Diff: targets/TARGET_STM/TARGET_STM32F2/analogout_api.c

Revision:

168:9672193075cf

Parent:

167:e84263d55307

Child:

169:e3b6fe271b81

--- a/targets/TARGET_STM/TARGET_STM32F2/analogout_api.c	Wed Jun 21 17:46:44 2017 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,155 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2016, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "analogout_api.h"
-
-#if DEVICE_ANALOGOUT
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "mbed_error.h"
-#include "stm32f2xx_hal.h"
-#include "PeripheralPins.h"
-
-#define DAC_RANGE    (0xFFF) // 12 bits
-#define DAC_NB_BITS  (12)
-
-DAC_HandleTypeDef    DacHandle;
-static DAC_ChannelConfTypeDef sConfig;
-
-void analogout_init(dac_t *obj, PinName pin)
-{
-    uint32_t channel ;
-    HAL_StatusTypeDef status;
-
-    // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
-    obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
-    // Get the functions (dac channel) from the pin and assign it to the object
-    uint32_t function = pinmap_function(pin, PinMap_DAC);
-    MBED_ASSERT(function != (uint32_t)NC);
-    // Save the channel for the write and read functions
-    obj->channel = STM_PIN_CHANNEL(function);
-
-    if (obj->dac == (DACName)NC) {
-        error("DAC pin mapping failed");
-    }
-
-    // Configure GPIO
-    pinmap_pinout(pin, PinMap_DAC);
-
-    __GPIOA_CLK_ENABLE();
-
-    __DAC_CLK_ENABLE();
-
-    DacHandle.Instance = DAC;
-
-    status = HAL_DAC_Init(&DacHandle);
-    if (status != HAL_OK) {
-        error("HAL_DAC_Init failed");
-    }
-
-    sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
-    sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
-
-    if (obj->channel == 1) {
-        channel = DAC_CHANNEL_1;
-    } else {
-        channel = DAC_CHANNEL_2;
-    }
-
-    if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
-        error("HAL_DAC_ConfigChannel failed");
-    }
-
-    if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
-        error("HAL_DAC_Start failed");
-    }
-
-    if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
-        error("HAL_DAC_SetValue failed");
-    }
-
-}
-
-void analogout_free(dac_t *obj)
-{
-}
-
-static inline void dac_write(dac_t *obj, int value)
-{
-    HAL_StatusTypeDef status = HAL_ERROR;
-
-    if (obj->channel == 1) {
-        status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, (value & DAC_RANGE));
-    } else if (obj->channel == 2) {
-        status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, (value & DAC_RANGE));
-    }
-
-    if (status != HAL_OK) {
-        error("DAC pin mapping failed");
-    }
-}
-
-static inline int dac_read(dac_t *obj)
-{
-    if (obj->channel == 1) {
-        return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
-    } else if (obj->channel == 2) {
-        return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
-    }
-    return 0;   /* Just silented warning */
-}
-
-void analogout_write(dac_t *obj, float value)
-{
-    if (value < 0.0f) {
-        dac_write(obj, 0); // Min value
-    } else if (value > 1.0f) {
-        dac_write(obj, (int)DAC_RANGE); // Max value
-    } else {
-        dac_write(obj, (int)(value * (float)DAC_RANGE));
-    }
-}
-
-void analogout_write_u16(dac_t *obj, uint16_t value)
-{
-    dac_write(obj, value >> (16 - DAC_NB_BITS));
-}
-
-float analogout_read(dac_t *obj)
-{
-    uint32_t value = dac_read(obj);
-    return (float)value * (1.0f / (float)DAC_RANGE);
-}
-
-uint16_t analogout_read_u16(dac_t *obj)
-{
-    uint32_t value = dac_read(obj);
-    return (value << 4) | ((value >> 8) & 0x000F); // Conversion from 12 to 16 bits
-}
-
-#endif // DEVICE_ANALOGOUT