version 1.6
Dependents: iot_water_monitor_v2
Diff: easy-connect.h
- Revision:
- 0:9fa9929d1a8c
diff -r 000000000000 -r 9fa9929d1a8c easy-connect.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/easy-connect.h Tue Dec 12 15:57:57 2017 +0000 @@ -0,0 +1,223 @@ +#ifndef __EASY_CONNECT_H__ +#define __EASY_CONNECT_H__ + +#include "mbed.h" + +#define ETHERNET 1 +#define WIFI_ESP8266 2 +#define MESH_LOWPAN_ND 3 +#define MESH_THREAD 4 +#define WIFI_ODIN 5 +#define WIFI_RTW 6 +#define CELLULAR_ONBOARD 7 +#define WIFI_IDW0XX1 8 + +#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266 +#include "ESP8266Interface.h" + +#ifdef MBED_CONF_APP_ESP8266_DEBUG +ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX, MBED_CONF_APP_ESP8266_DEBUG); +#else +ESP8266Interface wifi(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX); +#endif + +#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ODIN +#include "OdinWiFiInterface.h" + +OdinWiFiInterface wifi; +#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_RTW +#include "RTWInterface.h" +RTWInterface wifi; +#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_IDW0XX1 +#include "SpwfSAInterface.h" +SpwfSAInterface wifi(MBED_CONF_APP_WIFI_TX, MBED_CONF_APP_WIFI_RX); +#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET +#include "EthernetInterface.h" +EthernetInterface eth; +#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND +#define MESH +#include "NanostackInterface.h" +LoWPANNDInterface mesh; +#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD +#define MESH +#include "NanostackInterface.h" +ThreadInterface mesh; +#elif MBED_CONF_APP_NETWORK_INTERFACE == CELLULAR_ONBOARD +#include "OnboardCellularInterface.h" +OnboardCellularInterface cellular; +#else +#error "No connectivity method chosen. Please add 'config.network-interfaces.value' to your mbed_app.json (see README.md for more information)." +#endif + +#if defined(MESH) + +// Define macros for radio type +#define ATMEL 1 +#define MCR20 2 +#define SPIRIT1 3 +#define EFR32 4 + +#if MBED_CONF_APP_MESH_RADIO_TYPE == ATMEL +#include "NanostackRfPhyAtmel.h" +NanostackRfPhyAtmel rf_phy(ATMEL_SPI_MOSI, ATMEL_SPI_MISO, ATMEL_SPI_SCLK, ATMEL_SPI_CS, + ATMEL_SPI_RST, ATMEL_SPI_SLP, ATMEL_SPI_IRQ, ATMEL_I2C_SDA, ATMEL_I2C_SCL); +#elif MBED_CONF_APP_MESH_RADIO_TYPE == MCR20 +#include "NanostackRfPhyMcr20a.h" +NanostackRfPhyMcr20a rf_phy(MCR20A_SPI_MOSI, MCR20A_SPI_MISO, MCR20A_SPI_SCLK, MCR20A_SPI_CS, MCR20A_SPI_RST, MCR20A_SPI_IRQ); +#elif MBED_CONF_APP_MESH_RADIO_TYPE == SPIRIT1 +#include "NanostackRfPhySpirit1.h" +NanostackRfPhySpirit1 rf_phy(SPIRIT1_SPI_MOSI, SPIRIT1_SPI_MISO, SPIRIT1_SPI_SCLK, + SPIRIT1_DEV_IRQ, SPIRIT1_DEV_CS, SPIRIT1_DEV_SDN, SPIRIT1_BRD_LED); +#elif MBED_CONF_APP_MESH_RADIO_TYPE == EFR32 +#include "NanostackRfPhyEfr32.h" +NanostackRfPhyEfr32 rf_phy; +#endif //MBED_CONF_APP_RADIO_TYPE +#endif //MESH + +#ifndef MESH +// This is address to mbed Device Connector +#define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684" +#else +// This is address to mbed Device Connector +#define MBED_SERVER_ADDRESS "coaps://[2607:f0d0:2601:52::20]:5684" +#endif + +#ifdef MBED_CONF_APP_ESP8266_SSID +#define MBED_CONF_APP_WIFI_SSID MBED_CONF_APP_ESP8266_SSID +#endif + +#ifdef MBED_CONF_APP_ESP8266_PASSWORD +#define MBED_CONF_APP_WIFI_PASSWORD MBED_CONF_APP_ESP8266_PASSWORD +#endif + +/* \brief print_MAC - print_MAC - helper function to print out MAC address + * in: network_interface - pointer to network i/f + * bool log-messages print out logs or not + * MAC address is print, if it can be acquired & log_messages is true. + * + */ +void print_MAC(NetworkInterface* network_interface, bool log_messages) { +#if MBED_CONF_APP_NETWORK_INTERFACE != CELLULAR_ONBOARD + const char *mac_addr = network_interface->get_mac_address(); + if (mac_addr == NULL) { + if (log_messages) { + printf("[EasyConnect] ERROR - No MAC address\n"); + } + return; + } + if (log_messages) { + printf("[EasyConnect] MAC address %s\n", mac_addr); + } +#endif +} + + +/* \brief easy_connect - easy_connect function to connect the pre-defined network bearer, + * config done via mbed_app.json (see README.md for details). + * IN: bool log_messages print out diagnostics or not. + * + */ +NetworkInterface* easy_connect(bool log_messages = false) { + NetworkInterface* network_interface = 0; + int connect_success = -1; + /// This should be removed once mbedOS supports proper dual-stack +#if defined (MESH) || (MBED_CONF_LWIP_IPV6_ENABLED==true) + printf("[EasyConnect] IPv6 mode\n"); +#else + printf("[EasyConnect] IPv4 mode\n"); +#endif + +#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266 + if (log_messages) { + printf("[EasyConnect] Using WiFi (ESP8266) \n"); + printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); + } + network_interface = &wifi; + connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); +#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ODIN + if (log_messages) { + printf("[EasyConnect] Using WiFi (ODIN) \n"); + printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); + } + network_interface = &wifi; + connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); +#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_RTW + if (log_messages) { + printf("[EasyConnect] Using WiFi (RTW)\n"); + printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); + } + network_interface = &wifi; + connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); +#elif MBED_CONF_APP_NETWORK_INTERFACE == WIFI_IDW0XX1 + if (log_messages) { + printf("[EasyConnect] Using WiFi (X-NUCLEO-IDW0XX1)\n"); + printf("[EasyConnect] Connecting to WiFi %s\n", MBED_CONF_APP_WIFI_SSID); + } + network_interface = &wifi; + connect_success = wifi.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD, NSAPI_SECURITY_WPA_WPA2); +#elif MBED_CONF_APP_NETWORK_INTERFACE == CELLULAR_ONBOARD +# ifdef MBED_CONF_APP_CELLULAR_SIM_PIN + cellular.set_sim_pin(MBED_CONF_APP_CELLULAR_SIM_PIN); +# endif +# ifdef MBED_CONF_APP_CELLULAR_APN +# ifndef MBED_CONF_APP_CELLULAR_USERNAME +# define MBED_CONF_APP_CELLULAR_USERNAME 0 +# endif +# ifndef MBED_CONF_APP_CELLULAR_PASSWORD +# define MBED_CONF_APP_CELLULAR_PASSWORD 0 +# endif + cellular.set_credentials(MBED_CONF_APP_CELLULAR_APN, MBED_CONF_APP_CELLULAR_USERNAME, MBED_CONF_APP_CELLULAR_PASSWORD); + if (log_messages) { + printf("[EasyConnect] Connecting using Cellular interface and APN %s\n", MBED_CONF_APP_CELLULAR_APN); + } +# else + if (log_messages) { + printf("[EasyConnect] Connecting using Cellular interface and default APN\n"); + } +# endif + connect_success = cellular.connect(); + network_interface = &cellular; +#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET + if (log_messages) { + printf("[EasyConnect] Using Ethernet\n"); + } + network_interface = ð + connect_success = eth.connect(); +#endif + +#ifdef MESH + if (log_messages) { + printf("[EasyConnect] Using Mesh\n"); + printf("[EasyConnect] Connecting to Mesh..\n"); + } + network_interface = &mesh; + mesh.initialize(&rf_phy); + connect_success = mesh.connect(); +#endif + if(connect_success == 0) { + if (log_messages) { + printf("[EasyConnect] Connected to Network successfully\n"); + print_MAC(network_interface, log_messages); + } + } else { + if (log_messages) { + print_MAC(network_interface, log_messages); + printf("[EasyConnect] Connection to Network Failed %d!\n", connect_success); + } + return NULL; + } + const char *ip_addr = network_interface->get_ip_address(); + if (ip_addr == NULL) { + if (log_messages) { + printf("[EasyConnect] ERROR - No IP address\n"); + } + return NULL; + } + + if (log_messages) { + printf("[EasyConnect] IP address %s\n", ip_addr); + } + return network_interface; +} + +#endif // __EASY_CONNECT_H__