Steffen Arntz / TFTLCD

This is a port of Henning Kralsen's UTFT library for Arduino/chipKIT to mbed, refactored to make full use of C inheritance and access control, in order to reduce work when implementing new drivers and at the same time make the code more readable and easier to maintain. As of now supported are SSD1289 (16-bit interface), HX8340-B (serial interface) and ST7735 (serial interface). Drivers for other controllers will be added as time and resources to acquire the displays to test the code permit.

Dependents:   UTFT_SSD1289

Fork of TFTLCD by Todor Todorov

ssd1289.h@12:d0978272a340, 2012-12-11 (annotated)

Committer:
ttodorov
Date:
Tue Dec 11 18:11:14 2012 +0000
Revision:
12:d0978272a340
Parent:
10:69571adcfad5
Child:
20:4bdca8d8dadc
- integrated RGB16 and RGB18 color depth configuration/selection; - integrated HW rotation for the HX8340-B driver; - changed the bitmap drawing API; - TODO: no drawing of rotated or scaled bitmaps yet

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ttodorov 4:3ac4239f6c9c 1 /** \file ssd1289.h
ttodorov 0:881ff0b71102 2 * \brief mbed TFT LCD controller for displays with the SSD1289 IC.
ttodorov 0:881ff0b71102 3 * \copyright GNU Public License, v2. or later
ttodorov 0:881ff0b71102 4 *
ttodorov 0:881ff0b71102 5 * A known display with this type of controller chip is the ITDB02-3.2S
ttodorov 0:881ff0b71102 6 * from http://imall.iteadstudio.com
ttodorov 0:881ff0b71102 7 *
ttodorov 0:881ff0b71102 8 * This library is based on the Arduino/chipKIT UTFT library by Henning
ttodorov 0:881ff0b71102 9 * Karlsen, http://henningkarlsen.com/electronics/library.php?id=52
ttodorov 0:881ff0b71102 10 *
ttodorov 0:881ff0b71102 11 * Copyright (C)2010-2012 Henning Karlsen. All right reserved.
ttodorov 5:09b6d228ceea 12 *
ttodorov 0:881ff0b71102 13 * Copyright (C)2012 Todor Todorov.
ttodorov 0:881ff0b71102 14 *
ttodorov 0:881ff0b71102 15 * This library is free software; you can redistribute it and/or
ttodorov 0:881ff0b71102 16 * modify it under the terms of the GNU Lesser General Public
ttodorov 0:881ff0b71102 17 * License as published by the Free Software Foundation; either
ttodorov 0:881ff0b71102 18 * version 2.1 of the License, or (at your option) any later version.
ttodorov 0:881ff0b71102 19 *
ttodorov 0:881ff0b71102 20 * This library is distributed in the hope that it will be useful,
ttodorov 0:881ff0b71102 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
ttodorov 0:881ff0b71102 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
ttodorov 0:881ff0b71102 23 * Lesser General Public License for more details.
ttodorov 0:881ff0b71102 24 *
ttodorov 0:881ff0b71102 25 * You should have received a copy of the GNU Lesser General Public
ttodorov 0:881ff0b71102 26 * License along with this library; if not, write to:
ttodorov 0:881ff0b71102 27 *
ttodorov 0:881ff0b71102 28 * Free Software Foundation, Inc.
ttodorov 0:881ff0b71102 29 * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
ttodorov 0:881ff0b71102 30 *
ttodorov 0:881ff0b71102 31 *********************************************************************/
ttodorov 3:64a5b67d5b51 32 #ifndef TFTLCD_SSD1289_H
ttodorov 3:64a5b67d5b51 33 #define TFTLCD_SSD1289_H
ttodorov 0:881ff0b71102 34
ttodorov 0:881ff0b71102 35 #include "lcd_base.h"
ttodorov 0:881ff0b71102 36
ttodorov 6:059ca1648211 37 #ifdef __cplusplus
ttodorov 6:059ca1648211 38 extern "C" {
ttodorov 6:059ca1648211 39 #endif
ttodorov 6:059ca1648211 40
ttodorov 3:64a5b67d5b51 41 /** Represents a LCD instance.
