Diff: targets/TARGET_TOSHIBA/TARGET_TMPM066/PeripheralNames.h

Revision:

172:7d866c31b3c5

diff -r 89b338f31ef1 -r 7d866c31b3c5 targets/TARGET_TOSHIBA/TARGET_TMPM066/PeripheralNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM066/PeripheralNames.h	Thu Aug 31 17:27:04 2017 +0100
@@ -0,0 +1,100 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    SERIAL_0 = 0,
+    SERIAL_1,
+    INVALID_SERIAL = (int)NC
+} UARTName;
+
+typedef enum {
+    ADC_A0 = 0,
+    ADC_A1,
+    ADC_A2,
+    ADC_A3,
+    ADC_A4,
+    ADC_A5,
+    ADC_A6,
+    ADC_A7,
+    INVALID_ADC = (int)NC
+} ADCName;
+
+typedef enum {
+    I2C_0 = 0,
+    I2C_1,
+    INVALID_I2C = (int)NC
+} I2CName;
+
+typedef enum {
+    PWM_0 = 0,
+    PWM_1,
+    PWM_2,
+    PWM_3,
+    PWM_4,
+    PWM_5,
+    PWM_6,
+    INVALID_PWM = (int)NC
+} PWMName;
+
+typedef enum {
+    GPIO_IRQ_0 = 0,
+    GPIO_IRQ_1,
+    GPIO_IRQ_2,
+    GPIO_IRQ_3,
+    GPIO_IRQ_4,
+    GPIO_IRQ_5,
+    INVALID_GPIO_IRQ = (int)NC
+} GPIO_IRQName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        SERIAL_0
+
+#define MBED_UART0        PC2, PC3
+#define MBED_UART1        PE2, PE1
+#define MBED_UARTUSB      USBTX, USBRX
+
+#define MBED_I2C0         PC1, PC0
+#define MBED_I2C1         PG1, PG0
+
+#define MBED_ANALOGIN0    A0
+#define MBED_ANALOGIN1    A1
+#define MBED_ANALOGIN2    A2
+#define MBED_ANALOGIN3    A3
+#define MBED_ANALOGIN4    A4
+#define MBED_ANALOGIN5    A5
+
+#define MBED_PWMOUT0      PD1
+#define MBED_PWMOUT1      PD2
+#define MBED_PWMOUT2      PD3
+#define MBED_PWMOUT3      PF4
+#define MBED_PWMOUT4      PF5
+#define MBED_PWMOUT5      PJ0
+#define MBED_PWMOUT6      PJ1
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif