my customized lib

Revision:
0:8094b249013c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/easy-connect.h	Sun Nov 26 15:08:14 2017 +0000
@@ -0,0 +1,102 @@
+#ifndef __MAGIC_CONNECT_H__
+#define __MAGIC_CONNECT_H__
+
+#include "mbed.h"
+
+Serial output(USBTX, USBRX);
+
+#define ETHERNET        1
+#define WIFI_ESP8266    2
+#define MESH_LOWPAN_ND  3
+#define MESH_THREAD     4
+
+#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266
+#include "ESP8266Interface.h"
+
+#ifdef MBED_CONF_APP_ESP8266_DEBUG
+ESP8266Interface esp(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX, MBED_CONF_APP_ESP8266_DEBUG);
+#else
+ESP8266Interface esp(MBED_CONF_APP_ESP8266_TX, MBED_CONF_APP_ESP8266_RX);
+#endif
+
+#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
+#include "EthernetInterface.h"
+EthernetInterface eth;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND
+#define MESH
+#include "NanostackInterface.h"
+LoWPANNDInterface mesh;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD
+#define MESH
+#include "NanostackInterface.h"
+ThreadInterface mesh;
+#else
+#error "No connectivity method chosen. Please add 'config.network-interfaces.value' to your mbed_app.json (see README.md for more information)."
+#endif
+
+#if defined(MESH)
+#if MBED_CONF_APP_MESH_RADIO_TYPE == ATMEL
+#include "NanostackRfPhyAtmel.h"
+NanostackRfPhyAtmel rf_phy(ATMEL_SPI_MOSI, ATMEL_SPI_MISO, ATMEL_SPI_SCLK, ATMEL_SPI_CS,
+                           ATMEL_SPI_RST, ATMEL_SPI_SLP, ATMEL_SPI_IRQ, ATMEL_I2C_SDA, ATMEL_I2C_SCL);
+#elif MBED_CONF_APP_MESH_RADIO_TYPE == MCR20
+#include "NanostackRfPhyMcr20a.h"
+NanostackRfPhyMcr20a rf_phy(MCR20A_SPI_MOSI, MCR20A_SPI_MISO, MCR20A_SPI_SCLK, MCR20A_SPI_CS, MCR20A_SPI_RST, MCR20A_SPI_IRQ);
+#endif //MBED_CONF_APP_RADIO_TYPE
+#endif //MESH
+
+#ifndef MESH
+// This is address to mbed Device Connector
+#define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684"
+#else
+// This is address to mbed Device Connector
+#define MBED_SERVER_ADDRESS "coaps://[2607:f0d0:2601:52::20]:5684"
+#endif
+
+NetworkInterface* easy_connect(bool log_messages = false) {
+    NetworkInterface* network_interface = 0;
+    int connect_success = -1;
+#if MBED_CONF_APP_NETWORK_INTERFACE == WIFI_ESP8266
+    if (log_messages) {
+        output.printf("[EasyConnect] Using WiFi (ESP8266) \r\n");
+        output.printf("[EasyConnect] Connecting to WiFi..\r\n");
+    }
+    connect_success = esp.connect(MBED_CONF_APP_ESP8266_SSID, MBED_CONF_APP_ESP8266_PASSWORD);
+    network_interface = &esp;
+#elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET
+    if (log_messages) {
+        output.printf("[EasyConnect] Using Ethernet\r\n");
+    }
+    connect_success = eth.connect();
+    network_interface = ð
+#endif
+#ifdef MESH
+    if (log_messages) {
+        output.printf("[EasyConnect] Using Mesh\r\n");
+        output.printf("[EasyConnect] Connecting to Mesh..\r\n");
+    }
+    connect_success = mesh.connect();
+    network_interface = &mesh;
+#endif
+    if(connect_success == 0) {
+        if (log_messages) {
+            output.printf("[EasyConnect] Connected to Network successfully\r\n");
+        }
+    } else {
+        if (log_messages) {
+            output.printf("[EasyConnect] Connection to Network Failed %d!\r\n", connect_success);
+        }
+        return NULL;
+    }
+    if (log_messages) {
+        const char *ip_addr = network_interface->get_ip_address();
+        if (ip_addr) {
+            output.printf("[EasyConnect] IP address %s\r\n", ip_addr);
+        } else {
+            output.printf("[EasyConnect] No IP address\r\n");
+        }
+    }
+    return network_interface;
+}
+
+#endif // __MAGIC_CONNECT_H__