ttodorov 3:64a5b67d5b51 42 *
ttodorov 3:64a5b67d5b51 43 * This is the utility class, through which the display can be manipulated
ttodorov 3:64a5b67d5b51 44 * and graphics objects can be shown to the user. A known display, which
ttodorov 3:64a5b67d5b51 45 * works with this library is the ITDB02-3.2S from iTeadStudio - a RGB TFT
ttodorov 3:64a5b67d5b51 46 * with 240x320 pixels resolution and 65K colors, using 16-bit interface.
ttodorov 3:64a5b67d5b51 47 *
ttodorov 4:3ac4239f6c9c 48 * The display needs 20 to 22 pins to work with mbed, so it is possibly not
ttodorov 3:64a5b67d5b51 49 * the best of choices out there, but other than that it uses +3.3V for
ttodorov 3:64a5b67d5b51 50 * power and logic, as well as the backlight, thus can be interfaced directly
ttodorov 3:64a5b67d5b51 51 * to the mbed without the need of shields or level shifters as with Arduino.
ttodorov 3:64a5b67d5b51 52 *
ttodorov 3:64a5b67d5b51 53 * How to use:
ttodorov 3:64a5b67d5b51 54 * \code
ttodorov 3:64a5b67d5b51 55 * // include the library, this will also pull in the header for the provided fonts
ttodorov 3:64a5b67d5b51 56 * #include "ssd1289.h"
ttodorov 3:64a5b67d5b51 57 *
ttodorov 3:64a5b67d5b51 58 * // prepare the data bus for writing commands and pixel data
ttodorov 3:64a5b67d5b51 59 * BusOut dataBus( p30, p29, p28, p27, p26, p25, p24, p23, p22, p21, p20, p19, p18, p17, p16, p15 ); // 16 pins
ttodorov 3:64a5b67d5b51 60 * // create the lcd instance
ttodorov 4:3ac4239f6c9c 61 * SSD1289_LCD lcd( p14, p13, p12, p11, &dataBus ); // control pins and data bus
ttodorov 3:64a5b67d5b51 62 *
ttodorov 3:64a5b67d5b51 63 * int main()
ttodorov 3:64a5b67d5b51 64 * {
ttodorov 3:64a5b67d5b51 65 * // initialize display - place it in standard portrait mode and set background to black and
ttodorov 3:64a5b67d5b51 66 * // foreground to white color.
ttodorov 3:64a5b67d5b51 67 * lcd.Initialize();
ttodorov 3:64a5b67d5b51 68 * // set current font to the smallest 8x12 pixels font.
ttodorov 3:64a5b67d5b51 69 * lcd.SetFont( Font8x12 );
ttodorov 3:64a5b67d5b51 70 * // print something on the screen
ttodorov 3:64a5b67d5b51 71 * lcd.Print( "Hello, World!", CENTER, 25 ); // align text to center horizontally and use starndard colors
ttodorov 3:64a5b67d5b51 72 *
ttodorov 3:64a5b67d5b51 73 * while ( 1 ) { }
ttodorov 3:64a5b67d5b51 74 * }
ttodorov 3:64a5b67d5b51 75 *
ttodorov 3:64a5b67d5b51 76 * \endcode
ttodorov 3:64a5b67d5b51 77 * \version 0.1
ttodorov 3:64a5b67d5b51 78 * \author Todor Todorov
ttodorov 3:64a5b67d5b51 79 */
ttodorov 4:3ac4239f6c9c 80 class SSD1289_LCD : public LCD
ttodorov 0:881ff0b71102 81 {
ttodorov 0:881ff0b71102 82 public:
ttodorov 0:881ff0b71102 83 /** Creates a new instance of the class.
ttodorov 0:881ff0b71102 84 *
ttodorov 0:881ff0b71102 85 * \param CS Pin for the ChipSelect signal.
ttodorov 0:881ff0b71102 86 * \param RESET Pin for the RESET line.
ttodorov 0:881ff0b71102 87 * \param RS Pin for the RS signal.
ttodorov 0:881ff0b71102 88 * \param WR Pin for the WR signal.
ttodorov 0:881ff0b71102 89 * \param DATA_PORT Address of the data bus for transfer of commands and pixel data.
ttodorov 4:3ac4239f6c9c 90 * \param BL Pin for controlling the backlight. By default not used.
