Forked.
Fork of mbed-dev by
Diff: targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c
- Revision:
- 172:7d866c31b3c5
diff -r 89b338f31ef1 -r 7d866c31b3c5 targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_TOSHIBA/TARGET_TMPM066/i2c_api.c Thu Aug 31 17:27:04 2017 +0100 @@ -0,0 +1,343 @@ +/* mbed Microcontroller Library + * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "i2c_api.h" +#include "mbed_error.h" +#include "PeripheralNames.h" +#include "pinmap.h" + +#define I2C_NACK (0) +#define I2C_ACK (1) +#define I2C_NO_DATA (0) +#define I2C_READ_ADDRESSED (1) +#define I2C_WRITE_GENERAL (2) +#define I2C_WRITE_ADDRESSED (3) +#define SELF_ADDR (0xE0) +#define I2C_TIMEOUT (100000) + +static const PinMap PinMap_I2C_SDA[] = { + {PC1, I2C_0, PIN_DATA(1, 2)}, + {PG1, I2C_1, PIN_DATA(1, 2)}, + {NC, NC, 0} +}; + +static const PinMap PinMap_I2C_SCL[] = { + {PC0, I2C_0, PIN_DATA(1, 2)}, + {PG0, I2C_1, PIN_DATA(1, 2)}, + {NC, NC, 0} +}; + +void I2C_ClearINTOutput(TSB_I2C_TypeDef * I2Cx); +// Clock setting structure definition +typedef struct { + uint32_t sck; + uint32_t prsck; +} I2C_clock_setting_t; + +static const uint32_t I2C_SCK_DIVIDER_TBL[8] = {20, 24, 32, 48, 80, 144, 272, 528}; // SCK Divider value table +static uint32_t start_flag = 0; +I2C_clock_setting_t clk; +I2C_State status; + +static int32_t wait_status(i2c_t *obj) +{ + volatile int32_t timeout = I2C_TIMEOUT; + + while (I2C_GetINTI2CStatus(obj->i2c) == DISABLE) { + if ((timeout--) == 0) { + return (-1); + } + } + return (0); +} + +// Initialize the I2C peripheral. It sets the default parameters for I2C +void i2c_init(i2c_t *obj, PinName sda, PinName scl) +{ + MBED_ASSERT(obj != NULL); + I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA); + I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL); + I2CName i2c_name = (I2CName)pinmap_merge(i2c_sda, i2c_scl); + MBED_ASSERT((int)i2c_name != NC); + + switch (i2c_name) { + case I2C_0: + CG_SetFcPeriphA(CG_FC_PERIPH_I2C0, ENABLE); + obj->i2c = TSB_I2C0; + obj->IRQn = INTI2C0_IRQn; + break; + case I2C_1: + CG_SetFcPeriphB(CG_FC_PERIPH_I2C1, ENABLE); + obj->i2c = TSB_I2C1; + obj->IRQn = INTI2C1_IRQn; + break; + default: + error("I2C is not available"); + break; + } + + pinmap_pinout(sda, PinMap_I2C_SDA); + pin_mode(sda, OpenDrain); + pin_mode(sda, PullUp); + + pinmap_pinout(scl, PinMap_I2C_SCL); + pin_mode(scl, OpenDrain); + pin_mode(scl, PullUp); + + NVIC_DisableIRQ(obj->IRQn); + + i2c_reset(obj); + i2c_frequency(obj, 100000); +} + +// Configure the I2C frequency +void i2c_frequency(i2c_t *obj, int hz) +{ + uint64_t sck, tmp_sck; + uint64_t prsck, tmp_prsck; + uint64_t fscl, tmp_fscl; + uint64_t fx; + + SystemCoreClockUpdate(); + + if (hz <= 1000000) { + sck = tmp_sck = 0; + prsck = tmp_prsck = 1; + fscl = tmp_fscl = 0; + for (prsck = 1; prsck <= 32; prsck++) { + fx = ((uint64_t)SystemCoreClock / prsck); + if ((fx < 40000000U) && (fx > 6666666U)) { + for (sck = 0; sck <= 7; sck++) { + fscl = (fx / (uint64_t)I2C_SCK_DIVIDER_TBL[sck]); + if ((fscl <= (uint64_t)hz) && (fscl > tmp_fscl)) { + tmp_fscl = fscl; + tmp_sck = sck; + tmp_prsck = (prsck < 32)? prsck: 0; + } + } + } + } + clk.sck = (uint32_t)tmp_sck; + clk.prsck = (tmp_prsck < 32) ? (uint32_t)(tmp_prsck) : 0; + } + obj->myi2c.I2CSelfAddr = SELF_ADDR; + obj->myi2c.I2CDataLen = I2C_DATA_LEN_8; + obj->myi2c.I2CACKState = ENABLE; + obj->myi2c.I2CClkDiv = clk.sck; + obj->myi2c.PrescalerClkDiv = clk.prsck; + + I2C_Init(obj->i2c, &obj->myi2c); + NVIC_DisableIRQ(obj->IRQn); +} + +int i2c_start(i2c_t *obj) +{ + start_flag = 1; + return 0; +} + +int i2c_stop(i2c_t *obj) +{ + I2C_GenerateStop(obj->i2c); + return 0; +} + +void i2c_reset(i2c_t *obj) +{ + I2C_SWReset(obj->i2c); +} + +int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) +{ + int32_t result = 0; + int32_t count = 0; + + if (length > 0) { + start_flag = 1; // Start Condition + if (i2c_byte_write(obj, (int32_t)((uint32_t)address | 1U)) == I2C_ACK) { + while (count < length) { + int32_t pdata = i2c_byte_read(obj, ((count < (length - 1)) ? 