice, 
  this list of conditions and the following disclaimer in the documentation 
  and/or other materials provided with the distribution.  
  - Modified versions of the software must be conspicuously marked as such.
  - This software is licensed solely and exclusively for use with processors/products 
  manufactured by or for Analog Devices, Inc.
  - This software may not be combined or merged with other code in any manner 
  that would cause the software to become subject to terms and conditions which 
  differ from those listed here.
  - Neither the name of Analog Devices, Inc. nor the names of its contributors 
  may be used to endorse or promote products derived from this software without 
  specific prior written permission.
  - The use of this software may or may not infringe the patent rights of one or 
  more patent holders.  This license does not release you from the requirement 
  that you obtain separate licenses from these patent holders to use this software.
 
THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND 
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, 
TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 
NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES 
(INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL 
PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
2019-01-10-7CBSD SLA