Diff: main.cpp

Revision:

4:a37c4436b6eb

Parent:

3:e7cab3f9facb

diff -r e7cab3f9facb -r a37c4436b6eb main.cpp
--- a/main.cpp	Mon Nov 04 00:31:15 2019 +0000
+++ b/main.cpp	Mon Nov 04 13:44:19 2019 +0000
@@ -3,23 +3,23 @@
 
 #include "mbed.h"
 #include "Adafruit_SSD1306.h"   // Adafruit_GFX library
-
+Ticker DACtimer;
 Serial pc(SERIAL_TX, SERIAL_RX);
-DigitalOut  myled(LED1);
-DigitalOut  redLed(PA_12);
+DigitalOut  Board_led(LED1);
+DigitalOut  Out_led(PA_12);
 DigitalIn   myButton(PC_13);
 DigitalIn   exButton(PC_11);
 AnalogOut  myAnalogOut(PA_4);
-
-BusOut my7Seg(PA_8, PA_9, PA_10, PC_9, PC_8, PC_7, PC_6, PA_11); // 8bit data
+bool flagTimer = 0;
+BusOut My7segment_pin(PA_8, PA_9, PA_10, PC_9, PC_8, PC_7, PC_6, PA_11); // 8bit data
             // LSB,                                      , MSB
 char    val7Seg[16] = {0x3F, 0x06, 0x5B, 0x4F, 0x66, 0x6D, 0x7D, 0x07, 0x7F, 0x6F,
                         0x77, 0x7C, 0x39, 0x5E, 0x79, 0x71};
-
 char rxData[5];
 bool flagRx = 0;
+int delay =0;
 
-#define TEST2
+#define Pr_2_3
 
 #ifdef  TEST1
 
@@ -37,7 +37,7 @@
             
             pc.printf("n=%1.2f, output = %1.2f volts\n", n, myAnalogOut.read() * 3.3f);
             // turn on the led if the voltage is greater than 0.5f * VCC
-            myled = (myAnalogOut > 0.5f) ? 1 : 0;
+            Board_led = (myAnalogOut > 0.5f) ? 1 : 0;
             wait(0.1);
         }
     }
@@ -86,3 +86,194 @@
 }
 #endif
 