0 : 1)); + if (pdata < 0) { + break; + } + data[count++] = (uint8_t)pdata; + } + result = count; + } else { + stop = 1; + result = I2C_ERROR_NO_SLAVE; + } + + if (stop) { // Stop Condition + i2c_stop(obj); + } + } + return (result); +} + +int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) // Blocking sending data +{ + int32_t result = 0; + int32_t count = 0; + + start_flag = 1; // Start Condition + if (i2c_byte_write(obj, address) == I2C_ACK) { + while (count < length) { + if (i2c_byte_write(obj, (int32_t)data[count++]) < I2C_ACK) { + break; + } + } + result = count; + } else { + stop = 1; + result = I2C_ERROR_NO_SLAVE; + } + + if (stop) { // Stop Condition + i2c_stop(obj); + } + return (result); +} + +int i2c_byte_read(i2c_t *obj, int last) +{ + int32_t result; + + I2C_ClearINTOutput(obj->i2c); + + if (last) { + I2C_SelectACKoutput(obj->i2c, ENABLE); + } else { + I2C_SelectACKoutput(obj->i2c, DISABLE); + } + I2C_SetSendData(obj->i2c, 0x00); + + if (wait_status(obj) < 0) { + result = -1; + } else { + result = (int32_t)I2C_GetReceiveData(obj->i2c); + } + return (result); +} + +void I2C_Start_Condition(i2c_t *p_obj, uint32_t data) +{ + status = I2C_GetState(p_obj->i2c); + if (status.Bit.BusState) { + I2C_SetRepeatStart(p_obj->i2c, ENABLE); + } + I2C_SetSendData(p_obj->i2c, (uint32_t)data); + I2C_GenerateStart(p_obj->i2c); +} + +int i2c_byte_write(i2c_t *obj, int data) +{ + int32_t result; + + I2C_ClearINTOutput(obj->i2c); + + if (start_flag == 1) { + I2C_Start_Condition(obj, (uint32_t)data); + start_flag = 0; + } else { + I2C_SetSendData(obj->i2c, (uint32_t)data); + } + + if (wait_status(obj) < 0) { + return (-1); + } + + status = I2C_GetState(obj->i2c); + if (!status.Bit.LastRxBit) { + result = 1; + } else { + result = 0; + } + return (result); +} + +void i2c_slave_mode(i2c_t *obj, int enable_slave) +{ + i2c_reset(obj); + + obj->myi2c.I2CDataLen = I2C_DATA_LEN_8; + obj->myi2c.I2CACKState = ENABLE; + obj->myi2c.I2CClkDiv = clk.sck; + obj->myi2c.PrescalerClkDiv = clk.prsck; + + if (enable_slave) { + obj->myi2c.I2CSelfAddr = obj->address; + I2C_SetINTI2CReq(obj->i2c, ENABLE); + } else { + obj->myi2c.I2CSelfAddr = SELF_ADDR; + NVIC_DisableIRQ(obj->IRQn); + I2C_ClearINTOutput(obj->i2c); + } + I2C_Init(obj->i2c, &obj->myi2c); +} + +int i2c_slave_receive(i2c_t *obj) +{ + int32_t result = I2C_NO_DATA; + + if ((I2C_GetINTI2CStatus(obj->i2c)) && (I2C_GetSlaveAddrMatchState(obj->i2c))) { + status = I2C_GetState(obj->i2c); + if (!status.Bit.TRx) { + result = I2C_WRITE_ADDRESSED; + } else { + result = I2C_READ_ADDRESSED; + } + } + return (result); +} + +int i2c_slave_read(i2c_t *obj, char *data, int length) +{ + int32_t count = 0; + + while (count < length) { + int32_t pdata = i2c_byte_read(obj, ((count < (length - 1))? 0: 1)); + status = I2C_GetState(obj->i2c); + if (status.Bit.TRx) { + return (count); + } else { + if (pdata < 0) { + break; + } + data[count++] = (uint8_t)pdata; + } + } + i2c_slave_mode(obj, 1); + return (count); +} + +int i2c_slave_write(i2c_t *obj, const char *data, int length) +{ + int32_t count = 0; + + while (count < length) { + if (i2c_byte_write(obj, (int32_t)data[count++]) < I2C_ACK) { + break; + } + } + i2c_slave_mode(obj, 1); + return (count); +} + +void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) +{ + obj->address = address & 0xFE; + i2c_slave_mode(obj, 1); +}