File content as of revision 1:e84d8d51cd51:

Evaluation Boards/Products Supported
------------------------------------ 
EVAL-AD5592R-1SDZ (AD5592R-1)
EVAL-AD5593R-SDZ (AD5593R)


Overview
--------
These code files provide drivers to interface with AD5592R/93R and communicate with 
EVAL-AD5592R-1SDZ and EVAL-AD5593R-SDZ boards. This code was developed and tested 
on SDP-K1 controller board https://os.mbed.com/platforms/SDP_K1/. 

Program wiki: https://wiki.analog.com/resources/tools-software/product-support-software/ad5592r_mbed_example

Product details: https://www.analog.com/en/products/ad5592r.html
                 https://www.analog.com/en/products/ad5593r.html   
                 
Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD5592R.html
                    https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/Eval-ad5593r.html

Hardware Setup
--------------
Required: SDP-K1, EVAL-AD5592R-1SDZ or EVAL-AD5593R, USB cable
Plug in the EVAL-AD5592R/93R board on SDP-K1 board (or any other Mbed enabled 
controller board) using the SDP connector and screws.
Connect SDP-K1 board to the PC using the USB cable.


How to Get Started
------------------
Open Mbed online compiler. https://ide.mbed.com/compiler
Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD5592R/
instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html
Select to compile for AD5592R or AD5593R in app_config.h.
Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions 
here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html
Open Tera Term (or alternative), select 115200 baud rate, and the applicable COM port to see the 
list of options. If the AD5592R/93R is not provided with an external voltage reference,
or the on-board voltage reference is not powered, enable the internal reference 
under [s] General Settings.

A detailed user guide on how to use SDP-K1 board on Mbed platform is available 
here: https://wiki.analog.com/resources/tools-software/mbed


Notes
-----
If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html
A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html.


License
-------
Copyright (c) 2020 Analog Devices, Inc.  All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
  - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.  
  - Modified versions of the software must be conspicuously marked as such.
  - This software is licensed solely and exclusively for use with processors/products manufactured by or for Analog Devices, Inc.
  - This software may not be combined or merged with other code in any manner that would cause the software to become subject to terms and conditions which differ from those listed here.
  - Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
  - The use of this software may or may not infringe the patent rights of one or more patent holders.  This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

2020-02-24-7CBSD SLA