ttodorov 0:881ff0b71102 91 * \param RD Pin for the RD signal. This line is not needed by the driver, so if you would like to
ttodorov 0:881ff0b71102 92 * use the pin on the mbed for something else, just pull-up the respective pin on the LCD high,
ttodorov 0:881ff0b71102 93 * and do not assign a value to this parameter when creating the controller instance.
ttodorov 0:881ff0b71102 94 */
ttodorov 4:3ac4239f6c9c 95 SSD1289_LCD( PinName CS, PinName RESET, PinName RS, PinName WR, BusOut* DATA_PORT, PinName BL = NC, PinName RD = NC );
ttodorov 0:881ff0b71102 96
ttodorov 0:881ff0b71102 97 /** Initialize display.
ttodorov 0:881ff0b71102 98 *
ttodorov 0:881ff0b71102 99 * Wakes up the display from sleep, initializes power parameters.
ttodorov 0:881ff0b71102 100 * This function must be called first, befor any painting on the
ttodorov 0:881ff0b71102 101 * display is done, otherwise the positioning of graphical elements
ttodorov 0:881ff0b71102 102 * will not work properly and any paynt operation will not be visible
ttodorov 0:881ff0b71102 103 * or produce garbage.
ttodorov 0:881ff0b71102 104 *
ttodorov 0:881ff0b71102 105 * \param oritentation The display orientation, landscape is default.
ttodorov 12:d0978272a340 106 * \param colors The correct color depth to use for the pixel data. Value is disregarded.
ttodorov 0:881ff0b71102 107 */
ttodorov 12:d0978272a340 108 virtual void Initialize( orientation_t orientation = LANDSCAPE, colordepth_t colors = RGB16 );
ttodorov 0:881ff0b71102 109
ttodorov 4:3ac4239f6c9c 110 /** Puts the display to sleep.
ttodorov 4:3ac4239f6c9c 111 *
ttodorov 4:3ac4239f6c9c 112 * When the display is in sleep mode, its power consumption is
ttodorov 4:3ac4239f6c9c 113 * minimized. Before new pixel data can be written to the display
ttodorov 4:3ac4239f6c9c 114 * memory, the controller needs to be brought out of sleep mode.
ttodorov 4:3ac4239f6c9c 115 * \sa #WakeUp( void );
ttodorov 4:3ac4239f6c9c 116 * \remarks The result of this operation might not be exactly as
ttodorov 4:3ac4239f6c9c 117 * expected. Putting the display to sleep will cause the
ttodorov 4:3ac4239f6c9c 118 * controller to switch to the standard color of the LCD,
ttodorov 4:3ac4239f6c9c 119 * so depending on whether the display is normally white,
ttodorov 4:3ac4239f6c9c 120 * or normally dark, the screen might or might not go
ttodorov 4:3ac4239f6c9c 121 * dark. Additional power saving can be achieved, if
ttodorov 4:3ac4239f6c9c 122 * the backlight of the used display is not hardwired on
ttodorov 4:3ac4239f6c9c 123 * the PCB and can be controlled via the BL pin.
ttodorov 4:3ac4239f6c9c 124 */
ttodorov 4:3ac4239f6c9c 125 virtual void Sleep( void );
ttodorov 4:3ac4239f6c9c 126
ttodorov 4:3ac4239f6c9c 127 /** Wakes up the display from sleep mode.
ttodorov 4:3ac4239f6c9c 128 *
ttodorov 4:3ac4239f6c9c 129 * This function needs to be called before any other, when the
ttodorov 4:3ac4239f6c9c 130 * display has been put into sleep mode by a previois call to
ttodorov 4:3ac4239f6c9c 131 * #Sleep( void ).
ttodorov 4:3ac4239f6c9c 132 */
ttodorov 4:3ac4239f6c9c 133 virtual void WakeUp( void );
ttodorov 4:3ac4239f6c9c 134
ttodorov 0:881ff0b71102 135 protected:
ttodorov 4:3ac4239f6c9c 136 /** Sends a command to the display.
ttodorov 4:3ac4239f6c9c 137 *
ttodorov 4:3ac4239f6c9c 138 * \param cmd The display command.
