John Karatka
mbed
Fork of
mbed-dev
by 
mbed official
Diff: targets/TARGET_WIZNET/TARGET_W7500x/spi_api.c
- Revision:
- 149:156823d33999
- Parent:
- 144:ef7eb2e8f9f7
- Child:
- 167:e84263d55307
diff -r 21d94c44109e -r 156823d33999 targets/TARGET_WIZNET/TARGET_W7500x/spi_api.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_WIZNET/TARGET_W7500x/spi_api.c Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,202 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "mbed_assert.h"
+#include <math.h>
+
+#include "spi_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+static inline int ssp_disable(spi_t *obj);
+static inline int ssp_enable(spi_t *obj);
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
+ // determine the SPI to use
+ SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+ SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+ SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+ SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+ SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+ SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+ obj->spi = (SSP_TypeDef*)pinmap_merge(spi_data, spi_cntl);
+ MBED_ASSERT((int)obj->spi != NC);
+
+ // enable power and clocking
+ switch ((int)obj->spi) {
+ case SPI_0: CRG->SSPCLK_SSR = CRG_SSPCLK_SSR_MCLK; break; //PLL output clock
+ case SPI_1: CRG->SSPCLK_SSR = CRG_SSPCLK_SSR_MCLK; break;
+ }
+
+ // set default format and frequency
+ if (ssel == NC) {
+ spi_format(obj, 8, 0, 0); // 8 bits, mode 0, master
+ } else {
+ spi_format(obj, 8, 0, 1); // 8 bits, mode 0, slave
+ }
+ spi_frequency(obj, 1000000);
+
+ // enable the ssp channel
+ ssp_enable(obj);
+
+ // pin out the spi pins
+ pinmap_pinout(mosi, PinMap_SPI_MOSI);
+ pinmap_pinout(miso, PinMap_SPI_MISO);
+ pinmap_pinout(sclk, PinMap_SPI_SCLK);
+ if (ssel != NC) {
+ pinmap_pinout(ssel, PinMap_SPI_SSEL);
+ }
+}
+
+void spi_free(spi_t *obj) {}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave) {
+ ssp_disable(obj);
+ MBED_ASSERT(((bits >= 4) && (bits <= 16)) && (mode >= 0 && mode <= 3));
+
+ int polarity = (mode & 0x2) ? 1 : 0;
+ int phase = (mode & 0x1) ? 1 : 0;
+
+ // set it up
+ int DSS = bits - 1; // DSS (data select size)
+ int SPO = (polarity) ? 1 : 0; // SPO - clock out polarity
+ int SPH = (phase) ? 1 : 0; // SPH - clock out phase
+
+ int FRF = 0; // FRF (frame format) = SPI
+ uint32_t tmp = obj->spi->CR0;
+ tmp &= ~(0xFFFF);
+ tmp |= DSS << 0
+ | FRF << 4
+ | SPO << 6
+ | SPH << 7;
+ obj->spi->CR0 = tmp;
+
+ tmp = obj->spi->CR1;
+ tmp &= ~(0xD);
+ tmp |= 0 << 0 // LBM - loop back mode - off
+ | ((slave) ? 1 : 0) << 2 // MS - master slave mode, 1 = slave
+ | 0 << 3; // SOD - slave output disable - na
+ obj->spi->CR1 = tmp;
+
+ ssp_enable(obj);
+}
+
+void spi_frequency(spi_t *obj, int hz) {
+ ssp_disable(obj);
+
+ // setup the spi clock diveder to /1
+ switch ((int)obj->spi) {
+ case SPI_0:
+ CRG->SSPCLK_PVSR = CRG_SSPCLK_PVSR_DIV1; //1/1 (bypass)
+ break;
+ case SPI_1:
+ CRG->SSPCLK_PVSR = CRG_SSPCLK_PVSR_DIV1; //1/1 (bypass)
+ break;
+ }
+
+ uint32_t HCLK = SystemCoreClock;
+
+ int prescaler;
+
+ for (prescaler = 2; prescaler <= 254; prescaler += 2) {
+ int prescale_hz = HCLK / prescaler;
+
+ // calculate the divider
+ int divider = floor(((float)prescale_hz / (float)hz) + 0.5f);
+
+ // check we can support the divider
+ if (divider < 256) {
+ // prescaler
+ obj->spi->CPSR = prescaler;
+
+ // divider
+ obj->spi->CR0 &= ~(0xFFFF << 8);
+ obj->spi->CR0 |= (divider - 1) << 8;
+ ssp_enable(obj);
+ return;
+ }
+ }
+ error("Couldn't setup requested SPI frequency");
+}
+
+static inline int ssp_disable(spi_t *obj) {
+ return obj->spi->CR1 &= ~(1 << 1);
+}
+
+static inline int ssp_enable(spi_t *obj) {
+ return obj->spi->CR1 |= (1 << 1);
+}
+
+static inline int ssp_readable(spi_t *obj) {
+ return obj->spi->SR & (1 << 2);
+}
+
+static inline int ssp_writeable(spi_t *obj) {
+ return obj->spi->SR & (1 << 1);
+}
+
+static inline void ssp_write(spi_t *obj, int value) {
+ while (!ssp_writeable(obj));
+ obj->spi->DR = value;
+}
+
+static inline int ssp_read(spi_t *obj) {
+ while (!ssp_readable(obj));
+ return obj->spi->DR;
+}
+
+static inline int ssp_busy(spi_t *obj) {
+ return (obj->spi->SR & (1 << 4)) ? (1) : (0);
+}
+
+int spi_master_write(spi_t *obj, int value) {
+ ssp_write(obj, value);
+ return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj) {
+ return (ssp_readable(obj) && !ssp_busy(obj)) ? (1) : (0);
+}
+
+int spi_slave_read(spi_t *obj) {
+ return obj->spi->DR;
+}
+
+void spi_slave_write(spi_t *obj, int value) {
+ while (ssp_writeable(obj) == 0) ;
+ obj->spi->DR = value;
+}
+
+int spi_busy(spi_t *obj) {
+ return ssp_busy(obj);
+}
+