+
+#ifdef Pr_1
+void DACInt()
+{
+    flagTimer = 1;
+}
+
+main()
+{
+    pc.baud(115200);
+    pc.puts("\n Test2: Starting Program \n");
+    
+    const float samplingTime = 0.00005;
+    DACtimer. attach(&DACInt, samplingTime);
+    float soundFreq = 400.0f;
+    float soundFreq_count = 0.0275f;
+    unsigned int n = 0;
+    float tempVal;
+    while(1)
+    {
+        if (1==flagTimer)
+        {
+                flagTimer = 0;
+                tempVal = soundFreq*n*samplingTime;
+                myAnalogOut = sin(2 * 3.14159 * tempVal) * 0.5 + 0.5;
+//            myAnalogOut = (sin(2*3.14159*tempVal)+sin(tempVal))*0.25+0.5;        // an angle is expressed in radians.Q
+                soundFreq = soundFreq + soundFreq_count;
+                if(2000<soundFreq) soundFreq_count = -soundFreq_count;
+                if(400>soundFreq) soundFreq_count = -soundFreq_count;
+                if(tempVal>1.0f)n=0;
+                n++;
+//                if(12000.0f < n) n = 0;
+                       
+        }
+        
+    }
+}
+#endif
+
+
+#ifdef Pr_2_3
+void ReceiveInt()
+{
+    char inChar;
+    static char rxCount = 0;
+    static char rxBuf[5];
+    
+    while(1 == pc.readable())
+    {
+        inChar=pc.getc();
+        pc.putc(inChar);
+        if ('<' == inChar)
+        {
+            rxCount = 1;
+        }
+        else if (rxCount > 0 && rxCount < 5)
+        {
+            rxBuf[rxCount - 1] = inChar;
+            rxCount++;
+        }
+        else if (rxCount == 5 && '>' == inChar)
+        {
+            rxCount = 0;
+            flagRx = 1;
+            memcpy(rxData,rxBuf,rxCount-1);
+        }
+        else
+        {
+            rxCount = 0;
+        } 
+    }  
+}
+
+void DACInt()
+{
+    flagTimer = 1;
+}
+
+main()
+{
+    pc.baud(115200);
+    pc.puts("\n Practice2: Starting Program \n");
+    pc.attach(&ReceiveInt,Serial::RxIrq);
+    
+    char tmpCommand[3];
+    int rxVal;
+    Board_led=1;
+    const float samplingTime = 0.00005;
+    DACtimer. attach(&DACInt, samplingTime);
+    float soundFreq = 400.0f;
+    unsigned int n = 0;
+    float tempVal;
+    double soundVolume = 2;
+    double squaremaker = 0.0005;
+
+    while(1)
+    {
+        if(1 == flagRx)
+        {
+            flagRx=0;
+            tmpCommand[0]=rxData[0];
+            tmpCommand[1]=rxData[1];
+            tmpCommand[2]=0;
+            rxVal = atoi(rxData + 2);
+            if(!strcmp(tmpCommand,"SI"))
+            {
+                pc.printf("Sine Wave: %d\n",rxVal);
+                soundFreq = rxVal*10.0f;
+                flagTimer = 2;
+            }
+            else if(!strcmp(tmpCommand,"SQ"))
+            {
+                pc.printf("Square Wave: %d\n",rxVal);
+                flagTimer = 3;
+            }
+            else if(!strcmp(tmpCommand,"PL"))
+            {
+                pc.printf("Play Limit: %d\n",rxVal);
+                soundVolume = 0;
+                flagTimer = 4;
+            }
+            else if(!strcmp(tmpCommand,"VL"))
+            {
+                pc.printf("Volume Limit: %d\n",rxVal);
+                soundVolume = rxVal*1.0f;
+                flagTimer = 5;
+            }
+            else if(!strcmp(tmpCommand,"TR"))
+            {
+                pc.printf("Triangle Wave: %ds\n",rxVal);
+                flagTimer = 6;
+            }
+            else if(!strcmp(tmpCommand,"SA"))
+            {
+                pc.printf("Sawtooth Wave: %d\n",rxVal);
+                flagTimer = 7;
+            }            
+        }
+
+        if (2==flagTimer)
+        {
+            flagTimer = 0;
+            tempVal = soundFreq*n*samplingTime;
+            myAnalogOut = sin(soundVolume*3.14159*tempVal)*0.5+0.5;       
+            if (tempVal > 1.0f) n = 0;      
+            n++;
+        }
+        else if (3==flagTimer)
+        {
+            flagTimer = 0;
+            tempVal = soundFreq*n*squaremaker;
+            myAnalogOut = sin(soundVolume*3.14159*tempVal)*0.5+0.5;        
+            if (tempVal > 1.0f) n = 0;      
+            n++;
+        }
+        else if (4==flagTimer)
+        {
+            flagTimer = 0;
+            tempVal = soundFreq*n*samplingTime;
+            myAnalogOut = sin(soundVolume*3.14159*tempVal)*0.5+0.5;      
+            if (tempVal > 1.0f) n = 0;      
+            n++;
+        } 
+        else if (5==flagTimer)
+        {
+            flagTimer = 0;
+            tempVal = soundFreq*n*samplingTime;
+            myAnalogOut = sin(soundVolume*3.14159*tempVal)*0.5+0.5;        
+            if (tempVal > 1.0f) n = 0;     
+            n++;
+        } 
+        else if (6==flagTimer)
+        {
+            flagTimer = 0;
+            tempVal = soundFreq*n*samplingTime;
+            myAnalogOut = sin(soundVolume*3.14159*tempVal)*0.5 + 0.5 + 0.5 * sin((soundVolume * 3.14159 * tempVal)*2) * 0.5 + 0.33 * sin((soundVolume + 3.14159 + tempVal)*3) * 0.5 + 0.5 + 0.25 * sin((soundVolume + 3.14159 + tempVal)*4) * 0.5 + 0.5 + 0.2 * sin((soundVolume + 3.14159 + tempVal)*5) * 0.5 + 0.5 + 0.166 * sin((soundVolume + 3.14159 + tempVal)*6) * 0.5 + 0.5;
+            if (tempVal > 1.0f) n = 0; 
+            n++;
+        }
+        else if (7==flagTimer)
+        {
+            flagTimer = 0;
+            tempVal = soundFreq*n*samplingTime;
+            myAnalogOut = sin(soundVolume*3.14159*tempVal)*0.5 + 0.5 + 0.33 * sin((soundVolume * 3.14159 * tempVal)*3 ) * 0.5 + 0.2 * sin((soundVolume + 3.14159 + tempVal)*5) * 0.5 + 0.5 + 0.144 * sin((soundVolume + 3.14159 + tempVal)*7) * 0.5 + 0.5 + 0.111 * sin((soundVolume + 3.14159 + tempVal)*9) * 0.5 + 0.5 + 0.0999 * sin((soundVolume + 3.14159 + tempVal)*11) * 0.5 + 0.5;
+            if (tempVal > 1.0f) n = 0;     
+            n++;
+        }      
+        
+    }
+}
+#endif
\ No newline at end of file