Yutaka Yoshida / Mbed 2 deprecated BLE_WallbotBLE_Challenge_byYUTAKA3

6/22　上下往復完成版

Dependencies:   mbed

Fork of BLE_WallbotBLE_Challenge_byYUTAKA3 by Maiko Matsumoto

nRF51822/nRF51GattServer.cpp@0:76dfa9657d9d, 2014-11-12 (annotated)

Committer:
jksoft
Date:
Wed Nov 12 02:40:34 2014 +0000
Revision:
0:76dfa9657d9d
????????

Who changed what in which revision?

UserRevisionLine numberNew contents of line
jksoft 0:76dfa9657d9d 1 /* mbed Microcontroller Library
jksoft 0:76dfa9657d9d 2 * Copyright (c) 2006-2013 ARM Limited
jksoft 0:76dfa9657d9d 3 *
jksoft 0:76dfa9657d9d 4 * Licensed under the Apache License, Version 2.0 (the "License");
jksoft 0:76dfa9657d9d 5 * you may not use this file except in compliance with the License.
jksoft 0:76dfa9657d9d 6 * You may obtain a copy of the License at
jksoft 0:76dfa9657d9d 7 *
jksoft 0:76dfa9657d9d 8 * http://www.apache.org/licenses/LICENSE-2.0
jksoft 0:76dfa9657d9d 9 *
jksoft 0:76dfa9657d9d 10 * Unless required by applicable law or agreed to in writing, software
jksoft 0:76dfa9657d9d 11 * distributed under the License is distributed on an "AS IS" BASIS,
jksoft 0:76dfa9657d9d 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
jksoft 0:76dfa9657d9d 13 * See the License for the specific language governing permissions and
jksoft 0:76dfa9657d9d 14 * limitations under the License.
jksoft 0:76dfa9657d9d 15 */
jksoft 0:76dfa9657d9d 16
jksoft 0:76dfa9657d9d 17 #include "nRF51GattServer.h"
jksoft 0:76dfa9657d9d 18 #include "mbed.h"
jksoft 0:76dfa9657d9d 19
jksoft 0:76dfa9657d9d 20 #include "common/common.h"
jksoft 0:76dfa9657d9d 21 #include "btle/custom/custom_helper.h"
jksoft 0:76dfa9657d9d 22
jksoft 0:76dfa9657d9d 23 #include "nRF51Gap.h"
jksoft 0:76dfa9657d9d 24
jksoft 0:76dfa9657d9d 25 /**************************************************************************/
jksoft 0:76dfa9657d9d 26 /*!
jksoft 0:76dfa9657d9d 27 @brief Adds a new service to the GATT table on the peripheral
jksoft 0:76dfa9657d9d 28
jksoft 0:76dfa9657d9d 29 @returns ble_error_t
jksoft 0:76dfa9657d9d 30
jksoft 0:76dfa9657d9d 31 @retval BLE_ERROR_NONE
jksoft 0:76dfa9657d9d 32 Everything executed properly
jksoft 0:76dfa9657d9d 33
jksoft 0:76dfa9657d9d 34 @section EXAMPLE
jksoft 0:76dfa9657d9d 35
jksoft 0:76dfa9657d9d 36 @code
jksoft 0:76dfa9657d9d 37
jksoft 0:76dfa9657d9d 38 @endcode
jksoft 0:76dfa9657d9d 39 */
jksoft 0:76dfa9657d9d 40 /**************************************************************************/
jksoft 0:76dfa9657d9d 41 ble_error_t nRF51GattServer::addService(GattService &service)
jksoft 0:76dfa9657d9d 42 {
jksoft 0:76dfa9657d9d 43 /* ToDo: Make sure we don't overflow the array, etc. */
jksoft 0:76dfa9657d9d 44 /* ToDo: Make sure this service UUID doesn't already exist (?) */
jksoft 0:76dfa9657d9d 45 /* ToDo: Basic validation */
jksoft 0:76dfa9657d9d 46
jksoft 0:76dfa9657d9d 47 /* Add the service to the nRF51 */
jksoft 0:76dfa9657d9d 48 ble_uuid_t nordicUUID;
jksoft 0:76dfa9657d9d 49 nordicUUID = custom_convert_to_nordic_uuid(service.getUUID());
jksoft 0:76dfa9657d9d 50
jksoft 0:76dfa9657d9d 51 uint16_t serviceHandle;
jksoft 0:76dfa9657d9d 52 ASSERT( ERROR_NONE ==
jksoft 0:76dfa9657d9d 53 sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY,
jksoft 0:76dfa9657d9d 54 &nordicUUID,
jksoft 0:76dfa9657d9d 55 &serviceHandle),
jksoft 0:76dfa9657d9d 56 BLE_ERROR_PARAM_OUT_OF_RANGE );
jksoft 0:76dfa9657d9d 57 service.setHandle(serviceHandle);
jksoft 0:76dfa9657d9d 58
jksoft 0:76dfa9657d9d 59 /* Add characteristics to the service */
jksoft 0:76dfa9657d9d 60 for (uint8_t i = 0; i < service.getCharacteristicCount(); i++) {
jksoft 0:76dfa9657d9d 61 GattCharacteristic *p_char = service.getCharacteristic(i);
jksoft 0:76dfa9657d9d 62
jksoft 0:76dfa9657d9d 63 /* Skip any incompletely defined, read-only characteristics. */
jksoft 0:76dfa9657d9d 64 if ((p_char->getValueAttribute().getValuePtr() == NULL) &&
jksoft 0:76dfa9657d9d 65 (p_char->getValueAttribute().getInitialLength() == 0) &&
jksoft 0:76dfa9657d9d 66 (p_char->getProperties() == GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ)) {
jksoft 0:76dfa9657d9d 67 continue;
jksoft 0:76dfa9657d9d 68 }
jksoft 0:76dfa9657d9d 69
jksoft 0:76dfa9657d9d 70 nordicUUID = custom_convert_to_nordic_uuid(p_char->getValueAttribute().getUUID());
jksoft 0:76dfa9657d9d 71
jksoft 0:76dfa9657d9d 72 ASSERT ( ERROR_NONE ==
jksoft 0:76dfa9657d9d 73 custom_add_in_characteristic(BLE_GATT_HANDLE_INVALID,
jksoft 0:76dfa9657d9d 74 &nordicUUID,
jksoft 0:76dfa9657d9d 75 p_char->getProperties(),
jksoft 0:76dfa9657d9d 76 p_char->getValueAttribute().getValuePtr(),
jksoft 0:76dfa9657d9d 77 p_char->getValueAttribute().getInitialLength(),
jksoft 0:76dfa9657d9d 78 p_char->getValueAttribute().getMaxLength(),
jksoft 0:76dfa9657d9d 79 &nrfCharacteristicHandles[characteristicCount]),
jksoft 0:76dfa9657d9d 80 BLE_ERROR_PARAM_OUT_OF_RANGE );
jksoft 0:76dfa9657d9d 81
jksoft 0:76dfa9657d9d 82 /* Update the characteristic handle */
jksoft 0:76dfa9657d9d 83 uint16_t charHandle = characteristicCount;
jksoft 0:76dfa9657d9d 84 p_characteristics[characteristicCount++] = p_char;
jksoft 0:76dfa9657d9d 85
jksoft 0:76dfa9657d9d 86 p_char->getValueAttribute().setHandle(charHandle);
jksoft 0:76dfa9657d9d 87
jksoft 0:76dfa9657d9d 88 /* Add optional descriptors if any */
jksoft 0:76dfa9657d9d 89 /* ToDo: Make sure we don't overflow the array */
jksoft 0:76dfa9657d9d 90 for (uint8_t j = 0; j < p_char->getDescriptorCount(); j++) {
jksoft 0:76dfa9657d9d 91 GattAttribute *p_desc = p_char->getDescriptor(j);
jksoft 0:76dfa9657d9d 92
jksoft 0:76dfa9657d9d 93 nordicUUID = custom_convert_to_nordic_uuid(p_desc->getUUID());
jksoft 0:76dfa9657d9d 94
jksoft 0:76dfa9657d9d 95 ASSERT ( ERROR_NONE ==
jksoft 0:76dfa9657d9d 96 custom_add_in_descriptor(BLE_GATT_HANDLE_INVALID,
jksoft 0:76dfa9657d9d 97 &nordicUUID,
jksoft 0:76dfa9657d9d 98 p_desc->getValuePtr(),
jksoft 0:76dfa9657d9d 99 p_desc->getInitialLength(),
jksoft 0:76dfa9657d9d 100 p_desc->getMaxLength(),
jksoft 0:76dfa9657d9d 101 &nrfDescriptorHandles[descriptorCount]),
jksoft 0:76dfa9657d9d 102 BLE_ERROR_PARAM_OUT_OF_RANGE );
jksoft 0:76dfa9657d9d 103
jksoft 0:76dfa9657d9d 104 uint16_t descHandle = descriptorCount;
jksoft 0:76dfa9657d9d 105 p_descriptors[descriptorCount++] = p_desc;
jksoft 0:76dfa9657d9d 106 p_desc->setHandle(descHandle);
jksoft 0:76dfa9657d9d 107 }
jksoft 0:76dfa9657d9d 108 }
jksoft 0:76dfa9657d9d 109
jksoft 0:76dfa9657d9d 110 serviceCount++;
jksoft 0:76dfa9657d9d 111
jksoft 0:76dfa9657d9d 112 return BLE_ERROR_NONE;
jksoft 0:76dfa9657d9d 113 }
jksoft 0:76dfa9657d9d 114
jksoft 0:76dfa9657d9d 115 /**************************************************************************/
jksoft 0:76dfa9657d9d 116 /*!
jksoft 0:76dfa9657d9d 117 @brief Reads the value of a characteristic, based on the service
jksoft 0:76dfa9657d9d 118 and characteristic index fields
jksoft 0:76dfa9657d9d 119
jksoft 0:76dfa9657d9d 120 @param[in] charHandle
jksoft 0:76dfa9657d9d 121 The handle of the GattCharacteristic to read from
jksoft 0:76dfa9657d9d 122 @param[in] buffer
jksoft 0:76dfa9657d9d 123 Buffer to hold the the characteristic's value
jksoft 0:76dfa9657d9d 124 (raw byte array in LSB format)
jksoft 0:76dfa9657d9d 125 @param[in] len
jksoft 0:76dfa9657d9d 126 The number of bytes read into the buffer
jksoft 0:76dfa9657d9d 127
jksoft 0:76dfa9657d9d 128 @returns ble_error_t
jksoft 0:76dfa9657d9d 129
jksoft 0:76dfa9657d9d 130 @retval BLE_ERROR_NONE
jksoft 0:76dfa9657d9d 131 Everything executed properly
jksoft 0:76dfa9657d9d 132
jksoft 0:76dfa9657d9d 133 @section EXAMPLE
jksoft 0:76dfa9657d9d 134
jksoft 0:76dfa9657d9d 135 @code
jksoft 0:76dfa9657d9d 136
jksoft 0:76dfa9657d9d 137 @endcode
jksoft 0:76dfa9657d9d 138 */
jksoft 0:76dfa9657d9d 139 /**************************************************************************/
jksoft 0:76dfa9657d9d 140 ble_error_t nRF51GattServer::readValue(uint16_t charHandle, uint8_t buffer[], uint16_t *const lengthP)
jksoft 0:76dfa9657d9d 141 {
jksoft 0:76dfa9657d9d 142 ASSERT( ERROR_NONE ==
jksoft 0:76dfa9657d9d 143 sd_ble_gatts_value_get(nrfCharacteristicHandles[charHandle].value_handle, 0, lengthP, buffer),
jksoft 0:76dfa9657d9d 144 BLE_ERROR_PARAM_OUT_OF_RANGE);
jksoft 0:76dfa9657d9d 145
jksoft 0:76dfa9657d9d 146 return BLE_ERROR_NONE;
jksoft 0:76dfa9657d9d 147 }
jksoft 0:76dfa9657d9d 148
jksoft 0:76dfa9657d9d 149 /**************************************************************************/
jksoft 0:76dfa9657d9d 150 /*!
jksoft 0:76dfa9657d9d 151 @brief Updates the value of a characteristic, based on the service
jksoft 0:76dfa9657d9d 152 and characteristic index fields
jksoft 0:76dfa9657d9d 153
jksoft 0:76dfa9657d9d 154 @param[in] charHandle
jksoft 0:76dfa9657d9d 155 The handle of the GattCharacteristic to write to
jksoft 0:76dfa9657d9d 156 @param[in] buffer
jksoft 0:76dfa9657d9d 157 Data to use when updating the characteristic's value
jksoft 0:76dfa9657d9d 158 (raw byte array in LSB format)
jksoft 0:76dfa9657d9d 159 @param[in] len
jksoft 0:76dfa9657d9d 160 The number of bytes in buffer
jksoft 0:76dfa9657d9d 161
jksoft 0:76dfa9657d9d 162 @returns ble_error_t
jksoft 0:76dfa9657d9d 163
jksoft 0:76dfa9657d9d 164 @retval BLE_ERROR_NONE
jksoft 0:76dfa9657d9d 165 Everything executed properly
jksoft 0:76dfa9657d9d 166
jksoft 0:76dfa9657d9d 167 @section EXAMPLE
jksoft 0:76dfa9657d9d 168
jksoft 0:76dfa9657d9d 169 @code
jksoft 0:76dfa9657d9d 170
jksoft 0:76dfa9657d9d 171 @endcode
jksoft 0:76dfa9657d9d 172 */
jksoft 0:76dfa9657d9d 173 /**************************************************************************/
jksoft 0:76dfa9657d9d 174 ble_error_t nRF51GattServer::updateValue(uint16_t charHandle, uint8_t buffer[], uint16_t len, bool localOnly)
jksoft 0:76dfa9657d9d 175 {
jksoft 0:76dfa9657d9d 176 uint16_t gapConnectionHandle = nRF51Gap::getInstance().getConnectionHandle();
jksoft 0:76dfa9657d9d 177
jksoft 0:76dfa9657d9d 178 if (localOnly) {
jksoft 0:76dfa9657d9d 179 /* Only update locally regardless of notify/indicate */
jksoft 0:76dfa9657d9d 180 ASSERT_INT( ERROR_NONE,
jksoft 0:76dfa9657d9d 181 sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer),
jksoft 0:76dfa9657d9d 182 BLE_ERROR_PARAM_OUT_OF_RANGE );
jksoft 0:76dfa9657d9d 183 return BLE_ERROR_NONE;
jksoft 0:76dfa9657d9d 184 }
jksoft 0:76dfa9657d9d 185
jksoft 0:76dfa9657d9d 186 if ((p_characteristics[charHandle]->getProperties() &
jksoft 0:76dfa9657d9d 187 (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE |
jksoft 0:76dfa9657d9d 188 GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
jksoft 0:76dfa9657d9d 189 (gapConnectionHandle != BLE_CONN_HANDLE_INVALID)) {
jksoft 0:76dfa9657d9d 190 /* HVX update for the characteristic value */
jksoft 0:76dfa9657d9d 191 ble_gatts_hvx_params_t hvx_params;
jksoft 0:76dfa9657d9d 192
jksoft 0:76dfa9657d9d 193 hvx_params.handle = nrfCharacteristicHandles[charHandle].value_handle;
jksoft 0:76dfa9657d9d 194 hvx_params.type =
jksoft 0:76dfa9657d9d 195 (p_characteristics[charHandle]->getProperties() &
jksoft 0:76dfa9657d9d 196 GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) ?
jksoft 0:76dfa9657d9d 197 BLE_GATT_HVX_NOTIFICATION : BLE_GATT_HVX_INDICATION;
jksoft 0:76dfa9657d9d 198 hvx_params.offset = 0;
jksoft 0:76dfa9657d9d 199 hvx_params.p_data = buffer;
jksoft 0:76dfa9657d9d 200 hvx_params.p_len = &len;
jksoft 0:76dfa9657d9d 201
jksoft 0:76dfa9657d9d 202 error_t error = (error_t) sd_ble_gatts_hvx(gapConnectionHandle, &hvx_params);
jksoft 0:76dfa9657d9d 203
jksoft 0:76dfa9657d9d 204 /* ERROR_INVALID_STATE, ERROR_BUSY, ERROR_GATTS_SYS_ATTR_MISSING and
jksoft 0:76dfa9657d9d 205 *ERROR_NO_TX_BUFFERS the ATT table has been updated. */
jksoft 0:76dfa9657d9d 206 if ((error != ERROR_NONE) && (error != ERROR_INVALID_STATE) &&
jksoft 0:76dfa9657d9d 207 (error != ERROR_BLE_NO_TX_BUFFERS) && (error != ERROR_BUSY) &&
jksoft 0:76dfa9657d9d 208 (error != ERROR_BLEGATTS_SYS_ATTR_MISSING)) {
jksoft 0:76dfa9657d9d 209 ASSERT_INT( ERROR_NONE,
jksoft 0:76dfa9657d9d 210 sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer),
jksoft 0:76dfa9657d9d 211 BLE_ERROR_PARAM_OUT_OF_RANGE );
jksoft 0:76dfa9657d9d 212 }
jksoft 0:76dfa9657d9d 213 } else {
jksoft 0:76dfa9657d9d 214 ASSERT_INT( ERROR_NONE,
jksoft 0:76dfa9657d9d 215 sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer),
jksoft 0:76dfa9657d9d 216 BLE_ERROR_PARAM_OUT_OF_RANGE );
jksoft 0:76dfa9657d9d 217 }
jksoft 0:76dfa9657d9d 218
jksoft 0:76dfa9657d9d 219 return BLE_ERROR_NONE;
jksoft 0:76dfa9657d9d 220 }
jksoft 0:76dfa9657d9d 221
jksoft 0:76dfa9657d9d 222 /**************************************************************************/
jksoft 0:76dfa9657d9d 223 /*!
jksoft 0:76dfa9657d9d 224 @brief Callback handler for events getting pushed up from the SD
jksoft 0:76dfa9657d9d 225 */
jksoft 0:76dfa9657d9d 226 /**************************************************************************/
jksoft 0:76dfa9657d9d 227 void nRF51GattServer::hwCallback(ble_evt_t *p_ble_evt)
jksoft 0:76dfa9657d9d 228 {
jksoft 0:76dfa9657d9d 229 uint16_t handle_value;
jksoft 0:76dfa9657d9d 230 GattServerEvents::gattEvent_t eventType;
jksoft 0:76dfa9657d9d 231 const ble_gatts_evt_t *gattsEventP = &p_ble_evt->evt.gatts_evt;
jksoft 0:76dfa9657d9d 232
jksoft 0:76dfa9657d9d 233 switch (p_ble_evt->header.evt_id) {
jksoft 0:76dfa9657d9d 234 case BLE_GATTS_EVT_WRITE:
jksoft 0:76dfa9657d9d 235 /* There are 2 use case here: Values being updated & CCCD (indicate/notify) enabled */
jksoft 0:76dfa9657d9d 236
jksoft 0:76dfa9657d9d 237 /* 1.) Handle CCCD changes */
jksoft 0:76dfa9657d9d 238 handle_value = gattsEventP->params.write.handle;
jksoft 0:76dfa9657d9d 239 for (uint8_t i = 0; i<characteristicCount; i++) {
jksoft 0:76dfa9657d9d 240 if ((p_characteristics[i]->getProperties() & (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
jksoft 0:76dfa9657d9d 241 (nrfCharacteristicHandles[i].cccd_handle == handle_value)) {
jksoft 0:76dfa9657d9d 242 uint16_t cccd_value =
jksoft 0:76dfa9657d9d 243 (gattsEventP->params.write.data[1] << 8) |
jksoft 0:76dfa9657d9d 244 gattsEventP->params.write.data[0]; /* Little Endian but M0 may be mis-aligned */
jksoft 0:76dfa9657d9d 245