ttodorov 4:3ac4239f6c9c 139 * \remarks Commands are controller-specific and this function needs to
ttodorov 4:3ac4239f6c9c 140 * be implemented separately for each available controller.
ttodorov 4:3ac4239f6c9c 141 */
ttodorov 2:81ed304b7e9b 142 virtual void WriteCmd( unsigned short cmd );
ttodorov 4:3ac4239f6c9c 143
ttodorov 4:3ac4239f6c9c 144 /** Sends pixel data to the display.
ttodorov 4:3ac4239f6c9c 145 *
ttodorov 4:3ac4239f6c9c 146 * \param data The display data.
ttodorov 4:3ac4239f6c9c 147 * \remarks Sendin data is controller-specific and this function needs to
ttodorov 4:3ac4239f6c9c 148 * be implemented separately for each available controller.
ttodorov 4:3ac4239f6c9c 149 */
ttodorov 2:81ed304b7e9b 150 virtual void WriteData( unsigned short data );
ttodorov 4:3ac4239f6c9c 151
ttodorov 4:3ac4239f6c9c 152 /** Assigns a chunk of the display memory to receive data.
ttodorov 4:3ac4239f6c9c 153 *
ttodorov 4:3ac4239f6c9c 154 * When data is sent to the display after this function completes, the opertion will
ttodorov 4:3ac4239f6c9c 155 * start from the begining of the assigned address (pixel position) and the pointer
ttodorov 4:3ac4239f6c9c 156 * will be automatically incremented so that the next data write operation will continue
ttodorov 4:3ac4239f6c9c 157 * with the next pixel from the memory block. If more data is written than available
ttodorov 4:3ac4239f6c9c 158 * pixels, at the end of the block the pointer will jump back to its beginning and
ttodorov 4:3ac4239f6c9c 159 * commence again, until the next address change command is sent to the display.
ttodorov 4:3ac4239f6c9c 160 *
ttodorov 4:3ac4239f6c9c 161 * \param x1 The X coordinate of the pixel at the beginning of the block.
ttodorov 4:3ac4239f6c9c 162 * \param y1 The Y coordinate of the pixel at the beginning of the block.
ttodorov 4:3ac4239f6c9c 163 * \param x2 The X coordinate of the pixel at the end of the block.
ttodorov 4:3ac4239f6c9c 164 * \param y2 The Y coordinate of the pixel at the end of the block.
ttodorov 4:3ac4239f6c9c 165 * \remarks Addressing commands are controller-specific and this function needs to be
ttodorov 4:3ac4239f6c9c 166 * implemented separately for each available controller.
ttodorov 4:3ac4239f6c9c 167 */
ttodorov 2:81ed304b7e9b 168 virtual void SetXY( uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2 );
ttodorov 0:881ff0b71102 169
ttodorov 10:69571adcfad5 170 /** Sets the color of the pixel at the address pointer of the controller.
ttodorov 10:69571adcfad5 171 *
ttodorov 10:69571adcfad5 172 * This function is to be provided by each implementation separately in
ttodorov 10:69571adcfad5 173 * order to account for different color depth used by the controller.
ttodorov 10:69571adcfad5 174 * \param color The color of the pixel.
ttodorov 10:69571adcfad5 175 */
ttodorov 12:d0978272a340 176 virtual void SetPixelColor( unsigned int color );
ttodorov 10:69571adcfad5 177
ttodorov 0:881ff0b71102 178 private:
ttodorov 4:3ac4239f6c9c 179 DigitalOut _lcd_pin_wr;
ttodorov 4:3ac4239f6c9c 180 BusOut* _lcd_port;
ttodorov 4:3ac4239f6c9c 181 DigitalOut* _lcd_pin_bl;
ttodorov 0:881ff0b71102 182 DigitalOut* _lcd_pin_rd;
ttodorov 0:881ff0b71102 183 };
ttodorov 0:881ff0b71102 184
ttodorov 6:059ca1648211 185 #ifdef __cplusplus
ttodorov 6:059ca1648211 186 }
ttodorov 6:059ca1648211 187 #endif
ttodorov 6:059ca1648211 188
ttodorov 3:64a5b67d5b51 189 #endif /* TFTLCD_SSD1289_H */