Forked.
Fork of mbed-dev by
Diff: targets/TARGET_STM/us_ticker_16b.c
- Revision:
- 153:fa9ff456f731
- Child:
- 165:e614a9f1c9e2
diff -r 9a67f0b066fc -r fa9ff456f731 targets/TARGET_STM/us_ticker_16b.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_STM/us_ticker_16b.c Tue Dec 20 17:27:56 2016 +0000 @@ -0,0 +1,129 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2016 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stddef.h> +#include "us_ticker_api.h" +#include "PeripheralNames.h" +#include "hal_tick.h" + +// A 16-bit timer is used +#if TIM_MST_16BIT + +TIM_HandleTypeDef TimMasterHandle; + +volatile uint32_t SlaveCounter = 0; +volatile uint32_t oc_int_part = 0; +volatile uint16_t oc_rem_part = 0; +volatile uint8_t tim_it_update; // TIM_IT_UPDATE event flag set in timer_irq_handler() +volatile uint32_t tim_it_counter = 0; // Time stamp to be updated by timer_irq_handler() + +static int us_ticker_inited = 0; + +void set_compare(uint16_t count) +{ + TimMasterHandle.Instance = TIM_MST; + // Set new output compare value + __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, count); + // Enable IT + __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1); +} + +void us_ticker_init(void) +{ + if (us_ticker_inited) return; + us_ticker_inited = 1; + + TimMasterHandle.Instance = TIM_MST; + + HAL_InitTick(0); // The passed value is not used +} + +uint32_t us_ticker_read() +{ + uint32_t counter; + + TimMasterHandle.Instance = TIM_MST; + + if (!us_ticker_inited) us_ticker_init(); + +#if defined(TARGET_STM32L0) + uint16_t cntH_old, cntH, cntL; + do { + // For some reason on L0xx series we need to read and clear the + // overflow flag which give extra time to propelry handle possible + // hiccup after ~60s + if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1OF) == SET) { + __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1OF); + } + cntH_old = SlaveCounter; + if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) { + cntH_old += 1; + } + cntL = TIM_MST->CNT; + cntH = SlaveCounter; + if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_UPDATE) == SET) { + cntH += 1; + } + } while(cntH_old != cntH); + // Glue the upper and lower part together to get a 32 bit timer + return (uint32_t)(cntH << 16 | cntL); +#else + tim_it_update = 0; // Clear TIM_IT_UPDATE event flag + counter = TIM_MST->CNT + (uint32_t)(SlaveCounter << 16); // Calculate new time stamp + if (tim_it_update == 1) { + return tim_it_counter; // In case of TIM_IT_UPDATE return the time stamp that was calculated in timer_irq_handler() + } + else { + return counter; // Otherwise return the time stamp calculated here + } +#endif +} + +void us_ticker_set_interrupt(timestamp_t timestamp) +{ + int delta = (int)((uint32_t)timestamp - us_ticker_read()); + + uint16_t cval = TIM_MST->CNT; + + if (delta <= 0) { // This event was in the past + us_ticker_irq_handler(); + } else { + oc_int_part = (uint32_t)(delta >> 16); + oc_rem_part = (uint16_t)(delta & 0xFFFF); + if (oc_rem_part <= (0xFFFF - cval)) { + set_compare(cval + oc_rem_part); + oc_rem_part = 0; + } else { + set_compare(0xFFFF); + oc_rem_part = oc_rem_part - (0xFFFF - cval); + } + } +} + +void us_ticker_disable_interrupt(void) +{ + TimMasterHandle.Instance = TIM_MST; + __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1); +} + +void us_ticker_clear_interrupt(void) +{ + TimMasterHandle.Instance = TIM_MST; + if (__HAL_TIM_GET_FLAG(&TimMasterHandle, TIM_FLAG_CC1) == SET) { + __HAL_TIM_CLEAR_FLAG(&TimMasterHandle, TIM_FLAG_CC1); + } +} + +#endif // TIM_MST_16BIT