jksoft 0:76dfa9657d9d 246 if (((p_characteristics[i]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE) && (cccd_value & BLE_GATT_HVX_INDICATION)) ||
jksoft 0:76dfa9657d9d 247 ((p_characteristics[i]->getProperties() & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) && (cccd_value & BLE_GATT_HVX_NOTIFICATION))) {
jksoft 0:76dfa9657d9d 248 eventType = GattServerEvents::GATT_EVENT_UPDATES_ENABLED;
jksoft 0:76dfa9657d9d 249 } else {
jksoft 0:76dfa9657d9d 250 eventType = GattServerEvents::GATT_EVENT_UPDATES_DISABLED;
jksoft 0:76dfa9657d9d 251 }
jksoft 0:76dfa9657d9d 252
jksoft 0:76dfa9657d9d 253 handleEvent(eventType, i);
jksoft 0:76dfa9657d9d 254 return;
jksoft 0:76dfa9657d9d 255 }
jksoft 0:76dfa9657d9d 256 }
jksoft 0:76dfa9657d9d 257
jksoft 0:76dfa9657d9d 258 /* 2.) Changes to the characteristic value will be handled with other events below */
jksoft 0:76dfa9657d9d 259 eventType = GattServerEvents::GATT_EVENT_DATA_WRITTEN;
jksoft 0:76dfa9657d9d 260 break;
jksoft 0:76dfa9657d9d 261
jksoft 0:76dfa9657d9d 262 case BLE_GATTS_EVT_HVC:
jksoft 0:76dfa9657d9d 263 /* Indication confirmation received */
jksoft 0:76dfa9657d9d 264 eventType = GattServerEvents::GATT_EVENT_CONFIRMATION_RECEIVED;
jksoft 0:76dfa9657d9d 265 handle_value = gattsEventP->params.hvc.handle;
jksoft 0:76dfa9657d9d 266 break;
jksoft 0:76dfa9657d9d 267
jksoft 0:76dfa9657d9d 268 case BLE_EVT_TX_COMPLETE: {
jksoft 0:76dfa9657d9d 269 handleDataSentEvent(p_ble_evt->evt.common_evt.params.tx_complete.count);
jksoft 0:76dfa9657d9d 270 return;
jksoft 0:76dfa9657d9d 271 }
jksoft 0:76dfa9657d9d 272
jksoft 0:76dfa9657d9d 273 case BLE_GATTS_EVT_SYS_ATTR_MISSING:
jksoft 0:76dfa9657d9d 274 sd_ble_gatts_sys_attr_set(gattsEventP->conn_handle, NULL, 0);
jksoft 0:76dfa9657d9d 275 return;
jksoft 0:76dfa9657d9d 276
jksoft 0:76dfa9657d9d 277 default:
jksoft 0:76dfa9657d9d 278 return;
jksoft 0:76dfa9657d9d 279 }
jksoft 0:76dfa9657d9d 280
jksoft 0:76dfa9657d9d 281 /* Find index (charHandle) in the pool */
jksoft 0:76dfa9657d9d 282 for (uint8_t i = 0; i<characteristicCount; i++) {
jksoft 0:76dfa9657d9d 283 if (nrfCharacteristicHandles[i].value_handle == handle_value) {
jksoft 0:76dfa9657d9d 284 switch (eventType) {
jksoft 0:76dfa9657d9d 285 case GattServerEvents::GATT_EVENT_DATA_WRITTEN: {
jksoft 0:76dfa9657d9d 286 GattCharacteristicWriteCBParams cbParams = {
jksoft 0:76dfa9657d9d 287 .charHandle = i,
jksoft 0:76dfa9657d9d 288 .op = static_cast<GattCharacteristicWriteCBParams::Type>(gattsEventP->params.write.op),
jksoft 0:76dfa9657d9d 289 .offset = gattsEventP->params.write.offset,
jksoft 0:76dfa9657d9d 290 .len = gattsEventP->params.write.len,
jksoft 0:76dfa9657d9d 291 .data = gattsEventP->params.write.data
jksoft 0:76dfa9657d9d 292 };
jksoft 0:76dfa9657d9d 293 handleDataWrittenEvent(&cbParams);
jksoft 0:76dfa9657d9d 294 break;
jksoft 0:76dfa9657d9d 295 }
jksoft 0:76dfa9657d9d 296 default:
jksoft 0:76dfa9657d9d 297 handleEvent(eventType, i);
jksoft 0:76dfa9657d9d 298 break;
jksoft 0:76dfa9657d9d 299 }
jksoft 0:76dfa9657d9d 300 }
jksoft 0:76dfa9657d9d 301 }
jksoft 0:76dfa9657d9d 302 }